via Bernd Scholl on The MATRIXSYNTH Lounge
Full gallery herehttps://www.facebook.com/bernd.scholl/media_set?set=a.10200805596246757.1073741827.1368852242&type=1.
Tuesday, October 08, 2013
Access Virus TI Moonbooter Retrofitting
via Bernd Scholl on The MATRIXSYNTH Lounge
Full gallery herehttps://www.facebook.com/bernd.scholl/media_set?set=a.10200805596246757.1073741827.1368852242&type=1.
Modular System DOEPFER MAKE NOISE VERMONA TIPTOP
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"DOEPFER A149-1 + DOEPFER A149-2 + DOEPFER A156 + MAKE NOISE FUNCTION + MAKE NOISE WOGGLEBUG + VERMONA FOURMULATOR + TIPTOP uZeus + 3U rack tray"
via this auction - learn how to sell on eBay here
"DOEPFER A149-1 + DOEPFER A149-2 + DOEPFER A156 + MAKE NOISE FUNCTION + MAKE NOISE WOGGLEBUG + VERMONA FOURMULATOR + TIPTOP uZeus + 3U rack tray"
EMS SYNTHI A +TKS keyboard/sequencer +EMS Books
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
via this auction - learn how to sell on eBay here
MULTIVOX PULSER SN 875011 DUOPHONIC ANALOG SYNTH W AFTERTOUCH
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"A RARE MULTIVOX PULSER M 75 OR MX 75.
DUOPHONIC INTERESTING LITTLE SYNTH WITH AN ANALOG FAT SOUND.
CV GATES FOR EXTERNAL CONTROL AND AFTERTOUCH ACTION.
EDITABLE PRESETS. LFO, MODULATION ON FILTER, DUAL VCO CONTROL, RANDOM SOUND, AND A LOT MORE STRANGE POSSIBILITIES.
TOUCH SENSOR EFFECTS, GLIDE (SIMILAR TO THAT OF A MINIMOOG).
VERY ANALOG SOUNDING 2 OSC BEAST.
IT REQUIRES SOME MINUTES TO TUNE UP, VERY STABLE AFTER THEN.
GOOD AESTHETIC CONDITION WITH NO ISSUES."
via this auction - learn how to sell on eBay here
"A RARE MULTIVOX PULSER M 75 OR MX 75.
DUOPHONIC INTERESTING LITTLE SYNTH WITH AN ANALOG FAT SOUND.
CV GATES FOR EXTERNAL CONTROL AND AFTERTOUCH ACTION.
EDITABLE PRESETS. LFO, MODULATION ON FILTER, DUAL VCO CONTROL, RANDOM SOUND, AND A LOT MORE STRANGE POSSIBILITIES.
TOUCH SENSOR EFFECTS, GLIDE (SIMILAR TO THAT OF A MINIMOOG).
VERY ANALOG SOUNDING 2 OSC BEAST.
IT REQUIRES SOME MINUTES TO TUNE UP, VERY STABLE AFTER THEN.
GOOD AESTHETIC CONDITION WITH NO ISSUES."
Serge Modular Soup Kitchen 1
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"STS Soup Kitchen 1, Oakland build, exact year unknown - best guess is early 90s. Everything working perfectly.
You know the modules:
PreAmp Detector
Frequency Shifter (internal carrier)
Control Module
Wilson Analog Delay
3 x 1 mixer
Variable Slope VCF
Resonant Equalizer
Dual Phaser
Dual Channel Stereo Mixer
One of the most classic Serge panels ever. Includes PS2A power supply. This unit would be over $6k new with PSU... a steal, a N/R auction starting at $2k."
via this auction - learn how to sell on eBay here
"STS Soup Kitchen 1, Oakland build, exact year unknown - best guess is early 90s. Everything working perfectly.
You know the modules:
PreAmp Detector
Frequency Shifter (internal carrier)
Control Module
Wilson Analog Delay
3 x 1 mixer
Variable Slope VCF
Resonant Equalizer
Dual Phaser
Dual Channel Stereo Mixer
One of the most classic Serge panels ever. Includes PS2A power supply. This unit would be over $6k new with PSU... a steal, a N/R auction starting at $2k."
ROLAND GR33B VINTAGE BASS SYNTHESIZER
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"This bass synth works with Roland G33, G77, G88 bass synth guitar controllers with the 24 pin Roland connector cable. This is a classic analog Roland bass synthesizer, which works very well with the above controllers, as well as 13 pin compatible synths, with appropriate converters, such as built by Wayne Scott Joness, joness.com"
via this auction - learn how to sell on eBay here
"This bass synth works with Roland G33, G77, G88 bass synth guitar controllers with the 24 pin Roland connector cable. This is a classic analog Roland bass synthesizer, which works very well with the above controllers, as well as 13 pin compatible synths, with appropriate converters, such as built by Wayne Scott Joness, joness.com"
Roland TB303 Bass Line Synth - Original Manual Card
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"This card is designed to be folded up and probably carried along with the TB303 in your vinyl carry case, for quick reference or impressing hipster collectors in coffee shops..."
via this auction - learn how to sell on eBay here
"This card is designed to be folded up and probably carried along with the TB303 in your vinyl carry case, for quick reference or impressing hipster collectors in coffee shops..."
Logan String Melody II VIntage Analog String Synth
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
via this auction - learn how to sell on eBay here
CWEJMAN S1Mk2 SN S1-MK2-036
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Here's an excerpt from the manual:
The S1 is a semi-modular, analogue monophonic synthesizer. It is easy to get started with since it is prepatched for optimal use of its sound producing possibilities and eliminates the need for external connections between modules during use. Each module can be disconnected and used separately, e.g. to control or be
controlled by other instruments. This flexibility enables and simplifies experimentation with creation and reproduction of sound.
* Three oscillators with seven basic waveforms
* Ring modulator
* Noise generator with two three noise shapes
* Low pass filter with selectable 4 / 6 poles and quasi band pass mode
* Multi mode filter with selectable 2 to 6 poles and three modes
* Wide range envelope generators
* Master amplifier with build-in overdrive stage
* LFO with seven basic waveforms and wide rate range
* Extensive modulation of, virtually, all synthesis parameters
* Build-in MIDI to CV/gate converter with 16-bit resolution
Several parameters can be voltage controlled by external signals and, simultaneously, control external devices
by the build-in MIDI converters voltage outputs (see Rear Panel). The S1 is a stand alone instrument and the
possibility with patching and integrating it into an external modular (or semi-modular) synthesizer makes it
extremely flexible."
via this auction
"Here's an excerpt from the manual:
The S1 is a semi-modular, analogue monophonic synthesizer. It is easy to get started with since it is prepatched for optimal use of its sound producing possibilities and eliminates the need for external connections between modules during use. Each module can be disconnected and used separately, e.g. to control or be controlled by other instruments. This flexibility enables and simplifies experimentation with creation and reproduction of sound.
* Three oscillators with seven basic waveforms
* Ring modulator
* Noise generator with two three noise shapes
* Low pass filter with selectable 4 / 6 poles and quasi band pass mode
* Multi mode filter with selectable 2 to 6 poles and three modes
* Wide range envelope generators
* Master amplifier with build-in overdrive stage
* LFO with seven basic waveforms and wide rate range
* Extensive modulation of, virtually, all synthesis parameters
* Build-in MIDI to CV/gate converter with 16-bit resolution
Several parameters can be voltage controlled by external signals and, simultaneously, control external devices
by the build-in MIDI converters voltage outputs (see Rear Panel). The S1 is a stand alone instrument and the
possibility with patching and integrating it into an external modular (or semi-modular) synthesizer makes it
extremely flexible."
WMD Pro Output Headphone Amp & Output Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
Perfect Circuit Audio (RSS)
"Balanced professional grade outputs and high quality headphone driver!
The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.
Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.
The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.
Controls and I/O
Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.
Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.
The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.
With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.
Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.
+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Features
High Headroom
Low Distortion / Low Noise
DC Coupled Signal Path
-10dBV Stereo Mini-jack Output
+4dBu Balanced Outputs
High Quality Headphone Amplifier
Loudness Limiting (Can be Disabled)
3.5mm and 1/4" Headphone Outputs
Completely Transparent Signal Path
6 HP, +60mA/-60mA"
via this auction - learn how to sell on eBay here
Perfect Circuit Audio (RSS)
"Balanced professional grade outputs and high quality headphone driver!
The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.
Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.
The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.
Controls and I/O
Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.
Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.
The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.
With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.
Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.
+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Features
High Headroom
Low Distortion / Low Noise
DC Coupled Signal Path
-10dBV Stereo Mini-jack Output
+4dBu Balanced Outputs
High Quality Headphone Amplifier
Loudness Limiting (Can be Disabled)
3.5mm and 1/4" Headphone Outputs
Completely Transparent Signal Path
6 HP, +60mA/-60mA"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
