via this auction
"BUY IT NOW IS FOR A EURO FORMAT PANEL KIT. IT IS TO CONVERT THE MFOS WAVE FREAKER [video here] INTO A EURO/DOEPFER COMPATIBLE MODULE. YOU NEED TO PURCHASE THE WAVE FREAKER PCB FROM MFOS
You need to build the Wave Freaker yourself and then use this kit to solder yourself a Euro Compatible Module.
I include the Black Panel, mounting bracket, washers, screws, and spacers. I have a picture of what is in the kit. EURO PANEL SCREWS ARE ALSO INCLUDED
There is (2) ways to mount the PCB using the Bracket. STYLE A: measures 5.25" from panel to back. STYLE B: gives you 1" space from panel but then takes up 4.75" going to the left.Look at the pictures I used both styles. I myself had to use STYLE B and placed the Module next to other fancy SMT modules that where skinnier then 1" on the back.
It is possible to give more clearance for STYLE B but you would have to buy the longer screws yourself.
First here is the BOM needed from Mouser to use on the Panel Circuit:(6) MOUSER# 16PJ138 (3.5MM JACKS)
(7) 100KB POTS MOUSER # 858-P160KN0QC15B100K
(1) 5mm T1 3/4 LED
(1) 1/4" SIZE LED HOLDER OR LENSE (HOLE SIZE IS 1/4")
(7) KNURLED KNOBS
(1) SPDT OR SPST SWITCH (HOLE IS 1/4") SO USE MINIATURE TOGGLE SWITCH
(1) SMT 10 PIN IDC HEADER. MOUSER PART# 649-95278-101B10LF
(2) PTC SMT RESETTABLE FUSES MOUSER #576-1812L050PR , THESE ARE OPTIONAL. IF YOU DECIDE NOT TO USE THEM YOU CAN SOLDER JUMPERS ACROSS THE SMT LOCATION.
(1)10 PIN TO 16 PIN IDC POWER CABLE. YOU CAN BUY ONE FROM EBAY OR BUILD ONE.
THE PANEL HAS TRACES ON IT TO MAKE IT EASIER FOR WIRING. YOU ONLY HAVE TO CONNECT (1) GROUND WIRE BECAUSE OF THE NICE TRACES I LAYED OUT FOR YOU. SO ALL YOU HAVE TO DO IS CONNECT ALL THE X1-X21 WIRES TO THERE LOCATIONS. I PLACED SMT PADS TO MAKE IT EASY. THE POTS LEGS GET BENT FORWARD TOWARD THE PANEL AND THEN GET SOLDERED ONTO THE PADS FOR A NICE STABLE MOUNT.
THE POWER CABLE ALSO GET SOLDERED ONTO THE BACK OF THE PANEL ON PADS. SO IN OTHER WORDS YOU CONVERT THE MFOS WIRES INTO EURO/DOEPFER 10 PIN POWER HEADER."
No comments:
Post a Comment
To reduce spam, comments for posts older than one week are not displayed until approved, usually same day. Do not insult people. For items for sale, do not ask if it is still available. Check the auction link and search for the item. Auctions are from various sellers and expire over time. Posts remain for the pics and historical purposes. This site is meant to be a daily snapshot of some of what was out there in the world of synths.