Happy Birthday Bob Moog - 1979

Via Brandon Daniel.

Full page ad from a 1979 issue of Contemporary Keyboard magazine.

Happy Birthday Robert A Moog via the electro-music.com forum

Title link takes you there. Looks like the poster picked the Wendy Carlos portrait as well.

Happy Birthday, Bob Moog via CDM

Title link takes you to the post on Create Digital Music.

Thanks Bob - Mark Pulver

Couldn't think of a better day to put up another post on Mark Pulver's tattoo tribute to bob. Mark sent this in with birthday wishes to AH. If you blow it up you can see a message that reads, "Thanks Bob." Title link takes you to more. BTW, if you have anything you want to send in tribute to Bob, send it in - email link is always on the bottom right column. This will be a Moog only day.

Bob Moog Portrait by Wendy Carlos - Happy Birthday Bob

Today would have been Bob Moog's 72nd birthday. I've been waiting to put this shot up. A portrait by none other than the woman who possibly started it all, Wendy Carlos.

Happy Birthday Bob. Thanks for everything.

Caring Bridge
Moog on Wikipedia
Big Briar
Moog Music
Wendy on Wikipedia

X-Station Faders - New Flickr Shot

flickr by Daragh.

Roland System 100 - New Flickr Shots

flickr by mixdelayoutonly. Yep.... Title link takes you to more.

Hmm... Might have put this post up too soon. I subscribe to a couple of flickr feeds and got to the shot above first, so it went up and it will stay. However there are some really nice gear shots in the set as well, such as this shot of a Jupiter 6. The gear in the shots are immaculate - some of the cleanest I've seen. Title link has been updated to bring you to the start of the set.

Melbourne, Australia DIY Modular Synth Builders unite

For those of you in Australia, Ross Healy asked me to post the following. Sounds like a great idea.

"Melbourne, Australia DIY Modular Synth Builders unite

In the Spirit of the 60's Modular synth builders....

Modular Synths cost way too much for Australians to import (I know I
just bought a 5 panel Serge Modular Synth) so kits seem to be the best
option, but for a noobie to solder and build here is an idea...

This idea came from *Serge Tcherepnin and the 60's spirit.

I have a classroom in the centre of town that we could use on 1
Saturday a month to get together and build modular kits. W*e would all
buy the same board and parts ( say of a Ken Stone - Low Pass Filter) and
build it all on the same day, this would enable people with no knowledge
to be next to people with no knowledge and in the process have fun.

I am collecting names of people who are interested, I am hoping to get
10 - 15 people max interested (already have 5 people, all you need to do
is get involved in the spirit ..., pay nothing except for the Board,
parts, and your own solder etc. and come along..

Contact Ross Healy healyr@tpg.com.au and I will start to get the ball
rolling."

Juno 106 Replacement ICs

There is finally hope for the dreaded failed voice of the Roland Juno 106. Someone has cloned the chip.

Click here for the official page on the chips with more info and how to get them. They are also up for auction here.

Anyone else thinking what I'm thinking? These might be great for a DIY project or a new synth.

Details:
"The most common problem with juno-106's is one or more of the voices going dead or that keep hanging. The problem is the poorly manufactured A1QH800170 or A1QH80017A custom vcf and vca ic. Since these ic's are no longer manufactured and roland has no spares for them anymore, we are forced to scrap other 106's for spares. Which is not a good idea because every single one of these ic's will die. Therefore I did some research on those ic's.
First I designed a vca clone, that only took over the vca of the 80017A, but still used the vcf part (if that was still alive). This design was completed at the end of 2003. Numerous of these ones have been sold and installed to great succes in juno's worldwide.
After that I continued my research on this ic with the goal of designing a full clone of it. This was a particulary hard job because only little is known about the intestines of this ic: only the rough outlines which are displayed in the juno-106 service manuals and the little info that is available on the IR3109 and how it is used. It took no less then 6 restarts from scratch until I had a prototype of which I thought that it was on the right track. The bigest problem was the creation of an exponential current source that has the same error and temperature tracking as the one inside the IR3109 (of which no one knows how it was built). When this problem was solved (about nov 2004) I could start doing signal analysis on both an opened 80017A and my design to adjust gain levels so that the non-linearities (tanh) of each stage were the same(summer of 2005). After that I designed a smd prototype for further testing which surfaced more problems: strange behaviour with resonance at very high and low frequencies, which were all solved by the end of 2005. At this moment I was unable to measure nor hear any difference between the original and the clone. After that I built some more prototypes and installed these in 4 different juno's owned by different people. These have been in test for several months now and none of these people were able to tell which voice had the clone.
After that only minor changes (pcb-design)were done until the final design which is now (may 2006) for sale:

summary:
-Designed and built to the highest standard.
-No measurable nor audible difference with the original. I'm very serious about this and I'm well aware that my clone is the only one which sounds right.
-All integrated components are in mass-production by more than one manufacturer and have been available for over a decade. Thus have a proven reliability and are easy optainable(in the very unlikely event of failure).
-Used discretes are close tollerance and high quality (capacitors are the infamous panasonic stacked pps film ones)
-very high quality pcb.
-Installation is straightforward: remove the defective 80017A , replace it with my clone and re-adjust your juno as described in the service manual. (please do not ask me how to do this. I simply do not have the time to give electronics lessons. If you don't have the knowledge: consult your local synth-geek)"

Serge Modualr Synthesizer Prototype - New Flickr Set

flickr by wayneandwax. Title link takes you to more.