Mattson Mini Modular for the DIY crowd. You can find full details here.snip:
"Assembled, tested circuit boards are now available for those customers who have the desire to create their own panels, graphics, layout and use that collection of parts that have been accumulating in a drawer for years.
All available modules have both 6-pin 0.100" MTA and 4-pin 0.156" MTA power connectors mounted on-board. Most modules will perform equally well using +/- 15VDC or +/- 12VDC power supplies. The modules that are affected by the lower power supply will be noted. For those, the shopping cart will ask you to select the power scheme that will be used.
All components used in the module boards are certified RoHS compliant according to the EU directives.
The module circuit boards with the green solder mask and silkscreen are manufactured RoHS compliant. The non-solder mask boards are short run boards and are not RoHS compliant."
The first set of boards available:
# Voltage Controlled Filter Board
# Voltage Controlled Amplifier Board
# Dual Low Frequency Oscillator Board
# Sample and Hold Board
# Envelope Generator Board
# Glide Board
# Noise Board
# 4x 1x2 Buffer Board
# 4x Mixer Board
# Amplitude Follower Board
# 4x Gate Delay Board
# Utility 1 Board
# Voltage Controlled Mixer Board
Where is the vco? :(
ReplyDeleteThe dence populated board shown bottom right in the pic is not on offer in the list!
ReplyDeletevia George Mattson: "The VCO will is a slightly oversized PCB with wiring conventions that don't follow the trend of the rest of the modules.
ReplyDeletePlus, tuning and calibration is a PITA and I need to figure out how to generate a simple, easy to understand method of accomplishing that for the DIY guys.
So, the VCO and MIDI will come along later after I've had an opportunity to figure out how to present them elegantly to the DIY customers"