Sequential Circuits TOM Drum Machine with Manual & Spec Sheet

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

CLICK FOR MORE »

Analogue Solutions StationQ Sequencer

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)

"Station Q is like half an Oberkorn sequencer. It is identical to Oberkorn, except that is is 8 step instead of 16, and does not have the MIDI features.

The Station Q is the perfect companion to the Station X/Y mini-modular combo.

Get the manual HERE

Features

24 CV knobs, 8 gate switches, 9 leds
3 x CV channels, 2 x gate channels
CV control of speed / tempo
Control of sequence position (step number)
Rugged steel construction"

Analogue Solutions Station X Analog Modular Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.
via this auction and this auction

Note one is for the cased version and one is for the module version.

"Station X is a compact "mini-modular" synthesiser. It contains all the essential ingredients to form complete synth patches.

Think of it as a mini Red Square or Tereshkova (two other, larger modular synths we produce). In fact, a mini Red Square is a good analogy. If has the same filter and similar key features (though Red Square is 2 VCO).

Station X is ideal for beginners who want to dip their toes into the world of modular synths, the travelling producer who wants to take a true analogue modular synth around to different sessions, or home musician who perhaps is limited for space.

Station-X comes with 5 splitter leads, so you can feed a signal (source) to 2 destinations. This is like having 5 mini-multiple modules built in.

Components

MIDI to CV Converter (so you can play it from MIDI).
Voltage Controlled Oscillator with pulse width control input.
Low Pass 'Moog' style filter, 24dB/oct.
Voltage Controlled Amplifier (wired in series to the VCF).
Envelope Generator.
VC Low Frequency Oscillator. Four waveforms and CV controlled of frequency.
Noise Generator.
Sample and Hold.
Features

Pure analogue voice circuitry
Fully patchable
Compact modular synth
Available as a module (without case)
Plenty of modulation possibilities
Rugged steel construction.
MIDI In for software sequencer / keyboard control."

Analogue Solutions Leipzig-SK Keyboard Synthesizer Sequencer

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)

"The SK is almost identical to the S. But with the addition of a MIDI controller keyboard.

Differences between Leipzig-S/SK and the original Leipzig

Envelopes are now full ADSR
EGs can be disconnected from MIDI trigger
VCO2 can be disconnected from MIDI (free running modulator!)
Analogue step sequencer
VCF can be modulated from either EG1 or EG2
Features

Pure analogue voice and modulation circuitry
Fat Moog style transistor ladder filter
2 x VCOs with glide and sub-VCOs
Plenty of modulation routing possibilities
Analogue step sequencer with plenty of clocking options
Audio input so can be used as a sound processor
Rugged steel/aluminium construction
MIDI input for software sequencer control
LCD to enable editing of keyboard set-up (transpose, pitch bend range, retrig, etc)
Internal power supply
Because each parameter is not under solid CPU control, each parameter has that tiny analogue drift that adds so much to character
None of the parameters or controls are quantised. So when you turn a knob, you are turning a resistor that affects a real analogue circuits"

Analogue Solutions Leipzig-S Rack Synthesizer Sequencer

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)
Quick note: I don't want to get into policing auctions but I heard the price for this one is a little high. Perfect Circuit usually has great prices imo, so I will check with them.

Update: I heard back. They are following MAP prices set in place by the manufacturer according to a recent price change. They aren't allowed to lower the price and they do ship for free.

Original post description:
"Coming Analogue Solutions are proud to announce availability of Leipzig-S, the latest addition to its lengthening line of critically-acclaimed, quality-crafted boutique designs from founder Tom Carpenter in the true spirit of vintage analogue synthesisers befitting the true analogue synth enthusiast.

Evolving from its namesake Leipzig (rack-mounting) and Leipzig-k (keyboard-endowed) analogue monosynth predecessors, the rack-mountable/tabletop Leipzig-S literally goes several steps further by incorporating an in-built eight-step analogue sequencer that can be used to produce simple melodic lines as well as acting as a modulation source to affect the filter cutoff (or to create additional effects, depending on other control settings). VCO1, VCO2, and the VCF are all available as sequencer destinations; seemingly simple, yet favourably flexible, the step sequencer can be creatively controlled (clocked) by multiple sources, at audio frequencies (using VCO2 as a clock source), or using the output of the sequencer itself as an audio source to be played via MIDI while the eight step controls then alter the waveform/tonal content, for example, such are the adventurous advantages of packaging an analogue step sequencer with a true analogue monosynth.

The entire design is traditional early-eighties analogue (voice and modulation) circuitry, comprised entirely of discrete components and op-amps (bar, of course, the digital sequencer controller and MIDI-CV interfacing); since the Leipzig-S is a strictly no-memory affair, all controls are not quantised, resulting in an authentically vintage sound, replete with musically desirable quirks and subtle artifacts (much in the same way that, say, a valve amp or vinyl record adds sonic character), unlike some other modern analogue synths that arguably sound almost as perfect as DSP analogue modelling.

With electronic percussion having influenced the choice of routings, the Leipzig-S boasts a huge range of modulation possibilities to facilitate creating the widest possible range of sounds, including deep basses, sound effects, analogue loops and (obviously) electronic drum sounds. With this, his latest design, true analogue synth enthusiast Tom Carpenter is confident that he has achieved a modern analogue synth that truly does sound vintage.

Features

Pure analogue voice and modulation circuitry
2 x VCOs (each with Glide and Sub-VCOs)
Osc sync and cross-mod
Flexible modulation routing
Rugged steel/aluminium construction
Leipzig-S modulation choices provide for good drum possibilities"

Analogue Solutions Telemark V2

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

"Introducing the Telemark V2! New features include VCO-Subs and Ring-Mod.

Telemark is a rack mount version of the Semblance mononsynth with the addition of signal patch points. Will run from MIDI or sequence it the analogue way - use our Oberkorn, ideal partnership! Comes with rack mount brackets.

The patch points are 3.5mm with 5v range, one volt per octave. Currently at the Noisebug studio we are running the Telemark with an Analogue Solutions Oberkorn3 sequencer. It’s quite fun and getting synthesizer action is instant and patching isn’t required.

The Telemark is robust in frequency. There is a good amount of clarity including while filtering. On the bottom end, the bass breaks up nicely at the right time. The bass frequency doesn’t resonate in the lofty or boomy territory but very acceptable for most recording environments and noticeably better than the typical modular VCO. The Telemark has a pleasing tone all of its own but would sound closest to the old Oberheim sound. The design is logically laid out and we adapted to it very quickly.

Inspired by the Oberheim SEM, this monophonic module features 2 audio osc + seperate lfo, a complicated multimode filter, mixer and 2 env generators. It also features a POLY mode allowing you to chain 4 SEMblances."

Analogue Solutions Europa MIDI Step Sequencer

via this auction
Perfect Circuit Audio (RSS)

"Europa is a hardware sequencer, it does not contain a 'sound engine'. It has been designed from the ground up to be utilised with your MIDI synths, analogue modular, drum brains and drum machines.

Eurpoa was designed to be utilised with our SQ8 and Oberkorn analogue sequencers (and anything else with a compatible clock input).

Either use the main sync out or one of the seven trigger outputs to clock your analogue sequencers. Have them step whenever you like by programming triggers into the Europa sequencer. You can have 2 sequencers play alternately. You can mute the track so the Oberkorn/SQ8 sequencer stops! Use another trigger and you can activate the reset feature of the Oberkorn/SQ8!

Features

Intuitive and simple programming procedure
No sub-menus or shift keys - one function per key
Simple to use - TR808/606 style programming.
Analogue features - analogue tempo clock, 7 analogue trigger outs, analogue sync signals
Live editing features
Transpose, Octave shift, Mute
Rugged steel construction"

Analogue Solutions Telemark-K

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

"The Telemark provides exactly the same features as the Semblance, but with the addition of modular synth patch points. This in effect turns it into a semi-modular design and means it can be interfaced to other modules and synths very easily.

The Telemark is a sturdily made white metal wedge, populated on the left side of the panel by lots of knobs and a few LEDs. The right side is devoted to a series of 1/8" sockets designed to provide access to core points in the synth's signal path. The back panel has a small socket for the supplied external PSU, MIDI input/thru, as well as 1/4" jack sockets for the main audio output and 2 external audio inputs.

The Telemark is an easy-to-use and fine-sounding synth, which is capable of a wide range of sounds. It uses the patch panel to add another dimension and offers some great options for processing external audio as well as transforming the internal palette. The MIDI spec gives the Telemark the ability to respond to both note on/off and velocity information for VCA and VCF sections. The patch panel allows you to route these elsewhere should you need to and a MIDI controller can be assigned to modulation duties should you wish.

The Telemark is a Oberheim SEM inspired synth like the Anyware Tinysizer, the Semtex XL and the Analogue Solutions Semblance are.

The Telemark-K is similar to original SEM but with Sample and hold, LFO square wave, noise, extra inputs, many more signal modulation options via rotary switches.

Features

Pure analogue voice & modulation circuitry.
MIDI In / Out / Thru
Patch points to allow more sound types, and to cross-patch with your modular synths
SEM type sound.
Similar SEM layout.
More features than the original SEM such as Sample and Hold, LFO Square wave, Noise, extra inputs, many more signal modulation options via rotary switches.
Plenty of modulation possibilities
Rugged steel construction.
MIDI In for software sequencer / keyboard control.
LCD to edit MIDI set-up.
No patch memories! You can be original each time you create a sound."

Snazzy FX Dreamboat Dual Oscillator Eurorack Module

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)

"The Dreamboat is a dual chaotic oscillator with 2x CV inputs, a Gate output with adjustable threshold, and two sets of X and Y outputs. There are two oscillator sections to the module, the top half is an audio rate chaotic oscillator and the lower half outputs LFO rate signals. With its five outputs, the Dreamboat allows you to connect to plenty of modules all at once, allowing all kinds of modulation and listening possibilities.When used with an oscilloscope or a scope program in X/Y mode, the Dreamboat allows you to view its chaotic attractors in realtime.

Allowing for unique rhythms through the use of the gate output, a typical setup might see the Dreamboat involved in a few feedback loops while controlling an ADSR and a VCA with its gate output. Hear and view the Dreamboat at the same time by multiplying the output

The Dreamboat is easy to use, just turn the knobs until the Chaos starts, then add modulation, cross-couple the two sections, and bring in a VCO or Noise module. For even more far out sounds, we recommend the use of two or even three Dreamboats for a truly powerful setup. Though the Dreamboat is not an oscillator in a way you might be used to, it will push you into new musical directions.

From subtle to destructive, from scary to absurd, the Dreamboat is a strange bird.

Use the Dreamboat to create everything from strange fogs to banging pots and pans, use it to explore Chaos or simply to have a truly unique module in your setup.

Snazzy FX recommends Gleick's classic book CHAOS for those who want to know a bit more about what is going on behind the scenes in this module.

Features

Pitch knob per oscillator
CV knob per oscillator
Gate input with Threshold knob
2 X & Y outputs
2 CV inputs"

Snazzy FX Chaos Brother Eurorack Module

via this auction
Perfect Circuit Audio (RSS)

"The Chaos Brother is a new modulation module full of enough options and knobs to keep it interesting no matter where you decide to use it.

It all starts with the Chaos knob, when turned all the way to the left, you get repetitive, tame oscillations like you would find in a basic LFO. Start turning the knob to the right and the Chaos ensues. The speed of the chaos can be adjusted with the speed knob so there is a wide range of variation possible.

With Speed AND Chaos knobs, it is very easy to dial in just the right amount of craziness. At times like an LFO, other times generating wild patterns, jagged waveforms, or even strange bass blasts. Use it to add vibrato to a melody, out of this world sweeps, hiccups, slow swirls, or use the smooth out for more subtle controlled modulation.

With a CV input, you can have the whole cloud of modulation stop and start, melt and reform ON THE BEAT, synced to your sequencer or a sharp LFO.

Things get more interesting when you take advantage of the gate output. This single output allows the performer to create chains of percussion. Drive the Chaos Brother with a gate, and then drive the rest of your system with the Chaos Brothers gate out. Flip the threshold till it's just right, take one of the three outputs (x, y and smooth) and plug them in all over the place.

Modulate your VCO's and your filters, trigger your envelopes, clock your sequencer, and cross-modulate to your hearts content.

Features

Chaos knob
Speed knob
CV knob
Smooth knob
Gate knob
X & Y inputs
CV input
Gate input
Smooth input"