Tiptop Audio 230t & a Simmons Pad - First Patch [No Talk]

video upload by Stazma

"More infos and affiliate links in the description // Support on Patreon to get samples from this session: / stazma

This was the very first patch I did when I got the 230t from Tiptop. I wanted to check if I could use my Simmons drum pads with it. I also wanted to know how it would behave as an envelope generator using pulses from the 200t system itself so I used the 245t to trigger it and act on a droning 259t.

Then I just played around and that's the result."

Also see New Tiptop Audio & Buchla 230t Tips and Tricks by Todd Barton aka vgermuse.

New Tiptop Audio & Buchla 230t Tips and Tricks

video upload by Todd Barton

"Just a few ideas for patches with the Tiptop Buchla 230t Triple Envelope Follower. Also, checkout Stazma's video on the 230t:"

[The new Tiptop Audio & Buchla 230t announced in May is now out. Check with dealers on the right for availability.]

Tiptop Audio & Buchla 230t Demo

video upload by Stazma

"Today we are going to check out the new module from the Tiptop & Buchla 200t serie: the Triple Envelope Follower Model 230t.

It's a fantastic addition to the 200t echosystem, that will let you control dynamic or timing with external audio such as, microphone, samples, drum pads, electric instruments, field recording or anything in that spirit. It can also be used as an decay envelope in the system or in compression / expansion patches."

TipTop Buchla 230t – Triple Envelope Follower // Interact with your patches!

video upload by Dexba

"The Buchla 230 is here, and while it might not be the shiniest module (I know you're lusting after the tenth granular effect or the twelfth tape-inspired contraption), it's quite a useful and FUN one!
Not only does it stop the modular from being this separated entity, and it gives it back the ability to listen and interact with the real world, but analysing the internal signals can be a productive endeavour too.
In this video, I'll show you some cool patches, and I will introduce the concept of sidechain in the Buchla system, which in this case was used in the most common way we associate with the term, but it can also be a powerful tool to swell reverbs, make multiple voices arise in a sea of notes, and, in general, make more lively patches :)"

Check with dealers on the right for availability.

Additional 230t posts

New OCTOLFO, Multipass, & Resonator Eurorack Modules From Tiptop Audio

Also see Buchla & Tiptop Audio 248t and 230t Incoming for new details. As always, check with dealers on the right for availability.

Details on the OCTOLFO, Multipass, & Resonator follow.

OCTOLFO – Eight-Voice Voltage-Controlled LFOs

For all Eurorack users, here comes your mega LFO. And for those of you who have already joined us on our journey into polyphonic patching heaven, this is the one you've been waiting for. The Octolfo consists of eight fully independent LFOs with plenty of controls, lots of waveforms, and the ability to load your own waveshapes. Clock-sync it or let it free-run. Use one-shot cycles of waveforms to create unique envelopes, and reset LFO cycles from your notes. All eight LFOs are available simultaneously on regular jacks and Polytip jacks—both outputs and CV control inputs. CV is mappable to parameters, and the entire setup can be saved as a “preset.” This module brings polyphonic modulation into our new world of polyphonic patching.

Multipass – Eight-Voice Multimode Filter

Please welcome the second filter in our polyphonic series: the Multipass. This one carefully recreates the rare OB-X filter design (not the later CEM-based OB-Xa), delivering the sound of the ’80s and early techno.

It features extended signal levels on inputs and outputs for an even broader tone range. LP, BP, and HP modes are poly-voltage controlled and simultaneously available per voice through Polytip, and via a mixed output jack. Each filter mode has manual gain control via dedicated faders. Frequency control is polyphonic and can be over-modulated by a mono signal with adjustable scaling. With all its poly mod inputs, this filter goes far beyond its classic roots.

Where and how much?

The first batch is ready, and we expect to begin shipping to shops soon. Price will be in the $500–$600 range.

Resonator

An extended design based on the analog resonator from the 1975 Polymoog synthesizer. This classic beauty works with everything from drums to polyphonic audio, adding lush resonating swirls.

There are three resonators, each with a selectable band. Each has voltage control for every parameter, nine CV inputs in total. Multiple gain stages (master input, resonator gain, and mix output) allow fine control and help manage clipping. Emphasis CV range boundaries prevent runaway self-oscillation. A true-bypass switch makes it easy to compare processed and dry signals—perfect for leaving it patched in and engaging only when needed.

Where and how much?

The first batch is ready, and we expect to start shipping soon. Price will be about $245.

Buchla & Tiptop Audio 248t and 230t Incoming

via Tiptop Audio

Multiple Arbitrary Function Generator Model 248t

Status: TBA
Price: TBA

Update:

248 Boommm!

Yes yes, the MARF is here and alive! At Superbooth, we’re showing the first prototype, and it’s already 80% functional. What a monster. The range of possibilities here is truly outstanding. This thing can literally mutate based on how it’s programmed. It’s wild and often unpredictable. Is it a sequencer? A curve generator? For notes or modulation?

Well, it’s a function generator, an arbitrary one at that, and in practice, it’s more complex than we could’ve imagined.

We were unsure about this module. There’s no fully functional original unit we could test, and all the data comes from Don’s 22-page user manual from 1977, along with insights from Kyle Swisher and Todd Barton, who’ve been investigating this for years. Exciting times!

Where and how much?

Wish us luck—we hope to release it this winter. Pricing is expected to be in the $650–$950 range. As always, we’ll do our best to keep it affordable and give you plenty of time to save up.

Triple Envelope Follower Model 230t

Status: TBA
Price: TBA

Update:

Triple Envelope Follower Model 230t

Here’s another wonderful vintage design: three AC amplitude followers with excellent sensitivity and highly accurate CV reproduction of the incoming signal. Both sensitivity and decay time are adjustable across a wide range. The circuit is so sensitive, it can even produce output from the noise generated by rotating the sensitivity knob—pretty cool.

The pulse output can generate either a transient (trigger) or a sustained gate signal, depending on the switch setting. We’ve been using it extensively in our systems and discovering tons of creative patch ideas. Where and how much?

It’s heading into production, with the first batch expected in July 2025. Pricing will be in the $200+ range.