MATRIXSYNTH

Snazzy FX Ardcore Expander Eurorack Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
Perfect Circuit Audio
"Add even more flexibility and power to your Ardcore with the new Expander!

First off , 8 buffered trigger /gate outs (10v to gurantee that even the most finicky vcas will open!!) and 8 LEDS allow for a whole new type of Ardcore sketch: clock dividers, gate sequencers, variation generators, etc.

Also, two additional BI-POLAR CV/audio inputs with attenuators. (Arduino A4 and A5) These are great for quantizers and other programs which benefit from both sides of a bi-polar waveform. No external offset needed!

And for maximum ease of use, PINS 11 and 13 have been added as separate outs with RC filters. So many Arduino sketches default to pin 11 that we thought it would be nice to have the option of plugging straight in. So now you can use the DAC or pin 11. Or the Dac and PIN 13. Or any combination.

And with the added RESET button, selecting individual sketches within one of the Compound Multi-Sketches is super easy!!!

Don't Forget: The Expander allows you to start taking advantage of new programs! And it adds more controls (OR CV INPUTS) to complex performance sketches like The multi-mode arppegiator!

Its never been easier to add 60 modules worth of functionality to your Modular. And with the Ardcore Expander, you can load even more preset programs, edit in even more CV control, or create more complex sketches.

Features

8 additional trigger/gate outputs with LED indicators
2 additional bi-polar CV/Audio inputs with attenuators
Pins 11 and 13 available as outputs with RC filters
Reset button"

Snazzy FX Wow and Flutter Tape Style Delay Eurorack Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction
Perfect Circuit Audio

"Sweet, warbly, tape style delay for your Eurorack Modular!

Years after the release of the revered Wow and Flutter, the eurorack module version is finally here! Not only does it live up to the original, it has a bunch of new features. Since this is for your modular synthesizer, the headroom has increased to 10 volts peak to peak. Effects possible with this module range from subtle tape warble to full-on pitch weirdness, snapback delay, rubbery sounds, dark echo, delayed swells, and self-oscillating feedback madness.

Use it as a regular delay by turning down the Warp knob, the color is dark and soft. Turn up the warp halfway and you begin to get pitched delays and warbly goo. Turn Warp all the way up and it has a unique sound all its own. For those of you who have never tried a Wow and Flutter, it is so much more than a delay. In fact the original intent of the box wasn't delay at all, it was the sound of the tape machine eating your tape. But it CAN do delay. And it can also do spiky sounds. And boing sounds. You just have to play with it. And using it on drums and synths allows a whole new basket of sounds to crash through your speaker

We have added CV control of Delay time (attenuated by the Depth knob) as well as an external envelope input AND Cv control of Decay time. So you have external control of 3 parameters. We have also added two feedback modes. With the toggle switch in the top position the feedback is very calm and resembles the original stompbox. With the toggle flipped down, WATCH OUT! At max feedback it only takes a second or two to go into self-oscillating distortion. But turn it down just a touch, and you can get quite a bit of control over your dubbed out explorations.

The attack and decay controls are exactly as they were on the original, but a jumper is on the back of the module for those who wish to take their Warbles into extreme regions. Simply move the jumper into FAST mode.

We have also future-proofed this module by adding an expander port in the back. Coming sometime in late 2013 you can expect an expander which will add even more modulation weirdness and control to your new favorite delay module!

And that's not all. There are two extra jacks which were not found on the original. WET OUT and ENV OUT. Wet out is fully wet. Use this in combination with the Envelope Input for unique sounds, or just use it to add to your mix.

The ENV OUT allows you to take the Wow's envelope follower control output and patch it into your filter CV or VCO CV…..create interesting feedback loops where the Wow is responding to the very amplitude and pitch that it is effecting!

There is also a new ENV LED, so now when you dial in the threshold control, you can see exactly when and how intensely the WARP function is going to garble your sound.

So in closing, the new Wow and Flutter module has a bunch of new features, keeps all the old ones, and in the process ends up as a very powerful modulation tool. We have put up some videos to let you hear the Wow processing drums and synths. With just a few knob turns you can really change the entire character of your input.If you have been searching for a delay with the character of a tape delay twisted and melted, look no further.

Controls

GAIN: Input gain
TRHLD: Threshold level of the envelope follower
D/W: Dry/Wet Ratio
DELAY: Delay Time
FDBCK: Feedback Level
WARP: Warp Level, turn it up and unleash the warbles!
ATTCK: Attack time of the envelope follower
DECAY: Decay time of the envelope follower
DEPTH: Depth of Delay CV
FBK: Switch between calm and chaotic feedback modes
Ins & Outs

ENV: Envelope follower input
DLY: Delay CV input
DCY: Decay CV input
IN: Audio input
OUT: Audio output (Dry/wet mix)
WET: Wet Audio output
ENV O: Envelope follower output
Features

Voltage Controlled Delay
Plenty of headroom for very hot modular signals
Warp function that takes your delays from tame to pitchy warbly insanity
Envelope follower: Attached to the Warp function. Can also be used independently!
Threshold LED Indicator: Indicates when the threshold has been reached
Skiffable"

Make Noise MMG Eurorack Modular Synthesizer Filter Module Low Pass Gate 12hp

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"A vactrol based Voltage Controlled Filter and Low Pass Gate using our QMMG core. The MMG bridges the Far East and West Coast synthesis styles by allowing for highly resonant acidic squelch and organic, percussive animations to be programmed simultaneously with a single module.

Input with attenuator, drive and compressing Overload Circuit with LED indicator

DC input for combining control and/ or audio signals

MODE allows for smooth Voltage Controlled sweep between Low Pass and High Pass responses with LED indication

FREQUENCY control with bi-polar CV attenuator and additional unity CV input

Voltage Controlled Q yields everything from smooth to aggressively clamped resonances

Automatic Gain Control keeps signal levels under control at High Resonance settings

ACCENT input for X0X style punch

STRIKE input for LPG style bongo plonks

Pairs well with the ECHOPHON and Phonogene"

Black Atomosynth Krakken Analog Synthesizer Compact Keyboard

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Krakken version 1.2
Compact analog synthesizer keyboard, midi controllable.

Let's play a solo!!!
The AtomoSynth Krakken is a super compact 100% analog synthesizer, carefully hand made with all discrete components as in the old vintage synthesizers which gives you a big and powerful sound with lots of character.
You can play it directly with the built in 2 octave keyboard and octave up and down shift buttons, it is perfect if you like a compact set up of small analog boxes!!!
Connect it by MIDI to a keyboard, sequencer or to your DAW and use it as an analog sound module and add that "punch" or "physicalness" of analog sound to your proyects.
Also you can control other analog gear with the built in 12 bit MIDI to CV converter.
Create weird electronic sounds, brilliant leads, acid bass lines or make noise and change the sound in real time by tweaking the knobs on stage or in studio.
Now built like a tank!!! in a rugged black metal case with all switchers and potentiometers fixed to the case.
Specifications

Keyboard: 25-key (tactile button keys).
Octave Shift up/down buttons (5 octave range).
VCO1 and VCO2: This synth features two analog square and saw waveform VCO (voltage controled oscillator)
Glide: effect control with a wide range that allows radical effects.
White noise generator.
LFO: One square and triangle waveform LFO (low frequency oscillator), that modulates the VCO for the vibrato effect creating old school arcade Atari-like sounds. Also it modulates the VCF (voltage controled filter) creating a tremolo effect. It has a led that shows the LFO rate.
VCF: One High pass and Low pass VCF (voltage controlled filter) with cut off and ressonance controls that can be modulated by the LFO and the VCO depth, It also features a dedicated envelope generator with decay and depth control.
EG: envelope generator with attack and release control. MIDI to CV converter.

The Krakken features an accurate 12bits MIDI to control voltage converter with a range of 5 octaves, it can be set to any midi channel from 1 to 16 so you can control any external analog synthesizer with the CV and Gate Outputs (1Volt/octave).
Also you can connect many Krakken synthesizers in chain with its midi thru output to a computer or midi sequencer and each one will play a different midi channel.
The instrument is is housed in a clear, laser cut, acrilic case that shows the analog circuitry.
It is powered by an external power supply 12V AC 500mA. (included)
Dimensions: 283mm(W), 272 mm(D), 82mm(H. incuded rubber feet and knobs)"

CLICK FOR MORE »