via this auction
"This a working XSFX RedSound Effects unit. Barely used, no known issues. It calculates the BPM from audio in and then allows you to add one or more effects sync-ed to the beat or beat increments. The specs below tell the story. RedSound, now out of buiness, only made a few of these. It is used but in great working order, only minor wear from use. The included power supply is not original but heavy duty (4.5amp 16 VDC). No user guide , but this unit is easy to figure out. Sold as is, no return. I only warrant that it will not arrive DOA. No Int'l bidders please, I post feedback and expect to be paid in reasonable amount of time.
FEATURES
AUDIO
FREQUENCY RESPONSE: 20Hz to 20kHz (+/-0.5dB)
S/N RATIO: 85dBTHD: 0.015%
INPUT LEVELS: Phono - 55dBV / 47k ohms
Line -14dBV / 22k ohms
Mic - 55dBV / 3 k ohms
OUTPUT LEVELS: Balanced 4 dBm [1.20V] / 600 ohms
Unbalanced 0dBV [1V] / 1 k ohm
BPM ENGINE
RANGES: Low (60 -120BPM), Mid (90 -180BPM), Hi (115 - 230BPM)
LOCK-IN TIME: Typically 1 - 4 sec's (from introduction of readable beat information)
DISPLAY ACCURACY: 0.1 BPMINTERNAL ACCURACY: 3-millisecond sample rate
EFFECTS
FILTER
TYPE: Virtual analog modelled 12dB per octave, Low pass
FX MIXER JOYSTICK: Frequency [X], Resonance [Y]
Z PLANE FADER: Envelope Mod [press & hold FILTER button sets LFO shape]
LFO SHAPES: Triangle, rising, falling, pulse
DELAY
TYPE: Modelled vintage tape delay
FX MIXER JOYSTICK: Reproduction [X], Repeats [Y]
Z PLANE FADER: Level
SPS PANNER
TYPE: Multi pan of low, mid & high frequencies
FX MIXER JOYSTICK: Direction [X], SPS [Y]
Z PLANE FADER: 2-Way Split
CUTTER
TYPE: Variable Ramp Gate
FX MIXER JOYSTICK: Attack [X], Decay [Y]
Z PLANE FADER: Gate Duration
FLANGER
TYPE: Modelled Tape Flanging
FX MIXER JOYSTICK: Frequency [X], Feedback [Y]
Z PLANE FADER: Depth [press & hold FLANGER button sets LFO shape]
LFO SHAPES: Triangle, Rising, Falling, Pulse
OTHER CONTROLS
MASTER ON/OFF: Activates selected effects
MIX FADER: Sets the wet/dry output balance
HOLD [JOYSTICK]: Memorises FX setting as set by joystick in any off-centre positions
FREQUENCY SELECTORS: Low, Mid, High switches select frequency bands for FX processing
FX MODE BUTTONS: Select the main operating mode - single or multi
INPUT SELECTOR: Mic/Line/Phono switch
INPUT LEVEL [CLIP]: Input gain control with bi-colour level indicator
MONITOR LEVEL: Headphone level control
MIC TRIM: Microphone level control
TRIGGER/SPEED [SINGLE MODE]
SETTINGS: Beats [buttons/LEDs] 1/4 -1/3 - 1/2 - 2/3 - 3/4 - 1/1 - 2/1
Bars [rotary encoder/display] 1 - 2 - 3 - 4 - 6 - 8 - 12 - 16
MULTI FX PRESETS [MULTI MODE] 50 x factory presets featuring multiple effect combinations
NUDGE 4 x button keypad for BPM / Synchronisation adjustments
INPUT CONNECTIONS
MIC: 1 x ¡¦Jack socket [front panel]
LINE: 2 x ¡¦Jack socket [rear panel]
PHONO: RCA phono sockets [rear panel] + earthing terminal
OUTPUT CONNECTIONS
BALANCED: 2 x ¡¦Jack socket [rear panel]
UNBALANCED: 2 x RCA phono socket [rear panel]
MONITOR: 1 x ¡¦Jack socket [front panel]
POWER SUPPLY External (16VDC 750mA)
DIMENSIONS/WEIGHT 202[H] x174[W] x30mm[D] 1.25kg"
No comments:
Post a Comment
To reduce spam, comments for posts older than one week are not displayed until approved, usually same day. Do not insult people. For items for sale, do not ask if it is still available. Check the auction link and search for the item. Auctions are from various sellers and expire over time. Posts remain for the pics and historical purposes. This site is meant to be a daily snapshot of some of what was out there in the world of synths.