Friday, February 08, 2013
"MAESTRO" - SOVIET SYNTHESIZER
Published on Feb 8, 2013 dergach11·8 videos
"Tribute to the Formanta Radio Factory in Kachkanar, USSR."
CMOS beat box triggers In Line Effects Drumfire synth
Published on Feb 8, 2013
"hex schmitt trigger based beat box triggers 2 channels on the In - Line Effects Drumfire synth."
"hex schmitt trigger based beat box triggers 2 channels on the In - Line Effects Drumfire synth."
Standuino microGranny - pocket-sized handmade granular sampler
microGranny - pocket-sized handmade granular sampler from standuino on Vimeo.
"Standuino microGranny is pocket sized handmade granular sampler. It uses microSD card to store samples. You can adjust many parameters of the samples and trigger them by MIDI.
more info: http://www.standuino.eu/devices/instruments/microgranny/
buy: http://www.standuino.eu/buy/buy-fraangelico/
Features:
-basic parameters of sound: pitch, crush, volume, start, cut, repeat
-micro sampling parameters of sound: shift speed, loop length, shift direction (forward,backward,random1,random2)
-lfo parameters of sound: rate, amount, destination (pitch, crush)
-instant loop feature
-micro SD card slot (plays monophonic wav samples)
-8 presets (15 sounds each)
-MIDI input (MIDI through by special connector)
-intuitive interface
-3 digit 7-segment display to keep track of editing
-2 pots to tweak the parameters
-mode switching buttons
-4 perfect response trigger buttons
-hold button
-3.5mm jack output
-volume trim-pot
-size: 11 x 7 x 4 cm
-input voltage 9-12 V"
RITM-2 - RARE VINTAGE SOVIET ANALOG SYNTHESIZER
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Control panel parameter translation below.
via this auction
Control panel parameter translation below.
Pamelas Syncrones
Published on Feb 8, 2013 maertsemil·22 videos
"Pamelas Workout, Syncrodyne, MakeNoise, Maths,WMD, GeigerCounter, Intellijel, Korgasmatron, Doepfer, A199, SpringReverb, Modular, Cylonix, Cyclebox, Modular, FM, Synthesis, ZorlonCannon, Wogglebug, PistonHonda, Harvestman"
"Pamelas Workout, Syncrodyne, MakeNoise, Maths,WMD, GeigerCounter, Intellijel, Korgasmatron, Doepfer, A199, SpringReverb, Modular, Cylonix, Cyclebox, Modular, FM, Synthesis, ZorlonCannon, Wogglebug, PistonHonda, Harvestman"
AMSynth AM8109 Jupiter-8 VCF
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"AM8109 JP8 VCF Summary
This module is replication of the Low Pass Filter from the legendary Roland Jupiter 8 and 4.
This is a 2 and 4 pole OTA design that Roland first used in the Jupiter 4 in 1980, replacing a discrete version of the filter which took up more PCB space.
This is a warm sounding filter with smooth frequency control and a resonance that gradually increases up to full self oscillation, a sound very reminiscent of the early 1980's. The difference between 2 and 4-pole modes is not dramatic, with the 2-pole mode providing a more gradual cutoff slope and silky sound.
EuroRack Module: 14HP wide
Detailed Description
This module is an accurate reprodution of the Jupiter 8 low pass voltage controlled filter, using the original IR3109 OTA chip in the filter core. The design has been updated to use modern components (such as OTA capacitors and high quality Op Amps). It delivers a very warm and smooth sound.
There are front panel controls for adjusting the Cutoff Frequency and Resonance as well as the level of 2x control voltages and 3x audio signal inputs. Resonance is smooth and controllableto self-oscillation.
There are six 3.5mm jack sockets on the right of the front panel;
•Audio Signal output
•2x control voltages
•3x audio inputs.
The slope of the filter can be switched between 2 and 4 poles using a small red push button, and a red LED with lens shows the filter slope selected."
via this auction
"AM8109 JP8 VCF Summary
This module is replication of the Low Pass Filter from the legendary Roland Jupiter 8 and 4.
This is a 2 and 4 pole OTA design that Roland first used in the Jupiter 4 in 1980, replacing a discrete version of the filter which took up more PCB space.
This is a warm sounding filter with smooth frequency control and a resonance that gradually increases up to full self oscillation, a sound very reminiscent of the early 1980's. The difference between 2 and 4-pole modes is not dramatic, with the 2-pole mode providing a more gradual cutoff slope and silky sound.
EuroRack Module: 14HP wide
Detailed Description
This module is an accurate reprodution of the Jupiter 8 low pass voltage controlled filter, using the original IR3109 OTA chip in the filter core. The design has been updated to use modern components (such as OTA capacitors and high quality Op Amps). It delivers a very warm and smooth sound.
There are front panel controls for adjusting the Cutoff Frequency and Resonance as well as the level of 2x control voltages and 3x audio signal inputs. Resonance is smooth and controllableto self-oscillation.
There are six 3.5mm jack sockets on the right of the front panel;
•Audio Signal output
•2x control voltages
•3x audio inputs.
The slope of the filter can be switched between 2 and 4 poles using a small red push button, and a red LED with lens shows the filter slope selected."
Roland GR-300 Polyphonic Guitar Synthesizer with Original Box
Division 6 Filatre SEIII Multimode Filter Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
See Perfect Circuit Audio (RSS) for more.
"The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available. It also includes a notch output which allows you to change the balance between low-pass and high-pass. The SEIII uses discrete components but is based on SSM2040 architechture, giving you a very musical sounding filter. There are CV inputs for frequency, resonance and notch balance. The 1 V/O CV input for frequency can be used to have the VCF follow what you're playing on the keyboard or just crank up the resonance and use it to play sine-waves."
via this auction
See Perfect Circuit Audio (RSS) for more.
"The Filtare SEIII is a multimode, state-variable voltage-controlled filter that gives you low-pass, band-pass and high-pass outputs which are all simultaneously available. It also includes a notch output which allows you to change the balance between low-pass and high-pass. The SEIII uses discrete components but is based on SSM2040 architechture, giving you a very musical sounding filter. There are CV inputs for frequency, resonance and notch balance. The 1 V/O CV input for frequency can be used to have the VCF follow what you're playing on the keyboard or just crank up the resonance and use it to play sine-waves."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
