MATRIXSYNTH: AtomoSynth Mochika X3 Analog Synthesizer Sequencer

Friday, August 26, 2016

AtomoSynth Mochika X3 Analog Synthesizer Sequencer

via this auction

"The new MochikaX3 features 3 independent sections: an analog synthesizer, a multimode step sequencer and a MIDI to control-voltage interface, now you can play it from a midi keyboard, a cv-gate controller or from the built in step sequencer. Also a patch bay with various inputs an outputs for each section for great flexibility, and for easy integration with other midi or CV-gate gear or Modular gear.

One analog pulse and saw waveform VCO (voltage controlled oscillator) with independent level knob for each wave.

Pulse width modulation knob

Ten turn precision tune knob to adjust octave and fine tune.

Glide effect knob.

White noise generator

One square and triangle waveform LFO (low frequency oscillator), it can modulate the VCO frequency or PWM and also the Filter at the same time.

Vactrol based Low Pass and High Pass Filter with cut off and peak controls.

Feedback switcher, it feeds the output to the audio input creating an extra puch specially on bass souds.

Filter envelope generator EG1 with decay and level control and normal/inverted envelope switcher

Loudness envelope generator EG2 with release control

Built in MIDI interface, now you can play the mochika from a midi keyboard or any midi controller, sequencer or computer.

Midi thru connector to add the Mochika X3 to your midi chain.

Built in 8 step sequencer with global tempo, gate time control, note on/off switch and pitch knob for each step.

The built in sequencer features many modes: forwad, alternate, random, repetition, random repetition, gate arpeggio patters.

The sequencer can be synchronized by an external analog pulse or by midi.

Step knob, determines the first step, great for performance.

Freeze effect button F1, also great for performance.

Oscillator mode, the Mochika becomes a drone oscillator, you can switch in real time between the 8 notes tweaking the step knob.

Sequence length from 2 to 8 steps for forward sequence modes and from 3 to 8 steps length for alternate sequence modes,

Random mode and random repetition, it generates a large pseudo random sequence.

Repetition mode in which you can define from 1 to 8 repetitions for each step.

Gate type mode in which you switch between normal gate (time defined by the gate knob) and hold, for each step.

Gate Arpeggiator with 8 patterns, you can switch in real time between the 8 notes tweaking the step knob and sync it by midi or external analog clock.

Patch bay with inputs and outputs from the synthesizer, sequencer and midi interface sections.

Rugged steel case with all the potentiometers and switchers fixed to the case.

Aluminum knobs.

Powered by an external power supply (12V AC, 2A)"

No comments:

Post a Comment


© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.