Published on Apr 24, 2013 Paulo Beto·155 videos
via vBrazil translated to Googlish (note there is a eurorack version):"Description:
The first button, RUN / STOP, or starts to scan the sequences.
Most issues occur in operation or stop the scan, including SAVE and LOAD.
The VALUE knob is unique to the selection of notes, which allows speed and simplicity in issues, especially in real time.
In the bottom block of buttons, red LED's indicate the position of the scan and green LEDs indicate the step / selected memory.
The LAST STEP button determines the size of the sequence. Say the desired size of 12 steps. Presses the button 12 and then the LAST STEP. Done. The sequencer will sweep the Step1 to Step12.
The button TRIGGER ON / OFF enables / disables the output of a trigger pulse in step selected. Works like the LAST STEP, you select the step, presses TRIGGER ON / OFF and the trigger is disabled for that step. If it is already disabled reabilitado.Os LED's on the TRIGGER button indicates its status (red LED, triggers the sequence A and sequence B Green LED).
The fourth button, SEQ A / B, selects and indicates the sequence editing.
The fifth button, CLOCK INT / EXT, selects and displays the clock source. Red LED = internal clock and external clock = green LED.
SAVE & LOAD buttons:
Regarding memory operations, only the buttons 1 to 8 act.
To save a sequence in the third memory just press button 3 and button SAVE.
To load the sequence 5, pressing the button 5, then the LOAD button. Done.
The FREQ pot controls the frequency of the internal clock.
In the stand alone version, the supply is made by an external 9VDC, connection type Boss (Central Terminal = GND), not supplied.
Eurorack version: Width = 45hp (228mm)"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).