MATRIXSYNTH: Orthogonal Devices ER-101 ER-102 Demo Patch Eurorack CV Gate Sequencer

Friday, March 30, 2018

Orthogonal Devices ER-101 ER-102 Demo Patch Eurorack CV Gate Sequencer


Published on Mar 30, 2018 SonicVoltage

"Orthogonal Devices ER-101 ER-102 Warm Up Demo Patch - Eurorack CV Gate Sequencer (Full Review Soon)
In this ER 101 Sequenced eurorack patch, I am only using the ER 101.
The ER-102, Expansion Module, is not being used.

The ER-101 is a 4 tracks CV and Gate Eurorack Sequencer Module with one Gate and two CVs output per track.

Kick: Hexinverter Mutant Bassdrum
Snare: Hexinverter Mutant Snare
Hats: Mutable Instruments Branches + Analogue Solutions HH88 + Doepfer A-136 DIS

Pads:
Erica Synths Pico Voice + AJH Synth GEMINI 2412 Dual Filter

Lead Drone:
Erica Synths Pico VCO + Sputnik Modular Quand VCF/VCA + Erica Synths DSP + Doepfer A-143-2 Quad ADSR

Bass: Studio Electronics Tonestar 2600

Plucked String Type: Mutable Instruments Rings

Abstract Data ADE-32 provides external clock for the Orthogonal Devices ER-101 Sequencer.

Xaoc Devices Batumi provides a couple of LFOs"

Update:

Orthogonal Devices ER-101 ER-102 REVIEW Demo Tutorial (Part2) Eurorack Eurorack Modular Sequencer

Published on Apr 16, 2018

"In this video PART 2 we start digging deeper into the ER-102 Sequencer Controller module and specifically the ‘Part’ Arranger functionality including CV/Gate external control...

Orthogonal Devices ER-101 ER-102 - Part-2 REVIEW INDEX:

00:00 Introduction, notes about this PART 2 video and a reminder to watch PART 1 first if you are not familiar with how to use the ER-101 and ER-102

01:17 ER-102 hardware unit, interface, brief overview

04:55 ER-102: PARTS - What can PARTS do for us?
To see what ‘PARTS’ actually add to the ER-101 we first add and play Loops to tracks using the ER-101 only.
- Tracks looping parallel patterns
- Tracks looping unique patterns
Identify ER-101 limits, so we can clearly see the benefits added by the ER-102…

09:46 …what if we want to do more with our Patterns then?
- What if I want to do this... or that… etc…
- The ER-102 comes to the rescue
- Reset To… points (x tracK)
We start getting into the features of the ER-102 Part Section, display and controls
- Current Part
- Deleting Parts
- Create Parts
- Setting Reset To and Start/End Loop Point per track in a Part
- Voltage Display showing Reset and Loop Points per each track

Couple more things before we play our example Parts…
19:32 Shortcut to quickly scroll and find Start, Reset, Loop Start, Loop End, End… steps per each track
20:57 Transitions (User, First, Last) - How to launch Parts
- Then we start launching the example Parts we build earlier

25:44 Copy and Paste Parts
- Editing Parts while song/parts play

27:30 Creating Parts with Muted Tracks
- Lopping a muted step
- Creating a muted step anywhere

30:46 Using Control Voltage and Gates (CV/Gate Inputs) to select and activate Parts
- Note about using other sequencers to sequence part on the ER-102

32:30 SELF-SEQUENCING
- I use a Track on the ER-101 to sequence clip launching via ER-102 CV/Gate Inputs

37:47 Using CV and Gate signals to control parts from an external module"

Orthogonal Devices ER-101 ER-102 REVIEW Demo Tutorial (Part3) Eurorack Modular Sequencer

Published on May 14, 2018 SonicVoltage

"In this video PART 3, we start looking at the Group section on the ER-102 Sequencer Controller module and specifically using GROUPS to aid Math Transforms' Steps Selection and Rotation. Group Modifiers for Non-Destructive sequence modification.

Orthogonal Devices ER-101 ER-102 - PART-3 REVIEW INDEX:

00:00 Introduction and what are Groups? - A brief introduction to Groups, Mod Busses, Possible Transforms, Low & High Gate Modifiers.

02:32 THREE Things you need to know
02:43 - Non-Destructive Transforms
03:25 - Example… how to INVERT Transforms (Need ER-102)
07:23 - Selection INVERT & ROTATE (Need ER-102)

14:14 Patch Description
Kick, Snare, Hats, More Percussion
Hexinverter Mutant Bassdrum, Mutant Snare, Analogue Solutions HH88 Hats, Doepfer A-136 DIS Distortion Waveshaper, Mutable Instruments Branches and Peaks, Erogenous Tones Levit8)

Synth lead Sound
Studio Electronics Tonestar 2600, AJH Synth Finaliser R-EQ (delay)

Mallet type of Sound
- Erica Synth Pico VCO, Doepfer A-143-2 Quand ADSR, Sputnik Modular Quad VCF/VCA

Bass Synth
- Verbos Complex Oscillator, Doepfer A-143-2 Quand ADSR, Sputnik Modular Quad VCF/VCA

18:03 Setting Up and Using Group Modifiers and using Doepfer A-173-1 + A-173-2 for Gates.
We implement some modification for a High Gate on each Mod Bus (X, Y, Z)
We use one gate at the time or send all three High Gates together

27:16 Modification of multiple parameters for a single channel (CV-A multiple transforms e.g. Semitones, Random Range, Quantize Value all via One Gate)

30:10 Slopes (CV Inputs Multipliers)

34:!2 Notes about Copy/Paste Group Content and about the 16 Groups being all available at the same time.

35:05 Example of a setup where a High Gate activates modifiers on more than one group where each group has an effect on different steps or on a number of steps shared among multiple groups

38:52 We play with the Patch-Setup we just created and explained in section 35:05

42:06 Quick recap then Conclusion thoughts on this Part 3
Recap and notes about possibilities
Do you want to see a review of the Doepfer A-173-1 / A-173-2 Micro Keyboard (Gate/Trigger/Toggle/1v-Oct CV-Gate…)? Leave Comments below."

No comments:

Post a Comment

PREVIOUS PAGE NEXT PAGE HOME




© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH