MATRIXSYNTH: Tiptop Z8000 + Sequential Switch Videos by Station 252

Wednesday, March 14, 2018

Tiptop Z8000 + Sequential Switch Videos by Station 252


Tiptop Z8000 + Sequential Switch part 1 from Station 252 on Vimeo.

"I new about the existence of sequential switches for a long time and recently finally had a chance to try it out. I was so impressed with the results that I bought two Doepfer A-151 Quad Sequential Switches. Those little gems are an amazing addition to Tiptop Z8000 sequencer

This video is the first patch I came up with.

Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 3 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.

Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.

The Sequential switches are reset to 8 step by the Circadian Rhythms.

The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040

The bass drum is Tiptop BD808

http://tiptopaudio.com/z8000/

http://www.doepfer.de/a151.htm"


Tiptop Z8000 + Doepfer Sequential Switch part 2 from Station 252 on Vimeo.

"A second video showing Tiptop Z8000 and Circadian Rhythms sequencers with two Doepfer A-151 Sequential Switches.

Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 5 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.

Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.

The Sequential switches are reset to 8 step by the Circadian Rhythms.

The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040 > Z-DSP Chorus Card with Flanger algorithm

The bass drum is Tiptop BD808"


Tiptop Z8000 + Doepfer Sequential Switch part 3 from Station 252 on Vimeo.

My third video showing Tiptop Z8000 and Circadian Rhythms sequencers with two Doepfer A-151 Sequential Switches where A-151 is reset by different divisions of the Trigger Riot

Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 2,3,4,5,6,7,8, and 9 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.

Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.

The Sequential switches are reset to 8 step by the Circadian Rhythms.

The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040 > Z-DSP Chorus Card with Flanger algorithm

The bass drum is Tiptop BD808"

No comments:

Post a Comment

PREVIOUS PAGE NEXT PAGE Home




©2018 Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH