Tiptop Z8000 + Sequential Switch part 1 from Station 252 on Vimeo.
"I new about the existence of sequential switches for a long time and recently finally had a chance to try it out. I was so impressed with the results that I bought two Doepfer A-151 Quad Sequential Switches. Those little gems are an amazing addition to Tiptop Z8000 sequencer
This video is the first patch I came up with.
Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 3 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.
Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.
The Sequential switches are reset to 8 step by the Circadian Rhythms.
The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040
The bass drum is Tiptop BD808
http://tiptopaudio.com/z8000/
http://www.doepfer.de/a151.htm"
Tiptop Z8000 + Doepfer Sequential Switch part 2 from Station 252 on Vimeo.
"A second video showing Tiptop Z8000 and Circadian Rhythms sequencers with two Doepfer A-151 Sequential Switches.
Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 5 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.
Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.
The Sequential switches are reset to 8 step by the Circadian Rhythms.
The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040 > Z-DSP Chorus Card with Flanger algorithm
The bass drum is Tiptop BD808"
Tiptop Z8000 + Doepfer Sequential Switch part 3 from Station 252 on Vimeo.
My third video showing Tiptop Z8000 and Circadian Rhythms sequencers with two Doepfer A-151 Sequential Switches where A-151 is reset by different divisions of the Trigger Riot
Z8000 - 4 vertical 4 step sequencers are connected to the first A-151, they share the same clock and are simultaneously reset to 2,3,4,5,6,7,8, and 9 steps by the Tiptop Trigger Riot. The output of the sequential switch is connected to Tiptop QuantiZer which in turn is driving Z3000 oscillator.
Circadian Rhythms - channels 5-8 are connected to the second A-151, the output of which is driving a pair of Z4000 VC ADSRs for The VCA and Filter FM.
The Sequential switches are reset to 8 step by the Circadian Rhythms.
The voice is quite simple: Z3000 sine wave > Tiptop Fold Processor (fold is modulated by a sine wave doepfer LFO and the offset is modulated by the horizontal 16 step sequence from Z8000 slewed by Make Noise Math) > Z2040 > Z-DSP Chorus Card with Flanger algorithm
The bass drum is Tiptop BD808"
No comments:
Post a Comment
Note: To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).