Reason CV to MIDI to Oberheim Xpander

YouTube Uploaded by PeffTV on May 28, 2011

"Reason MIDI Sequence routed as CV over Audio to an Oberheim Xpander.

This is kludgey. Here's the data patch:
1. Reason MIDI Sequence to a Thor
2. Thor Converts MIDI to Control Voltage Note and Gate signals.
3. CV Note/Gate are converted to Audio Signals and routed to Hardware interface audio outputs.
4. Audio Outputs are directed to Soundflower
5. CV as Audio routed through Soundflower into MaxMSP
6. MaxMSP converts CV as Audio to MIDI
7. MIDI directed to a hardware port on a Novation controller
8. MIDI cable to the Oberheim Xpander

Because this configuration does not use Rewire, Audio from the Xpander can be recorded back into Reason. There is, however, a considerable amount of latency."