Redshift 6 – MPE Demo

video upload by Supercritical Synthesizers

"Hear the Redshift 6’s MPE capabilities in this demo recorded at Bristronica 2025 — no talking, just pure playing.

00:00 Demo 1
02:40 Demo 2
06:24 Demo 3

The Redshift 6 is a six-voice analog polysynth, but with 16 oscillators per voice, it goes far beyond the capabilities of a traditional six-voice instrument.Each voice can also be played paraphonically, significantly extending the overall polyphony.

External FX used in this demo: Valhalla VintageVerb.

You can find more information about the Redshift 6 synthesizer on our website: https://supercriticalsynthesizers.com"

New Redshift 6 - Firmware 1.4 Update

video upload by Supercritical Synthesizers

"Hear our new presets for Redshift 6 – no talking, just pure playing. These presets showcase a wide variety of sounds, from classic analog poly-synth layer splits to lush single-layer textures and inspiring one-key wonders.

All sounds and rhythms come directly from the Redshift 6, built using its arpeggiator and LFOs.

00:00 - CLUB HELSINKI
01:18 - STRING QUARTET
02:40 - SYNTH CAST NEWS
03:50 - SOLITUDE
04:54 - ZERO SUM
05:50 - CLUB TAMPERE
06:56 - SYNCED SAW PAD
07:42 - DRIVE LFO PLUCK
08:24 - PACIFIC RAINDROP
09:30 - AMBIENT SKIES
10:09 - CLUB SEINAJOKI
11:04 - CLUB TURKU
12:31 - BEYOND SUNSET

The Redshift 6 is a 6-voice analog polysynth, but with 16 oscillators per voice it goes far beyond the capabilities of a traditional 6-voice instrument. Each voice can also be played paraphonically, significantly extending the overall polyphony. In addition, each of the 6 parts has its own dedicated arpeggiator.

External FX used in this demo: SRE330, Meris Mercury 7, Meris Polymoon, Eventide H9.

The Firmware 1.4 update brings MPE, an arpeggiator, Part Copy/Paste, and more.

You can find the firmware 1.4 and more info about the Redshift 6 synthesizer on our website: https://supercriticalsynthesizers.com"
REDSHIFT 6 FIRMWARE VERSION 1.4

ADDED
• MPE
• Arpeggiator
• Multi-part editing for multitimbral patches
• New oscillator waveform variants that reset on incoming note
• Envelopes now have a Reset parameter
• LFOs now have a Sample & Hold waveform

IMPROVEMENTS
• LFO range is now 0.01-1000Hz, up from 0.1-100Hz
• 18 new factory presets

FIXED
• Fixed all known bugs

MACHINA BRISTRONICA w/ Stromkult

video uploads by Stromkult

Playlist:

1. MPE on Supercritical Synthesizer Redshift 6 - Bristonica 25

Now capable of MPE!

The latest Redshift update introduces MPE functionality.
This feature, which addresses frequent customer requests, enables compatibility with MPE-capable controllers, such as the LinnStrument.

2. Verbos Electronics Multistage 16- Bristronica 25

New evolution of the Voltage Multistage, one of the first Verbos Modules.
The original Voltage Multistage has an analog sequencer core with several unique features that allow it to function as a sequencer with switchable slides on each step, multistage envelope of any length with sustain on any stage, any shape of LFO, voltage quantizer, and more.

The Voltage Multistage 16 is no longer based on a CMOS counter core, but is built around discrete transistor stages, which enables gate inputs on each stage. This allows external gates to jump it to any stage, multiple loops and sequences that start at one stage and then enter into a loop later.

3. Ohm Force Bohm - Bristronica 25

Explore uncharted kick territory. Choose from nine unique models (and counting) and let the randomizer surprise your creativity. Precision sound-shaping knobs with wide sweet spots make flawless tweaks effortless.

4. TouellSkouarn - Bristronica 25

Gael is revealing the modules that are currently housed in his suitcase. Including the Strakal Brulu and the one and only Germanium Mixer. If you check the prices of old Germanium mixers, such as the Siemens, you will see that this one is a real bargain. As always, there is a lovely sound at his booth; no sine is allowed to pass through this Eurorack system.

TouellSkouarn: Squaring your sines since 2010

5. Crosspatch Triggerpad Updates - Launchpad Sequencer - Bristronica 25

Mitja tells us the latest news about his module at this year's Machina Bristonica. The Triggerpad module converts your Launchpad into a standalone Eurorack. This allows you to repurpose an older Launchpad that might be gathering dust for your Eurorack system. The workflow is super simple and hands-on. You have features such as polymeter per track, swing and micro steps at your fingertips. The new features are BPM modulation and triplets.

6. UDO Audio DMNO 8-voice 2-part multitimbral - Bristonica 25

We have just had the opportunity to take a first look at the new, innovative synth from UDO Audio: the DMNO.
Here's a short interview and sound demo from George!

Features:
8 voice polyphonic, with 4 ‘super’ voices when in Binaural mode. Binaural mode gives each channel (ear) a full synthesizer voice with independent detuning and modulation, creating an expansive, rich and texturally wide sound 2-Part Multitimbral, comprising 2 independent hybrid synthesizers, each with its own dedicated set of front-panel controls
8 selectable ‘Play Modes’ that immediately reconfigure DMNO’s signal flow, redefining how its two independent synth engines interact with one another

7. Teaching Machines FuzzBillon: Numerical Tone Switching – Bristronica 25

Instead of using potentiometers for the device's settings, Teaching Machines uses numerical switches. This offers the advantage of total recall. The effects range from subtle overdrive to screaming distortion and are based on a completely analogue circuit with amplification devices from Germanium to Silicon and light-emitting diodes. Shipping soon!

0:00 Intro / Explanation 3:34 Sound Demo

Redshift 6 - Rave Breakbeat

video upload by Supercritical Synthesizers

"Early 90's rave/breakbeat vibes with Redshift 6.
This demo consists of four multitimbral parts, all recorded live from their individual outputs:
Part 1: Bass line (Character: Mean)
Part 2: Detuned saw lead (Character: Mean)
Part 3: Distorted acid lead (Character: Sour)
Part 4: Square lead (Character: Sour)

The acid lead has an external delay; all other synth parts are dry.Drums were added in the DAW."

Redshift 6 - Progressive Trance

video upload by Supercritical Synthesizers

"In this Progressive Trance demo, the Redshift 6 is playing five live parts multitimbrally:

Part 1: Main square wave melody
Part 2: Bass line
Part 3: Paraphonic pads
Part 4: Super Saw arpeggio line
Part 5: Super Saw chords


All parts were recorded to separate tracks using Redshift 6’s six individual outputs.Drums and FX were added in post-production in the DAW.

With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups.

Under the hood, Redshift 6 is always multitimbral—there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Voice allocation, polyphony/paraphony, group settings, and other parameters are easily configured in the Parts view.

Multitimbrality allows Redshift 6 to function as multiple independent synthesizers. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character."

Redshift 6 -All Preset - No Talking#synth #electronicmusic

video upload by SICK FOR SYNTH

"Redshift 6, the new analog polyphonic synthesizer from Supercritical Synthesizers. 6 voices, up to 96 oscillators, variable character filter, MPE and multitimbricity.

🔊 Listen to his factory presents."

Questo Synth Suona 96 Oscillatori (!) – Redshift 6 Recensione

video upload by SICK FOR SYNTH

"In questo video metto le mani sul Redshift 6, il nuovo sintetizzatore polifonico analogico di Supercritical Synthesizers. 6 voci, fino a 96 oscillatori, filtro a carattere variabile, MPE e multitimbricità: è il synth analogico più flessibile del momento?

🔊 L’ho testato in profondità: vi mostro i suoni, l’interfaccia, le funzionalità avanzate e condivido le mie impressioni dopo averlo usato nel mio setup"

In this video, I get my hands on Redshift 6, the new analog polyphonic synthesizer from Supercritical Synthesizers. Six voices, up to 96 oscillators, a variable filter character, MPE, and multi-timbral capabilities: is it the most flexible analog synth around?

SOSTIENI IL CANALE Acquista 🙏 Il mio libro sui sintetizzatori (guida per pricipianti): https://www.amazon.it/dp/B0F8SZ5KVD"

"🔊 I've tested it thoroughly: I'll show you the sounds, the interface, and the advanced features, and share my impressions after using it in my setup.

SUPPORT THE CHANNEL Buy 🙏 My book on synthesizers (beginner's guide): https://amzn.to/44YuCd4"

Redshift 6 - Melodic Techno Demo

video upload by Supercritical Synthesizers

"In this Melodic Techno demo, the Redshift 6 is playing four live parts multitimbrally:

Part 1: Polyphonic arpeggio line
Part 2: Stereo unison bass line
Part 3: 5-note paraphonic chord pad
Part 4: Monophonic 303-style bass line

All parts were recorded to separate tracks using Redshift 6’s six individual outputs.Drums and FX were added in post-production in the DAW.

With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups.

Under the hood, Redshift 6 is always multitimbral—there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Voice allocation, polyphony/paraphony, group settings, and other parameters are easily configured in the Parts view.

Multitimbrality allows Redshift 6 to function as multiple independent synthesizers. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character."

Redshift 6 - Multitimbral 6-Part Techno Tweak

video upload by Supercritical Synthesizers

"Redshift 6 - Multitimbral 6-Part Techno Tweak

All sounds in this demo come from the Redshift 6. The kick was sent out dry from the main output, while the other five parts — including the hi-hat, rumble, two LFO-bleep tracks, and a backing synth track — were routed through the auxiliary output. The aux output was fed into a Zoom Multistomp MS-100 pedal for delay and reverb.

With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups.

Under the hood, Redshift 6 is always multitimbral—there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Voice allocation, polyphony/paraphony, group settings, and other parameters are easily configured in the Parts view.

Multitimbrality allows Redshift 6 to function as multiple independent synthesizers. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character."

Redshift 6 - From Reset To Preset: 6-part Preset for Live Keys

video upload by Supercritical Synthesizers

00:00 - 6-part multitimbral preset for live playing
00:15 - Part 1 - el.piano: setting 5-note paraphony, DCO, VCF, and AMP shaping with VCF and AMP ENVs
02:08 - Part 1 - el.piano: adding Pan and Volume modulations
03:15 - Part 1 - el.piano: adding pitch transient (detune and osc2 pitch) with Aux ENV
04:30 - Part 2 - pad: setting 5-note paraphony, DCO, VCF, and AMP shaping with VCF and AMP ENVs
05:05 - Part 2 - pad: layering with el.piano
05:16 - Part 2 - pad: adding glide, detune, pan modulation
06:00 - Part 2 - pad: adding pitch modulations (TRI & SAW LFOs)
06:43 - Part 2 - pad: layering with el.piano, adding stereo panning
07:11 - Part 1 & 2: setting key zones for both parts
08:00 - Part 6 - bass: setting 1-note mono, ladder character, basic bass sound shaping
09:01 - Part 6 - bass: adding to Group A, key zone limits
09:16 - Part 1 & 2 & 6: layering el.piano, pad and bass
09:28 - Part 6 - bass: glide, legato, tweaking
09:48 - Part 1 & 2 & 6: layering el.piano, pad and bass
10:02 - Part 3 - FX sweep: setting noise source, BPF filter mode, ENV tweaking
11:55 - Part 3 - FX sweep: adding Group A for layering, fine-tuning
12:33 - Part 3 - FX sweep: pan modulation, key zones
12:50 - Part 4 - pluck: setting 1-note mono, basic shaping
13:35 - Part 4 - pluck: adding randonNote pan modulation, fine-tuning
14:05 - Part 4 - pluck: adding Group A, key zones
14:22 - Part 1 & 2 & 3 & 4 & 6: layering all and fixing decay vs release
15:07 - Part 5 - lead: tuning, key zones, stack, detune, ENV shaping
15:42 - Part 5 - lead: 1-note mono, 2-voice unison with pan spread, fine-tuning, adding Group A
16:15 - Layering all parts

"With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups. Under the hood, Redshift 6 is always multitimbral — there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character.

With each of the Redshift 6’s six voices capable of generating up to 16 oscillators for a total of 96, the Redshift 6 offers an impressive expansion in overall polyphony. A single voice supports up to five paraphonic notes simultaneously, each featuring dual oscillators and a noise source. These notes can have independent amplitude shaping, thanks to the Redshift 6’s dedicated DCO ENV envelope generators."

Supercritical Synthesizers Releases Redshift 6 Update 1.3 Featuring 6-Part Multitimbrality

Press release follows:

"Supercritical Synthesizers has just released a new firmware update for the Redshift 6 and it’s available on their website. Firmware Update 1.3 introduces 6-part multitimbrality and multitimbral presets.

With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups. Under the hood, Redshift 6 is always multitimbral — there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character.

With each of the Redshift 6’s six voices capable of generating up to 16 oscillators for a total of 96, the Redshift 6 offers an impressive expansion in overall polyphony. A single voice supports up to five paraphonic notes simultaneously, each featuring dual oscillators and a noise source. These notes can have independent amplitude shaping, thanks to the Redshift 6’s dedicated DCO ENV envelope generators.

Watch the multitimbral Redshift 6 in action: [posted here]

Added
Multitimbrality
Preset preview: presets are automatically loaded while browsing
Amp & VCF envelope ADSR controls now have CC numbers
Key page now has controls for Low/High key limits
Multitimbral factory presets
Various improvements and tweaks

Fixed

Fixed all known bugs

Supercritical’s Redshift 6
Redshift 6 is a true Sonic powerhouse. With 16 analog oscillators per voice and a 4-pole analog multimode filter featuring drive and character controls, it effortlessly delivers everything from super saw stabs to lush pads and from unison basses to vintage poly synth sounds. The Redshift 6’s 4 envelopes and 4 LFOs, combined with complex yet easy-to-assign modulation possibilities and the 32-slot mod matrix, offer endless possibilities for sound design.

Each of the Redshift 6’s six voices features a Demon Core Oscillator, capable of generating up to 16 simultaneous analog oscillators per voice. These oscillators can be assigned in various ways, from lush polyphonic textures to a massive 96-oscillator unison."

Redshift 6 - From Reset To Preset: Stuttering DCO Echoes

video upload by Supercritical Synthesizers

"In this video, we create a two-part synth split featuring a stuttering synth lead and a unison bass pad.

With Redshift 6, multitimbrality is always at your fingertips. Its user interface is built from the ground up to enable a seamless workflow between mono- and multitimbral setups.

Under the hood, Redshift 6 is always multitimbral—there’s no need to switch to a specific multitimbral mode. A new multitimbral synth part can be activated with just the push of a button. Voice allocation, polyphony/paraphony, group settings, and other parameters are easily configured in the Parts view.

Multitimbrality allows Redshift 6 to function as multiple independent synthesizers. Each part can be polyphonic, paraphonic, or monophonic, and each can have its own unique character.

00:00 Intro
00:22 Part 1 - Stuttering Synth Lead
01:52 Part 2 - Saw Bass Pad
02:20 Setting Polyphony and Group Assignments for Parts
03:05 Setting the Keyzone for the
04:06 Selecting the Character for the Bass Pad
04:45 Assigning Unison for the Bass Pad
05:25 Assigning LFO Filter Modulation for the Bass Pad
08:42 The Final Result"

Redshift 6 - Multitimbral Sound Demo

video upload by Supercritical Synthesizers

"Supercritical is thrilled to unveil multitimbrality for the Redshift 6 — a powerful new feature that makes the Redshift 6 more versatile than ever.

With six-part multitimbrality, the Redshift 6 can now assign its voices in multiple ways: split across keyboard zones for traditional polyphonic setups, layered to play rich, combined textures, or used as six independent one voice parts. Thanks to its paraphonic architecture, those one voice parts can still be played as full chords.

The update also unlocks the Redshift 6’s two auxiliary outputs, allowing individual timbral parts to be routed separately for more flexible mixing and sound design.

You can try the multitimbral Redshift 6 yourself at Superbooth 2025 — visit us at Bungalowdorf B020 in Berlin.

The multitimbral beta firmware is available now on the Supercritical Discord for all Redshift 6 users."

Redshift 6 - Superbooth 2025 Sound Demo

video upload by Supercritical Synthesizers

"Hear all our multitimbral Redshift 6 presets for the Superbooth 2025 — no talking, just pure playing.

These presets showcase a wide variety of sounds, from classic analog poly-synth layer splits to rich single-layer textures and one-key wonders.

The Redshift 6 is a 6-voice analog poly, but with 16 oscillators per voice, it goes far beyond the capabilities of a traditional 6-voice synth. Each voice can be played paraphonically, significantly extending the overall polyphony.

Thanks to its flexible voice allocation, voices can be used in splits, layers, or as fully independent parts — each with its own MIDI channel and controls. In essence, every voice is its own synthesizer. And with paraphony, even a single voice can become a polyphonic synth.

All the sounds in this demo are played live using a single Redshift 6, with no external FX.

Huge thanks to Novation for the Launchkey 61 MK4!

The multitimbral beta firmware is available now on the Supercritical Discord for all Redshift 6 users."

SUPERBOOTH 25: Supercritical Synthesizers Redshift 6

video upload by Sound On Sound magazine

"Supercritical Synthesizers have announced an upcoming firmware update that greatly expands the capabilities of the Redshift 6, the six-voice polysynth that launched in late 2024."

Multitimbrality Comes to Supercritical Synthesizers Redshift 6

Redshift 6 - Multitimbral Techno Tweak video upload by Supercritical Synthesizers

"We are super excited to introduce multitimbrality — it makes the Redshift 6 more than six times more powerful than it already is.

On this demo, we put the Redshift 6’s new multitimbrality feature to the test.

The multitimbrality is currently in beta testing, and this demo uses the beta firmware. The firmware is available on our Discord server. You can join our Discord to access beta versions of the firmware, discuss technical details and development of the Redshift 6, and share demos.

The Redshift 6 is six-part multitimbral, and the new multitimbrality feature makes it possible to assign its six voices in various ways.

The voices can be split into traditional polyphonic keyboard zones, layered across multiple parts to play simultaneously, or, for example, used as six monophonic parts. Thanks to the Redshift 6’s paraphony, these monophonic parts can also be used to play chords.

This demo was recorded live using the Redshift 6’s main and auxiliary outputs. The Dub Chords and Reso Chords were recorded in stereo from the main output and AUX 1. The bass line and noise were recorded in mono from AUX 2.

When the parts are panned left and right, the Redshift 6’s three outputs provide six mono outputs, allowing each of the six parts to have its own dedicated output.

All the synth sounds in this demo were recorded live from the Redshift 6. The drum and FX sounds are samples, created using only the Redshift 6. These samples were sequenced in a DAW after the live tweaking.

We are attending Superbooth 2025 in Berlin. If you're coming to the event, stop by and test the Redshift 6. You can find us at Bungalow B020 in the Bungalowdorf."

Redshift 6 - Firmware Update 1.2

Press release follows.

"Supercritical Synthesizers have just released the second firmware update for the Redshift 6 and it’s available at our website. The Firmware Update 1.2 brings Clock, LFO clock sync, NRPN support for parameter control, Mod Lock, and also 65 new presets from Gattobus, Starsky Carr, and our team.

VERSION 1.2

Added
Clock that can be synced via MIDI
LFO clock sync
Tap tempo
All parameters can now be controlled with NRPN and some with CC
Velocity to Amp quick modulation on AMP page
Mod lock
Double-tap a mod source to latch mod assignment mode
Hold a source and double-tap another one to latch mod + via assignment
Tap the blinking source or via button or Esc to unlatch
DCO keyfollow setting -400% to 400% on the KEY page
Keyboard octave switching: Up/Down on Key page, or Shift + Up/Down anywhere
Filter keyfollow snap to nominal 1:1, 2:1, 3:1 (these are not super accurate in self oscillation)
65 new presets by Gattobus, Starsky Carr and our team

Changed
New parameter adjustment logic
Default is as previously, except adjustment is more responsive (much smaller “deadzone” when starting to move a knob)
Holding shift now enables parameter fine tuning, allowing for much smaller adjustments (you can for example adjust tune by less than a cent)
Double-tap Shift to latch fine tune mode, tap Shift or Esc to unlatch
Parameter steps are now accessed by holding down a knob while turning
Perform page now shows clock status and incoming MIDI
Clarify a bunch of names around the UI
LFO Reset Phase now has steps at 25%, 50% and 75%
DCO Stack & Detune visualization now more accurately reflects what’s happening in the voice
Short grace period after adjusting modulation to prevent accidentally changing the parameter
Keyfollow now also follows pitch bend and portamento (might change behaviour of some presets)
Minor visual tweaks and fixes

CLICK FOR MORE »

Redshift 6 - Techno Tweak

video upload by Supercritical Synthesizers

"The hypnodub techno demo track was multitracked using just Redshift 6. All sounds, including drums comes from the Redshift 6.

With the 96 analog oscillators, the Variable Character Filter and its five distinct filter characters, the Redshift 6 provides an excellent starting point for deep sonic exploration."

Redshift 6 - From Reset To Preset: Smiley Lead

video upload by Supercritical Synthesizers

"On our From Reset To Preset series, we noodle sounds from scratch, and showcase our new Redshift 6 synthesizer in use.

This time we created a heavily distorted lead sound, using Redshift 6’s unison mode and the Sour character from the Variable Character filter. The Sour character is a 3-pole, 18dB/Oct filter character that delivers squelchy, acid-like tones."

Supercritical’s YouTube Thing Episode #7 - Update Time 1.1

video upload by Supercritical Synthesizers

"In this episode, we'll give you an update on the development of the Redshift 6, and also share some memories from our recent trip to Buchla and Friends in Los Angeles. We have just released the first firmware update for the Redshift 6 and it's available at our website. The Firmware Update 1.1 brings USB MIDI, new modulation destinations such as: Character, Detune, envelope Attack, Decay, Sustain & Release and also new presets from Kebu.

You can check out our public roadmap to see what is coming. We also have a blog on our website, where we will share updates on the development of the Redshift 6 and occasionally dive deeper into various technical subjects. There is also a Discord server, if you want to discuss the roadmap or technical details with us directly, the link is also on our homepage."