via this auction See the seller's other items for more.
"The MUC-400 converts midi data to analog signals for analog synthesizer or each modular analog sound hardware. You can connect up to 8 synthesizer of different midi channels (1-16) who works with volt/octave or hz/volt. You can configuration all the 16 ports with different functions, what you can see below. All midi channels and all note/controller numbers you can use. The pulse length for trigger and sync could be set at 2ms, 4ms (default), 8ms, 16ms,…, 0.5sec. The clock signal could be divide (1 - 96) to generate each clock timing.
Ports 1 to 8 are CV able and you can select the maximum voltage for 5V or 10V for signal output:Following configuration for port 1 – 8 are possible:
1. Trigger function: Activate for one note or for each note. The voltage output could be select of constant 5V or 10V or variable with velocity value (note_on) or release value (note_off).
2. Gate function: Activate by note_on/off for one note or for each note. The voltage output could be select of constant 5V or 10V or variable with velocity value (note_on).3. Synch function:
a) Trigger by MIDI clock, start, stop, reset
b) Gate by start/stop
c) Gate by stop/start
4. Volt/Octave function with spread and tune adjustment. You could combine the pitch with several gain factors!
