via this auction
"Serge, CGS, CLEE, Slightly Nasty, 4U Modular Synth Parts & PCB
This collection is all 4U format. These are not Eurorack format.
The front panels are all unique and custom made. The panels are based on the 'Loudest Warning' standard.
Panel height is 175mm and 2mm thick, made from anodised aluminium.
A lot of the panels already have hardware fitted, some have loaded PCBs (please see photos).
Everything in the photos is part of the whole auction lot.
Below is a list of items included.
The racks are listed and associated PCBs are listed nearer the bottom of the list (All Untested)
Not all the panels have complete hardware (see photos)
All panels are fixed to Eurorack rails(see photo)
Rack A:
CGS Dual CGS ASR panel & hardware
CGS/Serge Dual PRC with hardware and a Clee mounting bracket
CGS/Serge 1973 VCF panel & hardware
Clee 8 Channel Quantiser & hardware
CGS/Serge Triple Waveshaper & hardware
Slightly Nasty Summing Mixer & hardware
CGS/Serge SSG/Noise
Rack B:
CGS Divider/Boolean Logic Panel
Serge VCFQ panel
Serge Wave Multipliers & hardware
Serge Dual Ring Modulator & hardware
CGS Gate Sequencer & hardware
Clee "Bits" panel
CGS/Serge Extended ADSR panel
CGS/Serge Extended ADSR panel
Rack C:
CGS/Serge Dual Slope Generator & hardware
CGS/Serge Dual Slope Generator & hardware
CGS Dual VCA with loaded PCBs and Clee mounting bracket (untested)
CGS Sequencer/Programmer & hardware
----
Assorted PCBs & parts etc. (All Untested)
(some of the PCBs are partially or fully loaded, some are unloaded (see photos):
Clee 8 channel quantiser PCB Version 2.0
Clee quantiser buffer PCB 200404
Clee quantiser chip
Slightly Nasty Model 1411 PCB
Slightly Nasty Model 1411 PCB
Elby CGS 87S PCB
Elby CGS 577 1973 VCF V2.0 PCB
Elby CGS 113 Wave Multipliers V1.1 PCB
Clee "Bits" PCB & hardware PCB
Elby CGS 87S Sequencer Programmer PCB
Elby CGS 87S Sequencer Programmer PCB
Elby CGS 514 USG PCB1
Elby CGS 514 USG V2.1 PCB2
Elby CGS 381 V2.0 PCB
Elby CGS 364 V2.0 VCA PCB X2 partly loaded mounted on a Clee bracket
Elby CGS 514 USG PCB1
Elby CGS 514 USG V2.1 PCB2
Elby CGS 514 USG PCB1 & USG V2.1 PCB2 partly loaded mounted on a Clee bracket
Elby CGS 34 ASR V2.0 X2 partly loaded mounted on a Clee bracket
Elby CGS 85 V1.0 Triple Waveshaper PCB partly loaded mounted on a Clee bracket
Clee Mounting Brackets X5
Various notes, schematics & wiring diagrams
CGS Dual ASR panel, no hardware
Elby CGS 74 power distribution PCB X3, partially loaded
Some assorted spare components"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).