Circuit Bent Videonics MX- Pro Video Mixer by LoFi Future

video upload by LoFiFuture

"Available to order here: https://lofifuturestore.square.site/p...

This Videonics MX-PRO has been modified and circuit bent turning it into a powerful glitch tool kit with rock solid Time Base Correction that can be used anywhere in the world [PAL & NTSC]

PAL/NTSC MOD
One of the most functional modifications is the addition of a PAL/NTSC switch located on the back. See when Videonics produced these for different domestic markets they would use the same motherboard and chipset for all international units. They would simply include or omit one jumper on the motherboard that tells the MX-PRO what mode to boot into. I have wired this jumper up to a toggle switch on the rear of the console so you can select weather you boot into PAL or NTSC mode when you switch the unit on.

Analog Colorizer
I have integrated a 3 knob LoFi colorizer circuit that is hardwired to composite input one. It features a true bypass switch so the effect can be quickly enabled or disabled.

Arcade Buttons
There are six arcade buttons fitted to the palm rest of the unit for momentarily triggering effects. 3 control glitches for bus A and 3 control glitches for bus B. They are tied into the framebuffer RAM and the video decoders for each bus.

Toggle Switches for Bus A/B
In addition to the arcade buttons there are 4 toggle switches for each bus. These switches are all connected to a common buss allowing you to mix unsynchronised data between bus A and B resulting in scrolling artefacts.

Toggle switches for shape and edge corruption
There are 5 toggle switches located near the T-bar, these corrupt the shape and edge style transitions resulting in interesting patterns and variations of shapes.

The unit comes included with the original switching power supply (can be used anywhere in the world) and the original printed manual."