Sequencer Phasing with MetaModule

Note: Auction links are affiliate links for which the site may be compensated.
video upload by 4ms Company

Patch notes via the 4ms forum: https://forum.4ms.info/t/sequencer-ph...:

External Audio Path:
-Main audio outputs on channels 1 and 2

Internal Audio Path:
-The output of 2 modal synthesizers are fed into the Pressed Duck
-A kick, rimshot, and clave module are fed into the Pressed Duck
-The Pressed Duck’s main outputs are fed to channels 1 and 2 on MetaModule

Internal CV Path:
-A Count is used as a master clock source
-The main output of Count clocks two step sequencers
-The reset output of Count resets both step sequencers
-All 3 outputs from the SEQ 3’s are fed into a dedicated sequential switch.
-The switches step through on the 1st downbeat of each sequence, going to the next
sequence at the start of each bar.
-The output of the sequences are attenuated and then quantized,
-After quantization the sequences are then sent to an octave module for final pitch value.

Metamodule Knob Mapping:
A - Kick volume
B - Rimshot volume
C - Clave volume
D - Bass volume (modal synthesizer #1)
E - Lead volume (modal synthesizer #2)
F - Reverb Amount
U - Compression amount
V - Feedback amount
X - Master volume