Make Noise will be at the Analogue Haven Booth 1859 Hall E. You can find a list of all synth related booths here. If you are not on the list, let me know.Details via Make Noise:
"Pressure Points is a controller in which 1 of 4 sets of 3 tuned voltages are selected by touching the corresponding printed copper wire at the bottom of the instrument. Touching Pressure Points, you become part of the circuit. In addition to the tuned voltages, a gate signal (Gate OUT) and a control voltage proportional to the amount of pressure applied (Press OUT), are generated when the module is touched. Up to 4 of these modules may be Chained together to create controllers of varying size and complexity. Each of the Gate and Press OUTS are normalized to their respective SUM BUS which is output at the last Gate and Press OUT in the Chain.
2 potentiometers allow the circuit to be adjusted for desired playing response. One is an internal trimmer which may be adjusted to compensate for size of your digits, and moisture of your skin. The other is adjustable from the front-side of the module, and sets overall system sensitivity.
An expansion port on the backside will allow for sequential control via the forthcoming Points Expander, bringing all of the typical functionalities of the analog sequencer to this system.
The Pressure Points operates from a single supply and may thus be powered with a wall-wart or even a 9V battery. Pressure Points will, of course, operate perfectly powered from the dual supplies found in euro rack format cases from Doepfer, MonoRocket, MW. Having the single supply operation allows for greater ease in building of custom enclosures.
The faceplate for the Pressure Points is actualy a printed circuit board. Therefore it will be black, with white and gold graphics.
This module is 20HP and consumes 20mA worth of current."
Am I missing something or is this a rip off of the bugbrand CTL1?
ReplyDeletehttp://www.bugbrand.co.uk/index.php?main_page=product_info&cPath=2_6&products_id=48
:#
Now, now. Not a great idea to go biting the hand that feeds is it? We're lucky to live in a time where there are multiple manufacturers who listen to their customers and create what we ask for. I for one welcome a bit of friendly competition for my dollar (or quid as the case may be). Even subtle differences in design can mean a world of difference in workflow between one person and another.
ReplyDeleteJust MHO.
Touch plate controllers appeared long time ago on Buchla and Serge systems. And probably earlier, there's a touch plate module in my electronics educational kit so probably they were used long before Buchlas.
ReplyDeleteIt's great that Makenoise offers these in euro.
I seriously doubt Tom Bugs would have any issue with this. He's got more work than he can handle as it is.
ReplyDeleteooh, nice. You have no chance of tom bugs selling you one. Isnt he totally overloaded on orders as it is.
ReplyDelete(IMO BugBrand is seriously cool stuff BTW)
Go make noise. I will take 8 of em.