E-70 o) Fool's Gold: the Alaska Overture [Ode to Electone]

YouTube via FlametopFred, via the Forum.
"by vamping on some UK and Supertramp, came up with this new composition that fuses the two ideas behind "Alaska" and "Fool's Overture"

Finding that the Yamaha E-70 home organ is a very inspirational (and fun) music making machine. Everyone should have one. Some assembly required."

Yamaha CS-5 repair

via Cliplead where you'll find info on how to remove the front panel as well as a link to a flickr set with more shots of the inside.

TENORI-ON To Launch Worldwide

"In 2007, we held the exclusive UK launch exhibitions of TENORI-ON at Phonica Records London (4th Sept) and theMint Lounge Manchester (5th Sept). Following the huge TENORI-ON success in the UK, we can finaliy proudly announce to hold the TENORI-ON world Launch Tour." more info including the schedule here

Pt 2 Analogue Systems rs370 module 6-Voice Synth + MUCH more

YouTube via bigcitymusic.

Part 1 here.

"Here is part 2 in our demo of the multi-faceted rs370 eurorack module from Analogue Systems. Known as the "Polyphonic Harmonic Generator", it is a 6-voice polyphonic modular synthesizer w/ extensive control via MIDI and control voltages (CV) simultaneously. If that isn't enough it is also a polyphonic MIDI to CV converter!
* 6-voice polyphonic
* 4 oscillators per note
* 6 envelope generators( 6 stages and 10 control points) which can be patched out and back into the synthesiser
* 6 VCA's
* 2 LFO's (each with 5 waveforms plus midi sync etc)
* Arpeggiator (with 4 different modes and MIDI sync)
* 3 types of synthesis: Subtractive (using the built in analogue waveforms), Additive and Wavetable.
* 46 User Memory locations filled with 43 Factory Sounds that are held in Rom and can be overwritten or recalled at any time.
* Many outputs and inputs and further expansion can be obtained using either the rs375 or rs376 expander module."

Roland SH-101 + Juno-60 Analog Synthesizers by RetroSound

YouTube via retrosound72

"vintage synth demo by RetroSound
analog pads: Roland Juno-60
bass-seq: Roland SH-101, triggered by the TR-606
drums: Roland TR-606"

'The Moog Synthesizer featuring The Plastic Cow'

flickr by letslookupandsmile

full size

Me and my friend playing synths

YouTube via lewisjp8young. Sent my way via Dave.
"Terry did not know that i was recording him while he started to strut his funky stuff."
No this is not me nor Dave. I always use the title of the YouTube video, and Flickr shot for that matter, for the titles of posts. I can then easily search to see if I put something up by either the title or the YouTube via x.

polar 60 schmidtbauer nowakowski

I just updated this post on Polar 60 with a new video. Check it out.

220C Quarter Project Modeling the Emu Systems SP-12

"This is a project page describing the progress of my current 220C quarter project.

The Emu SP-12 is a sampler/drum machine unit that was released in the 80's. It allows the user to sequence loops using either internal drum sounds or sounds sampled into the machine. The machine allows for a total of 5 seconds of sampling time, which is separated into two banks of 2.5 seconds each. After sampling a sound into the SP-12, the user is able to edit the length at both the start and stop points, the tuning of the sound, the decay of the sound, loop points, and also are able to send the sound through an analog dynamic filter.

The goal of this project is to develop a program that allows the user to input some .wav file, and get back a sound that sounds like it was sampled by the Emu SP-12. This project is both a study of modeling equipment through circuit analysis/testing, and a study of why the dirty sound of the SP-12 sound is so popular."

click here for more. via Walkathon

Wall of Phoenix - Mattson Mini Modular

What you are looking at is the first eight Phoenix Edition Mattson Mini Modulars. Each base system consists of two cabinets that fold together into a little suitcase with a handle on each cabinet. This makes it simple to carry either each cabinet individually, or together latched and closed. This entire system is actually latched together. For each individual system, the left cabinet holds ten modules with a power supply and MIDI-CV converter, and the right has space for twelve additional modules which you can order individually at any time. You can latch as many systems together as you like in whatever configuration as you like.

The system pictured here would consist of roughly 16 cabinets x 12 modules for a total of 192 modules, or 176 modules not including the power supplies and MIDI-CV (the Ms are blank panels). Note that with this setup you would be able to run eight individual MIDI channels into the system - think 8 tracks of modular mayhem.

This image is of course of the reflective logos on back of each cabinet. Note the hardboard backs referred to in this previous post. The contrast with the logo looks very nice. You can see the custom wood back of Serial #1 on the bottom left. The non-reflective one is mine, Production Prototype #1. All other systems will have the reflective logos and hardboard backs.

BTW, be sure to click the images for the full size shots. You can find a few more in this flickr set. Click an image followed by the All Sizes link when you get there.

Update: They actually do lock together vertically. I updated the post above to reflect this. Via George Mattson: "They lock together vertically also so the entire structure is latched solidly together. If you look at the unfinished pix of the cabinets (from the front), you’ll notice four squares mounted to the inside of the backs about 1” from each edge. Those are the support spacers for the 8-32 T-Nuts that are epoxied to the back.

On the back, you can see the heads of those 8-32X3/8 screws waiting quietly in the corners screwed into the T-Nuts.

I supply two-3” straps made out of 13ga steel with slotted holes on each end. One of the straps locks the cabinets together when the system is closed. Both straps can be used for structural support by mounting them between cabinets (horizontally or vertically) using those 8-32 screws screwed into the T-nuts in the corners."