via this auction
Case SN 760229120 SN 760260
"・ 112 [ SN 760254 ]
Check the output from each oscillator
Confirm that the pitch changes with the RANGE / PITCH knob
Confirm that the waveform switches with the waveform switch
Input a signal to the EXT PW MOD and check that the pitch has changed.
Connect the SYNC terminal and confirm that both oscillators are carriers
・ 121 [ SN 760267 ]
Check signal input from 112 VCO OUT (SIG IN 1,2,3) Both VCF1,2
Check that the signal is filtered with the CUTOFF / RES slider
MOD IN (1,2,3) Confirm that the filter changes with the LFO signal from 140,150 and the signal from 140 ENV for both VCF1,2
Jack of VCA SIG IN 1 is loose
・ 140 [ SN 760455 ]
Connect each OUT of ENV1 / ENV2 to MOD IN1 of 121 and MOD IN1 of 130, and press each MANUAL GATE button.
Confirm that sound changes on the time axis of VCF and VCA
・ 150 [ SN 760494 ]
Connect the CLOCK OUT / S & H OUT to the MOD IN of the 112 VCO and check that the tone changes
Confirm that signals are output from each noise (WHITE & PINK) from NOISE GEN
* Terminal jack of PINK NOISE 2 is quite loose
・ 181 [ SN 770253 ]
There is some gully at the contact point of the keyboard
Vendor top is broken
There are large scratches on the bottom
One key has a burn mark (?)
Portamento On / Off switch knob is broken (moving inside with an elongated object, On / Off confirmed)"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).