via this auction
"Technosaurus Micron II analog monosynth module in excellent condition. Includes power supply.
Awesome little synth, perfect for acid basslines!"
Showing posts with label Technosaurus. Show all posts
Showing posts with label Technosaurus. Show all posts
Friday, May 29, 2020
Technosaurus Microcon II
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Technosaurus Micron II analog monosynth module in excellent condition. Includes power supply.
Awesome little synth, perfect for acid basslines!"
via this auction
"Technosaurus Micron II analog monosynth module in excellent condition. Includes power supply.
Awesome little synth, perfect for acid basslines!"
Saturday, May 16, 2020
Technosaurus Microdon, Microcon II, & Cyclodon
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
TMC - 2159
TMII - 2082
TCD - 20100
"Beautifully made in Switzerland. Like new... All analog. The 2 modules can be controlled by the sequencer (16 steps) which is also midi controllable. Microcon 2 accept external input to go through the VCF filter and midi. Possibilities are endless. Very powerful system and sounds huge, especially when using the sub-mix-vco, octave -2."
via this auction
TMC - 2159
TMII - 2082
TCD - 20100
"Beautifully made in Switzerland. Like new... All analog. The 2 modules can be controlled by the sequencer (16 steps) which is also midi controllable. Microcon 2 accept external input to go through the VCF filter and midi. Possibilities are endless. Very powerful system and sounds huge, especially when using the sub-mix-vco, octave -2."
Wednesday, April 08, 2020
Technosaurus Microcon II SN 2218
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Just serviced, all pots and jacks cleaned. Power supply 220V included.
The top panel starts (from left to right) with the control section. Here you'll find a dial to adjust the Glide rate, another for tuning, and a little red trigger button so you can hear the sound.
The VCO section begins with the analogue oscillator. This can be switched between square and saw shapes, while another switch drops it up and down by two octaves. The raw sound is reinforced with a sub oscillator set to a square. A mix control sets the levels between them, while the pitch can be modulated via the LFO.
via this auction
"Just serviced, all pots and jacks cleaned. Power supply 220V included.
The top panel starts (from left to right) with the control section. Here you'll find a dial to adjust the Glide rate, another for tuning, and a little red trigger button so you can hear the sound.
The VCO section begins with the analogue oscillator. This can be switched between square and saw shapes, while another switch drops it up and down by two octaves. The raw sound is reinforced with a sub oscillator set to a square. A mix control sets the levels between them, while the pitch can be modulated via the LFO.
Monday, March 09, 2020
Technosaurus Microcon SN TMC-2200
Tuesday, February 25, 2020
Tehnosaurus Cyclodon and Microcon
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The Cyclodon is a 16-step analog sequencer. The way it works is it basically runs in a loop. There is a Tempo adjust knob, but no visual indication of what the actual BPM is. There are another 16 knobs, each of which represent a 16th-note in the 1-bar loop. Adjusting each knob determines what pitches will be played at that step, but you can not program rests. This information is transmitted out via CV/Gate, an old analog (pre-MIDI) format for controlling other CV/Gate compatible vintage synths. The Cyclodon may also receive clock/sync via Roland style DIN-Sync input. It's analog, simple and affordable - it's perfect for anyone with analog synths who want to use vintage analog-style pattern sequencers. It also works great directly with the Technosaurus ! And it's tiny too - about the size of a VHS tape."
via this auction
"The Cyclodon is a 16-step analog sequencer. The way it works is it basically runs in a loop. There is a Tempo adjust knob, but no visual indication of what the actual BPM is. There are another 16 knobs, each of which represent a 16th-note in the 1-bar loop. Adjusting each knob determines what pitches will be played at that step, but you can not program rests. This information is transmitted out via CV/Gate, an old analog (pre-MIDI) format for controlling other CV/Gate compatible vintage synths. The Cyclodon may also receive clock/sync via Roland style DIN-Sync input. It's analog, simple and affordable - it's perfect for anyone with analog synths who want to use vintage analog-style pattern sequencers. It also works great directly with the Technosaurus ! And it's tiny too - about the size of a VHS tape."
Sunday, February 02, 2020
Saturday, June 22, 2019
Technosaurus Microcon II
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Technosaurus Microcon II Synthesizer! Reminiscent of an SH-101 or TB303. Compact table-top analog mono synth with a Sub-oscillator. Excellent condition, fully functional. Includes power supply."
via this auction
"Technosaurus Microcon II Synthesizer! Reminiscent of an SH-101 or TB303. Compact table-top analog mono synth with a Sub-oscillator. Excellent condition, fully functional. Includes power supply."
Friday, February 01, 2019
Technosaurus Microcon II Real Analog Monophonic Synthesizer SN 2292 w/ Original Box
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This rare Technosaurus Microcon II is in excellent condition and perfect working order. Ships in original box."
via this auction
"This rare Technosaurus Microcon II is in excellent condition and perfect working order. Ships in original box."
Friday, November 30, 2018
Technosaurus Microcon Analog Synthesizer and Cyclodon Sequencer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Incredibly rare original editions of the Technosaurus Microcon (1997) analog synthesizer and Cyclodon (1998) step sequencer. A powerful combination. They sound amazing together. Ultra analog, with discrete circuitry.
Made in Switzerland.
The Cyclodon is in excellent condition, with very little wear. The Cyclodon shows signs of wear, as some of the lettering on the faceplate has rubbed off, as shown in photos.
Both the Microcon (original Mark I) and Cyclocon are extremely hard to find now."
SN 2121 & 2254
via this auction
"Incredibly rare original editions of the Technosaurus Microcon (1997) analog synthesizer and Cyclodon (1998) step sequencer. A powerful combination. They sound amazing together. Ultra analog, with discrete circuitry.
Made in Switzerland.
The Cyclodon is in excellent condition, with very little wear. The Cyclodon shows signs of wear, as some of the lettering on the faceplate has rubbed off, as shown in photos.
Both the Microcon (original Mark I) and Cyclocon are extremely hard to find now."
SN 2121 & 2254
Sunday, November 18, 2018
Technosaurus Microcon II
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Little VCO with a huge sound in VHS format from a Swiss company Technosaurus.
Rare and beautiful little synth. Much more than a 303 clone, sounds more like Sh-101. Midi, 12/24db filter, filter in, cv, gate."
via this auction
"Little VCO with a huge sound in VHS format from a Swiss company Technosaurus.
Rare and beautiful little synth. Much more than a 303 clone, sounds more like Sh-101. Midi, 12/24db filter, filter in, cv, gate."
Monday, November 05, 2018
Technosaurus Microcon II Analog synth with MIDI in, filter input, and CV/Gate out
Sunday, November 04, 2018
Technosaurus Microcon
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 andSH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is hand made using the same discrete circuits found in its bigger brothers.
Laid out like a 1970s monosynth, the control panel offers six sections.The VCO is, as always, the first element in the main signal path, andin use proves to be remarkably stable. Furthermore, the discrete circuitry employed should prove to be future proof, unlike synths based on Curtis chips. There are four VCO controls and likethe TB303, the Microcon offers just square and sawtooth waveforms. However, unlike its Roland forebear, it also offers a sub octavesquare wave that you can mix with the standard VCO signal in anyamount from 0 100 percent. There is also a transpose switch ( 2octaves), and LFO driven pitch modulation.
via this auction
"The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 andSH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is hand made using the same discrete circuits found in its bigger brothers.
Laid out like a 1970s monosynth, the control panel offers six sections.The VCO is, as always, the first element in the main signal path, andin use proves to be remarkably stable. Furthermore, the discrete circuitry employed should prove to be future proof, unlike synths based on Curtis chips. There are four VCO controls and likethe TB303, the Microcon offers just square and sawtooth waveforms. However, unlike its Roland forebear, it also offers a sub octavesquare wave that you can mix with the standard VCO signal in anyamount from 0 100 percent. There is also a transpose switch ( 2octaves), and LFO driven pitch modulation.
Monday, October 15, 2018
Technosaurus CYCLODON
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Note the listing states KORG in the title. Not sure what's up with that. As always, go through eBay for the buyer protection. These don't come up often.
via this auction
Note the listing states KORG in the title. Not sure what's up with that. As always, go through eBay for the buyer protection. These don't come up often.
Thursday, March 29, 2018
Technosaurus Microcon 2 Analog Synthesizer SN TMII - 2304
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Monophonic analog synthesizer. Discreet internal circuits. Has attributes of both TB303 and SH101- dual oscillator, LFO, release. Receives MIDI and some CV. Using a TRS cable, the filter can be used stand-alone. Comes with power cable."
via this auction
"Monophonic analog synthesizer. Discreet internal circuits. Has attributes of both TB303 and SH101- dual oscillator, LFO, release. Receives MIDI and some CV. Using a TRS cable, the filter can be used stand-alone. Comes with power cable."
Monday, January 08, 2018
Technosaurus Microcon II Analog Synthesizer Module w/ Original Box
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 and SH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is handmade using the same discrete circuits found in its bigger brothers.
The Microcon is a totally analog table-top synth module that's slightly smaller than the original TB-303. It has one main oscillator capable of either sawtooth or square waveforms, just like the TB-303. The addition of a sub-oscillator is more like SH-101, which can help beef up your bass sounds. The analog lowpass filter is switchable as either 2-pole (12dB/oct) or 4-pole (24dB/oct), which is better than the TB-303 or SH-101 offered. The LFO can modulate the filter cutoff frequency with either triangle or square wave and the VCO can be modulated by square or triangle waves. Simple attack and decay envelope controls and a Glide effect round out this fairly simple to use and highly affordable 303 clone. The Microcon only uses CV and Gate for being controlled externally.
The Microcon II adds MIDI, making this cool little mono-synth available to the masses! The Microcon II has all of the features of the original, but adds MIDI IN for performance and control of parameters such as accent, cutoff frequency and glide. Also new are a filter input to process external signal sources, CV/Gate outputs added, and the Microcon II can be used as a midi to CV converter for other CV/GATE gear."
via this auction
"The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 and SH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is handmade using the same discrete circuits found in its bigger brothers.The Microcon is a totally analog table-top synth module that's slightly smaller than the original TB-303. It has one main oscillator capable of either sawtooth or square waveforms, just like the TB-303. The addition of a sub-oscillator is more like SH-101, which can help beef up your bass sounds. The analog lowpass filter is switchable as either 2-pole (12dB/oct) or 4-pole (24dB/oct), which is better than the TB-303 or SH-101 offered. The LFO can modulate the filter cutoff frequency with either triangle or square wave and the VCO can be modulated by square or triangle waves. Simple attack and decay envelope controls and a Glide effect round out this fairly simple to use and highly affordable 303 clone. The Microcon only uses CV and Gate for being controlled externally.
The Microcon II adds MIDI, making this cool little mono-synth available to the masses! The Microcon II has all of the features of the original, but adds MIDI IN for performance and control of parameters such as accent, cutoff frequency and glide. Also new are a filter input to process external signal sources, CV/Gate outputs added, and the Microcon II can be used as a midi to CV converter for other CV/GATE gear."
Thursday, January 04, 2018
Technosaurus Microcon + Cyclodon 1998 SN TMC-2299 & TCD-2244
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Here we have a really cool pair of swiss made synth gear.
Made by deluxe modular synth builder Technosaurus end 90s until 00 somewhat.
Sounding surprisingly interesting, charming, fat. Great build quality."
via this auction
"Here we have a really cool pair of swiss made synth gear.
Made by deluxe modular synth builder Technosaurus end 90s until 00 somewhat.
Sounding surprisingly interesting, charming, fat. Great build quality."
Friday, June 16, 2017
Technosaurus Microcon II Analog Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Super rare, incredible little synth in great condition. Big beefy sounds. Includes power adapter.
Very flexible sounds. Can also be used as a MIDI-CV converter!
The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 and SH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is handmade using the same discrete circuits found in its bigger brothers.
The Microcon is a totally analog table-top synth module that's slightly smaller than the original TB-303. It has one main oscillator capable of either sawtooth or square waveforms, just like the TB-303. The addition of a sub-oscillator is more like SH-101, which can help beef up your bass sounds. The analog lowpass filter is switchable as either 2-pole (12dB/oct) or 4-pole (24dB/oct), which is better than the TB-303 or SH-101 offered. The LFO can modulate the filter cutoff frequency with either triangle or square wave and the VCO can be modulated by square or triangle waves. Simple attack and decay envelope controls and a Glide effect round out this fairly simple to use and highly affordable 303 clone. The Microcon only uses CV and Gate for being controlled externally.
The Microcon II adds MIDI, making this cool little mono-synth available to the masses! The Microcon II has all of the features of the original, but adds MIDI IN for performance and control of parameters such as accent, cutoff frequency and glide. Also new are a filter input to process external signal sources, CV/Gate outputs added, and the Microcon II can be used as a midi to CV converter for other CV/GATE gear."
via this auction
"Super rare, incredible little synth in great condition. Big beefy sounds. Includes power adapter.
Very flexible sounds. Can also be used as a MIDI-CV converter!
The Microcon is a modern-day little analog monophonic synthesizer module emulating the simple design and sound of classic Roland TB-303 and SH-101 synths. They are made by Technosaurus, a Swiss company best known for their high-end Selector modular synths. It is handmade using the same discrete circuits found in its bigger brothers.
The Microcon is a totally analog table-top synth module that's slightly smaller than the original TB-303. It has one main oscillator capable of either sawtooth or square waveforms, just like the TB-303. The addition of a sub-oscillator is more like SH-101, which can help beef up your bass sounds. The analog lowpass filter is switchable as either 2-pole (12dB/oct) or 4-pole (24dB/oct), which is better than the TB-303 or SH-101 offered. The LFO can modulate the filter cutoff frequency with either triangle or square wave and the VCO can be modulated by square or triangle waves. Simple attack and decay envelope controls and a Glide effect round out this fairly simple to use and highly affordable 303 clone. The Microcon only uses CV and Gate for being controlled externally.
The Microcon II adds MIDI, making this cool little mono-synth available to the masses! The Microcon II has all of the features of the original, but adds MIDI IN for performance and control of parameters such as accent, cutoff frequency and glide. Also new are a filter input to process external signal sources, CV/Gate outputs added, and the Microcon II can be used as a midi to CV converter for other CV/GATE gear."
Tuesday, February 28, 2017
Technosaurus Microcon, Rare Swiss Analog Synthesizer
Wednesday, February 22, 2017
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
