Hard Mod External control & basic patch from the semi modular made for Pepe Mogt

External control & basic patch from the semi modular made for Pepe Mogt from Hard-Mod on Vimeo.

Pepe Mogt of Nortec Collective (on MATRIXSYNTH)

"This special work was made with a vintage dual ghielmetti 15x15 -when you push on a pin you are making two patchs at the same time-. This video shows a complex drone patch, granular synthesis & external control with a midimplant/monomachine. The speacs from the semi modular are:

- 7 VCO saw waveform
- 4 log VCA and 4 linear VCA
- 8 LFO sine waveform
- 24 dB VCF
- Main VCA
- ADSR (the out is pre-connected to the CV in from the main VCA)
- Each VCO have a switch onf/off to FM
- CV/gate input 1/8"
- Universal power supply AC100-260V
- Outline 1/4"

The outs from the matrix are the X axys and the outs are in the Y axys:


X1A-VCO1
X1B-LFO1
X2A-VCO2
X2B-LFO2
X3A-VCO3
X3B-LFO3
X4A-VCO4
X4B-LFO4
X5A-VCO5
X5B-LFO5
X6A-VCO6
X6B-LFO6
X7A-VCO7
X7B-LFO7
X8A-VCO1
X8B-LFO1
X9A-VCO2
X9B-LFO2
X10A-VCO3
X10B-LFO3
X11A-VCO4
X11B-LFO4
X12A-VCO5
X12B-LFO5
X13A-VCO6
X13B-LFO6
X14A-VCO7
X14B-LFO7
X15A-LFO8
X15B-LFO8
________________

Y1A-VCA1
Y1B-CV1
Y2A-VCA2
Y2B-CV2
Y3A-VCA3
Y3B-CV3
Y4A-VCA4
Y4B-CV4
Y5A-VCA5
Y5B-CV5
Y6A-VCA6
Y6B-CV6
Y7A-VCA7
Y7B-CV7
Y8A-CV1
Y8B-VCO1
Y9A-CV2
Y9B-VCO2
Y10A-CV3
Y10B-VCO3
Y11A-CV4
Y11B-VCO4
Y12A-CV5
Y12B-VCO5
Y13A-CV6
Y13B-VCO6
Y14A-CV7
Y14B-VCO7
Y15A-VCF
Y15B-MAIN

Note: the CVx label is for the CV in from the VCA´s

This awesome synth is one of the electronic pioner artists from the mexican escene, Pepe Mogt a.k.a. Fussible. Thanks for all the support!

The layout design was made for Mishrael Pastrana."