via Futureretro
Futureretro Swynx available in super limited quantities ONLY through our online store.
Using recently found old stock parts, Futureretro has built and is offering the long out of production SWYNX in super limited quantities (less than 10 units available). These use the same chassis, circuit boards, and parts as the original run (knobs are slightly different) and serves as a test for a possible re-introduction of the unit into the Futureretro catalogue in the near future.
The Swynx is a sync box that converts incoming MIDI messages to MIDI clock, DIN sync, CR-78 clock, and Analog clocks. In addition, the Swynx provides the ability to swing the timing of all these clock outputs and select different time signatures in real-time with the front panel controls, and can also act as a CR-78 pattern programmer. After you try it in your setup, you will realize just what you've been missing. For instance, many DIN sync devices do not provide a built-in swing function. And many MIDI sequencers and drum machines suffer from poor implementation of swing, preventing changes to be made live, or only providing swing for 4/4 patterns. Quite a few MIDI sequencers don't offer any swing function, including our own 777 and Mobius products. Now you can apply swing to any MIDI sequencer, and select new time signatures as well Need to sync your analog sequencer or arpeggiator with MIDI gear? No problem! Not only can you do so, but now you can swing the timing of those devices as well. You can even use the analog clock output to Gate the envelopes in a synthesizer. The clock duty cycle is 50% of a note duration. If you are a Roland CR-78 owner, you may have realized finding a WS-1 or TS-1 to program the CR-78 is next to impossible. The Swynx can replicate the programming capabilities of these units, plus provide sync to MIDI, and realtime swing adjustment. The ability to add swing to the CR-78's preset patterns alone will breathe new life into this old friend. The Swing value is accurate to 0.5% providing much more control resolution than is typically found in sequencers and drum machines. The Swynx provides 12 different time signatures to choose from. Some time signatures are duplicate, but provide different shuffle patterns for that time signature. Time signatures include 9/8, 7/8, 6/8, 5/8, 2/4, 4/4, 8/4, 3/4, and 6/4. The Swynx is all about making the gear you have sound better!
Swynx Features
Converts MIDI messages to MIDI clock, DIN sync, CR-78 clock, and analog clock
Can be used as a CR-78 pattern programmer
Control over the swing amount
Swing - 50% - 75% (0.5% resolution)
Time-signatures include 9/8, 7/8, 6/8, 5/8, 2/4, 4/4, 8/4, 3/4, and 6/4
No more NEW Vectra units will be sent out to stores after this month.
We have a very small order to fill with one US Store that will be filled by the end of May. After that, we will be out of Vectra parts and do not plan on restocking the product. The build time and cost is too excessive for us to continue this unique product. If you are wanting a Vectra and have not yet ordered a unit, the time to get them is now. Please check with your favorite stores for availability.
The 777
Many have asked, many are waiting and wanting to know details. ALL we can say at this point is that this product has been sent back to engineering. The 777 project has been a major undertaking and while close, seemingly minor issues have been exaggerated by parts availability. We continue to work towards this goal but no further information is available.
Furthermore, NO NEW manufacturing can be put in place until tariff issues are worked out.
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).