R.A. Moog Modular IIIC, 1968

Note: links to listings are affiliate links for which the site may be compensated.

via this Vemia listing

Click the auction link on top when you get there for additional listings.

This appears to be the one previously featured here with additinal pics.

"We have decided to sell our 1968 RA Moog Modular IIIC - a 3-cabinet authentic, period correct all RA Moog modules system that dates from 1968. We purchased this system in 2014 and collected it from the seller directly in the UK. The owner at that time of the sale had renowned synth-tech, James Walker, carry out a health check. After we collected it from the seller in December 2014, we set it up and fully tested it and it was all working perfectly, but it has been in storage since so will need servicing. We were told by the seller that they purchased it directly from Martin Newcomb’s Synthesiser Museum in 1999, so this RA Moog is featured in the Analog Heaven video production. We have the original VHS cassette from this, but you can now find that on YouTube, link below: https://youtu.be/IXaJnLsx1kg?si=ywAAFijJP1T6gsj2
Moog (in the USA) updated some control components in the 901A Oscillator Controllers (not the Oscillators themselves) so that the 901A Oscillators can now tune to scale across the full 5 Octaves. This modification does not of course alter the Oscillator tone.

Many of the yellow labels on the modules are no longer attached. The seller in 2014 did not know why these labels had been removed but it’s something that had been done during the lifetime of the instrument. Some modules have their yellow tags still attached, so you can see these from the photos of the reader of the cabinets below, but these are all 100% genuine RA Moog modules. System Configuration: Top Cabinet 1 960 - Sequential Controller 1 962 - Sequential Switch 1 Dual Quad Multiple w/Power Switch 1 961 - Interface 1 960 - Sequential Controller 1 962 - Sequential Switch Mid Cabinet 1 914 - Extended Range Fixed Filter Bank 1 905 - Reverberation Unit 1 992 - Control Voltages Panel 1 904-B - Voltage Controlled High Pass Filter 1 904-C - Filter Coupler 1 904-A - Voltage Controlled Low Pass Filter 3 902 - Voltage Controlled Amplifiers 1 993 - Trigger & Envelope Voltages Panel 3 911 - Envelope Generators 1 911A - Dual Trigger Delay 1 912 - Envelope Follower Bottom Cabinet: 1 901A - Oscillator Controller 3 901-B - Oscillators 1 901A - Oscillator Controller 3 901-B - Oscillators 1 901A - Oscillator Controller 3 901-B - Oscillators 1 901 - Voltage Controlled Oscillator 1 903 - White Sound Source 1 984 - Four Channel Mixer 4 Control Voltages Mixer Modules 1 Pitch/Trigger Control Module Lower Console Power Supply Module Controllers: 1 951 - Keyboard Controller (one switch missing) 1 951 - Keyboard Controller (labelled Moog)

The RA Moog has been stored in our secure facility for 10 years, so will require servicing, but we are not having this work carried out in advance of the instrument going up for sale, the reasons for this are as follows: Depending on your preference, will can have Vintage Moog specialist synth-tech, Kent Spong at KSR, carry out the servicing work once the sale is completed but we will not include restoration work to any of the modules or the wood cabinets as this historic instrument needs to be protected and conserved in its original condition. This means any servicing would be carried out sympathetically and would clean and refurbish any parts as necessary but not replace anything unless it’s a critical requirement to ensure operational stability. Some buyers may have a preferred tech do this work or in fact might prefer the Moog to be left untouched. If you would like us to have the RA Moog serviced by Kent at KSR (5000GBP paid after the auction, not via VEMIA), then the system will come with a 3-month warranty from us. If you prefer to take the RA Moog ‘as-is’ and make arrangements to have any servicing carried out by your tech then we will not be providing any warranty on the sale of the instrument. This RA Moog Modular came from the factory as a US 110V system, so we had not modified it in any way from the factory stock spec. All three cabinets operate on US 110V. We will supply two step-down transformers for use in the UK/EU in the sale. We do not have any original user or service manuals or cables with this system, other than the power cables for the cabinets.

Packing, shipping and insurance will be organised at the buyer's expense at cost. ***VAT is payable on the bid price by a UK buyer. VAT is included in the buyer's premium.***"