MATRIXSYNTH


Wednesday, March 19, 2008

The Bravery at Spaceland

You can find a link to the review on Amateur Chemist.

The A La Mode - 2 Kaoss Pad DJ Jam


YouTube via DevoteRecords
"An extract of The A La Mode jamming on 2 Kaoss Pad 3's.
http://www.devoterecords.com/thealamode
http://www.myspace.com/alamodesounds
http://www.cdbaby.com/thealamode
http://www.devoterecords.com"

Novation Supernova 2


YouTube via soniksaw
"Short video of a supernova 2 playing 6 parts at once in performance mode with 2 modulated parts."

MOOG BUTTON BADGE 25MM

via this auction.

Also see this one.

ELSITA 4ch Analog DRUM Module

images via this auction
"ELSITA Rmif is 4-channel analogue drum synthesizer.
• This auction drum synth was made in September 1988 in USSR.
• Synthesis System - Analogue subtractive.
• Built-in metronome, what you can assign to one or two osc.
• Oscillators: VCO x 2 + Noise x 2, Oscillators Waves: sawtooth, square.
• Controls on rear panel for each channel: Gain, Tone, Attack, Release, Filter. There is also switch and balance between noise & tone generators and master level.
• Connectors on on the rear panel - 4 trigger inputs, sequencer input, main and phones output MONO.
• Weight: 5 kg - Power Supply: 220/240 V.
• No MIDI. You can trigger it from any audio output - synthesizer, drum machine or virtual instrument from analog output of Your soundcard."

KORG MS10

images via this auction

"Korg MS10 and original leather carry case."

Note on Auctions

Just a heads up, I am now including UK auctions. Definitely some interesting items coming up.
This also applies to MATRIXSYNTH-B as well, so be sure to check it out.

CV-13

images via this auction
There are some videos with descriptions at the auction.

"Combines Features of the Roland BC-13 with Control Voltage Conversion for ALL Vintage GR Controls. Works with Roland G-202, 303, 505, 707, 808, Ibanez IMG2010 and Roland GI-10, GI-20, GR-1, GR-9, GR-30, GR-33, VG-88, VG-99 and More!

Features of the CV-13:
* Converts Vintage Roland 24-pin GR Signals to Modern 13-pin Signals
* Four top panel foot switch controls for Synthesizer Volume, Filter, Resonance and Guitar Mute
* Up to FIVE simultaneous control voltage outputs in Roland EV-5 standard
* Six internal precision Phifer cermet trimmers to adjust response range
* Rear panel EV-5 volume pedal input for direct guitar signal
* Bi-directional support for Ibanez IMG2010 virtual whammy bar
* "Pin-9 to Ground" switch to reduce grounding issues with Roland synthesizers
* Powered by 13-Pin Guitar Cable! No External Power Supply or Batteries Required
* Solid oiled walnut sides on a black, ventilated steel base with contempra grey (beige) aluminum top panel, 280 mm x 220 mm x 100 mm.
* Backed by One-Year Parts and Labor Warranty
* Elegant Design

The onboard controllers that made the early Roland synths so much fun to play disappeared when Roland switched from the 24-pin design to 13-pin design. While Roland has continued to dramatically advance their guitar synthesizer design, modern 13-pin systems are still limited compared to their 24-pin predecessors. Realizing that guitar players wanted more control options, Roland added both a D Beam controller and Ribbon Controller to the new VG-99. These options are great, but they are not as convenient as the vintage 24-pin onboard controllers. And the D Beam and Ribbon controllers require the guitar player to be relatively near the VG-99.

The new CV-13 completely bridges the gap between a vintage 24-pin guitar controller and the VG-99/FC-300 combination. How? The VG-99 has an EV-5 control pedal input on the back, plus there are three EV-5 inputs on the FC-300, making a total of four continuous control inputs to the VG-99/FC-300 combination. With a Roland G-303 and the CV-13, for example, and you can use the filter, resonance, vibrato, and balance controls on the guitar to operate the VG-99. The virtual GR-300 in the VG-99 can now work exactly like a real GR-300, with the player adjusting GR-300 parameters from the guitar!

But this is just the beginning! The CV-13 also supports the virtual whammy bar found on the super-cool Ibanez IMG2010. And the CV-13 provides two whammy bar outputs, one control signal for moving the bar up, and one for moving the bar down! While recreating a virtual GR-300 was the initial inspiration for the CV-13, so much more is possible! The VG-99 has over 4000 target parameters, and any of these can be assigned any controller on a vintage 24-pin guitar. Or the guitar controllers can be assigned to continuous MIDI controllers, for manipulating soft synths in real time!

This setup requires several TRS cables from the CV-13 to the VG-99/FC-300 EV-5 inputs. For this reason, the CV-13 package also includes one 12’ TRS cable and three 3’ TRS cables. These are brand new, high-quality cables from Orange Country Speaker, specially modified for the VG-99/FC-300."

Auction videos minus the descriptions here. Also check out the BX-13 here, and the DC-13 here.

MOOG Little Phatty

images via this auction.

Note the auction says it's the Stage Edition, but the images are of the Tribute.

Korg Univox

images via this auction

"Yes, the lights blink at random."
The seller does not know what the mod does. If anyone out there does, feel free to comment. audio here
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH