E-Mu Drumulator with Pad Programmer

via this auction. Sent my way via z.

MOOG Memorymoog Plus

Title link takes you to shots via this auction. Link sent my way via Scott Metzger.

Anyone know the difference between the Plus and the L.A.M.M. or if they are actually the same?

MOOG Memorymoog L.A.M.M. - Lintronics

Click here for more shots via this auction.

"Hardware Upgrades Include:
* Five new jacks are installed on the rear expansion slot's cover plate: MIDI IN and MIDI OUT ports, a 1/4" stereo output jack, a 1/4" mono output jack and a FILTER input jack. Stereo output circuitry is added. If the mono output jack is used simultaneously with the stereo output jack, then the Memorymoog's six voices are spread across the stereo field (the placement of the individual voices is fixed internally). The volume of the stereo output can be adjusted only with the programmable volume pot, and the value can be stored with each individual sound.
* An analog noise circuit is added to the stereo output board to avoid the digital loop effect of the original noise generator.
* The power supply is checked for cold solder points and defective components.
* The six voice cards are removed, checked, repaired if necessary, and modified for the Lintronics Autotune algorithm. Forty-six oscillator adjustments are replaced with high-stability precision multi-turn potentiometers. Oscillator capacitors and resistors are replaced with high stability parts.These modifications ensure the long-term stability of the oscillators.
* All system boards are removed, checked for cold solder joints, tested, and repaired if necessary. Modifications for pitch bending, modulation wheel, foot pedal, and octave signals are made. After these modifications, the cutoff frequency in Keyboard Tracking mode is not only controllable by the keyboard, but also by the transpose switch, tune control, and pitch wheel.
* The Octave Board is modified so that the setting of the octave switch can be stored on a per-sound basis.
* The Digital Board is rebuilt so that the reset switch functions reliably. Microprocessor and program ROMs are replaced with upgraded components. MIDI interface circuitry is added.
* The front panel components are removed, checked, and replaced if necessary. The front panel is cleaned, and missing or damaged knobs are replaced with original Moog parts as availability permits.
* After the upgraded circuit boards are reinstalled, the instrument is 100% tested, then allowed to burn in for 7 days, then tested again."

via Scott Metzger

Some Casio's 81, 82, 83, 84!

flickr by Neil Vance.

click here for the full size shot.

"VLT-1's VLT-5's PT-30 CZ-101"

Roland Alpha Juno 1 and 2 Keyboard Replacement

Title link takes you to the tutorial by Erick.

Modular Synthesizer Cabinets

Title link takes you there. via motmsynth.

Roger Waters MSG - On The Run - Time May 30, 2007

YouTube via bkaplan00. via Nusonica where you will find one more vid.
"What is unique about this is the side angle. Notice Harry Waters using the VCS3 synth [actually a Synthi AKS - essentially the same synth in a suitcase with sequencer] for On The Run. Then Roger Walks behind him followed by walking inbetween Harry & the screen (which for 95% of the people Roger is out of sight. Also note the camera swings to the plasma on the side of the stage that shows what is / will be projected on the screen. Then Time is complete with Breathe Reprise"

Oscillator

flickr by Leadtowill.

"An all analogue square wave oscillator housed in an ancient capacitor case. Pitch is controlled by light and by dial."

click here for the full size shot.

RadioSynth_diagram

flickr by Neighborhood Public Radio.

"A diagram for the "radio synth" Michael Trigilio is trying to put together at the Headlands Center for the Arts"

Matrixsynth on Facebook

Title link takes you to a group I just created on Facebook. You have to be a member of Facebook to join, but don't worry, this site is my priority. I will be focusing my energy posting stuff here. I'm just getting familiar with Facebook and their groups, so bear with me, but if you are a member of Facebook feel free to to join. I will of course be looking for interesting stuff that comes in, to post here. For more info on why Facebook is interesting, see this video.