Friday, November 20, 2026
New +EF Firmware for Memorymoog Plus, a Little Demo
video upload by Eric Frampton
"This is a short demo of some new firmware I've written for the Memorymoog Plus synthesizer.
Available December 1, 2026
www.ericframpton.com/memorymoog
All drums are from Superior Drummer.
All other sounds are from a Memorymoog Plus running +EF firmware.
Anyone familiar with the Memorymoog and its notoriously bad timing should know that all of the tracks in this video were played via MIDI, with only MIDI quantization and no additional audio timing cleanup used. I didn't slide any tracks around, either!"
Additional details via Eric Frampton:
I’ve been struggling with, and cursing at, the timing in the Memorymoog for almost 40 years. There was always the LAMM upgrade, but I never had the cash to have it done. However, now that we have modern tools to do something about it, with the help of Uncle Claude, we've spent the last 6+ months researching, testing, measuring, and ultimately re-writing the Memorymoog Plus firmware from scratch, adding a bunch of the features and optimizations I always wanted along the way.
Note that, unlike LAMM, this requires no modifications to the machine unless you want MIDI pitch bend reception and CC4 to footpedal, in which case you have to install the dBm mods.
Some of these items you’ll recognize from dBm, some from LAMM, and some are things nobody else has ever offered for this synth.
MIDI:
- Note on/note off, MIDI notes 36-99 (no velocity)
- Program change (0-99)
- Channel selection (1-16 or OMNI)
- Pitch bend (requires dBm mods, see below)
- CC1 to Modulation Amount (adds to the panel knob and local mod wheel)
- CC2 (Breath Controller) as aftertouch
- CC4 to Foot Pedal 1 and 2 (requires dBm mods, see below)
- CC7 to Programmable Volume
- CC40 to Voice Modulation OSC 3 Amount
- CC64 (Sustain) to stretch the envelope Release times, as the RELEASE footswitch does (see below)
- Channel Aftertouch to a selectable destination (see list below)
- System Exclusive send/receive (all patches or one patch, including new aftertouch settings)
- MIDI Clock to arpeggiator sync (1/4, 1/8, 1/16, 1/8T, 1/16T divisions), with Start/Stop/Continue
- CC120/121/123 to All sound off/Reset controllers/All notes off
- Tune Request to Autotune
- Running status supported
- MIDI receive activity indicator
--
AFTERTOUCH DESTINATIONS (with variable scaling amount) available one at a time, saved per-patch:
- Off, Pitch Bend, Osc 2 Freq, Osc 3 Freq, Noise Level, Modulation Amount (LFO), Modulation Rate, Filter Cutoff, Filter Emphasis, VCA loudness (implemented as VCA Sustain level)
--
MORE COOL STUFF:
- All-new firmware throughout
- Note-on timing improvements over MIDI and local (single note dBm over MIDI: 17.5 ms avg., ours: 7.2 ms avg.), and much steadier
- Arpeggiator can now track full range of LFO clock or trigger input (no dropped steps at 80 steps a second, the fastest we tested)
- Arpeggiator "loping" is gone and timing slop is greatly reduced (each step fires at avg. 6.6 ms after its clock, with at most 0.7 ms of jitter)
- Arpeggiator now respects poly voice allocation
- Arpeggiator resets the current chord when playing a new one in Latched mode (now you can use HOLD to pile on notes instead)
- Arpeggiator now plays voices stacked together in MONO mode (doesn't revert back to single voice anymore)
- HOLD keeps its chord through MONO and program changes, captures up to 24 notes, and with the arpeggiator correctly walks the captured chord, transposed from the key you play
- HOLD no longer loses its latch when a key is lifted while building a chord
- More graceful handling of MONO/POLY/HOLD/Arpeggiator state when changing programs
- Multiple LFO waveforms at once (not mutually-exclusive anymore)
- PROGRAMMABLE VOLUME is switchable to panel always active (ignores the saved value)
- Pot-edit display now reads 0-255 instead of 0-100
- Audition MONO mode priority and voices, POLY mode voice allocation, and Arpeggiator mode changes in real-time
- Voice gate activity display
- D key or MIDI CC120 forces All Notes Off and Arpeggiator latch off (HOLD's chord stays memorized)
- RELEASE footswitch now toggles between programmed Release time and maximum length, closer to how a piano sustain pedal would act. The RELEASE front panel button now separately toggles the Release stage on or off entirely (as stock)
- Footswitch jacks are now auto-sensing on boot (use either normally open or normally closed pedals)
- Re-designed C-4 Voice Disable service page
- Re-designed Autotune report page (now lists any bad voices individually)
- Boots to the program you last loaded
--
NOTES:
- Cassette LOAD is kept, so old tapes still load. Cassette SAVE and VERIFY were removed to make room; back up with SysEx instead
- The security routine, sequencer, and program chains have been removed, and MIDI OUT functionality has been removed except for SysEx transmission
--
REQUIREMENTS:
- MM Plus in proper working order. This will not work with a non-Plus MM, or with any third-party MIDI interface. If you're having technical issues with your unit already, this update will not fix them. This includes...
- Healthy RAM chips. We recommend that your technician checks them with our diagnostic ROM before installing. Tired/faulty RAM will show up as failed SysEx bank loads.
- Removal and installation of 4 EPROMs.
- IF YOU WANT PITCH BEND and FOOT PEDAL control over MIDI, installation of the hardware modifications as described in the dBm Technical Services update. The docs that detail these mods are available online. If you're not comfortable ripping apart your instrument, you'll have to find a technician who is. The minimal, commonly available parts to do this are not included in the package, so you or your tech will have to source them yourself.
I plan to make it available December 1, delivered via custom-burned EPROMs. This will be a paid upgrade.
Check out www.ericframpton.com/memorymoog for more info.
See dealers on the right for pricing and availability on gear.
PLEASE SUPPORT MATRIXSYNTH.
LABELS/MORE: Eric Frampton, MOOG, New Updates, News
PLEASE SUPPORT MATRIXSYNTH.
LABELS/MORE: Eric Frampton, MOOG, New Updates, News
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
Subscribe to:
Post Comments (Atom)



























No comments:
Post a Comment
Note: To reduce spam, comments for posts older than 7 days are not displayed until approved (usually same day).