Pro2 & TR8 [good bananas]

Published on Oct 8, 2014 Trooper Starship

"again only Pro2 (even the 303'ish part) and TR8 (drums)
FX: RMX500, BigSky, TC D-Two, Echolution 2
HQ download: https://soundcloud.com/the-trooper-1/..."

Dave Smith Pro 2s on eBay | Roland Airas on eBay

Audio Damage Sequencer 1 Now Available

The Sequencer 1 has arrived.

Details via Audio Damage

"Sometimes, a company has to throw down the gauntlet and say 'this right here is the best thing, period, full stop.' Sequencer 1 is that thing. It is, empirically, the most sophisticated Euro-rack sequencer available. With a musically intuitive approach to programming, a massive helping of generative functions, and a feature list as long as, well, a really, really long list, Sequencer 1 covers all the bases, and then some.

With Micro SD card storage and software updates, backing up and updating are as easy as dragging and dropping. Four banks of 16 patterns (each up to 64 steps) make live performance a breeze. Front-panel one-push access to all commonly-used features means no menu diving, no rote memorization of hex codes, and no confusion. 1V/Oct, Hz/V and gate/inverse gate/S-Trig outputs mean it'll drive both modern Eurorack and vintage analog synths. Hell, the three tempo-synced LFOs are worth the price of admission alone.

In short, Sequencer 1 is the end-all-be-all of production sequencers, for both studio use and live performance, and the feature list will only get longer, with a clear roadmap of updates and additions, and all the programming knowledge and experience that Audio Damage can bring to bear on this, our flagship product.

» Four banks of sixteen patterns each, for a total of 64 patterns.

» Each pattern can be 1 to 64 steps.

» Direct front-panel access to all major features; hardly any menu diving.

» Micro SD Card (on back of unit) for pattern storage and super-simple firmware updates. 2gb Micro SD card included with unit, pre-installed with latest firmware.

» 1V/Oct and Hz/Volt pitch CV output.

» Individually programmable gate and accent outputs, with selectable gate, inverse gate (vintage Yamaha), and S-trig (vintage Korg and Moog) modes.

» External sync, run, and reset inputs. (1 pulse per step currently. 24- and 48-ppq DIN sync coming soon!)

» Zero-latency sync, run, and reset outputs. (24- and 48-ppq modes coming soon!)

» Three tempo-synced internal LFOs with 25 waveforms, phase, three voltage modes, and length from single step to 256 steps (16 measures at 4/4).

» Two CV inputs for modulating current step, step mode, gate length, current pattern, transpose, repeat mode, and ratcheting.

» Three CV outputs programmable per step, with several LFO modes (replace, addition, and multiplication).

» Programmable per step: pitch, gate, accent, note length/tie, three CV output values, slide, and ratchet.

» Programmable per pattern: swing, number of steps, playback mode (forward, reverse, two ping-pong modes, random step, every other step, and walk.)

» Front-panel 'Repeat' functions for live-cutting of sequences; repeats the last 8, 4, 2, or 1 step(s) while held down. Also a CV modulation target.

» Front-panel 'Ratchet' functions for ratcheting 2 or 4 times on each step while held down. An additional 3-step ratchet is available for direct programming per step.

» 20mm depth, eminently skiffable.

» 36HP width, 110ma current draw on the +12V buss.

» Manual coming soon."

Roland Jupiter 6 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Shades of Detroit by a guy called Gerald

Published on Oct 8, 2014 A GUY CALLED GERALD

"To reinvent Melody would be impossible
So this is Melo G"

"Sorry this music has no guide rails for the new be dancer but if you let go you might find you can fly to ;)"

Roland Airas on eBay

deux rene

Published on Oct 8, 2014 SunFallsMusic

"1st lil session with both Makenoise Rene's in effect.
Rene-right - cv out to rene left xCV in.
Rene-left x gate out to rene right yclock in.
Having to break out the Rene manual to lock in the mad science on the logic functions to get the most out of cross modulation."

QU-BIT NEBULAE // the modular SAMPLER // miniature 1 // plays Bach

Published on Oct 8, 2014 LESINDES

"miniatures present
QU-Bit EUro Rack module Nebulae. Sample playback machine"

Qu Bit Electronix RT-60 Modulation Example

Published on Oct 8, 2014 Analogue Zone Showroom / Hangszer

"A basic demonstration of the voltage controlled DSP effects of the Qu-Bit Electronix RT-60.

In this patch, the melody sequence comes from the Make Noise STO controlled by the Modcan Touch Sequencer, then it goes to the Make Noise MMG which is "striked" by the Modcan Touch Sequencer's Gate output.

The RT-60's DSP effects are modulated from 2 sources:
The Soundmachines LS1 Lightstrip and the Make Noise Maths' envelopes. (As Maths' left envelope ends it triggers its right envelope). The parameters modulated by the LS1 are the 'Mix' and the 'Amount' which produces different results with different effects. The parameters modulated by Maths' envelopes are 'Verb Time' and 'Rate'."

Modcan Touch Sequencer - 4 Row Example

Published on Oct 7, 2014 Analogue Zone Showroom / Hangszer

"Patch Description: A basic demonstration of using all 4 rows of the Modcan Touch sequencer. All 4 rows have different roles in the patch. Row 1 sends a CV to the Make Noise STO's 1V/octave input (quantized CV values set internally on the Touch Sequencer - scale: penta-minor), thus creating a melody, while Row 2 sends CV to its Shape input. Row 3 sends CV to the Make Noise MMG's cutoff CV input. Finally, Row 4 sends modulation to the Qu-Bit Electronix RT-60 reverb time parameter."

TAMA TECHSTAR TS204 SN 200819

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"· The Synth voice has nine knobs that give you total control over a variety of parameters you can set to create anything from a booming bass to piercing high bleeps and beeps

· The Hand Clap is an awesome electronic clap like the Roland/Boss machines are known for, and can be manipulated with a few knobs as well
· The voices are triggered by either plugging an electronic drum pad into a “trigger” jack for either voice on the back of the unit; or, by plugging any drum machine, synth, noise maker’s output to the input jack for each voice
· Two rack-spaces tall
· Totally analog electronic pathway and REALLY fun to play wit"

CLICK FOR MORE »

Subatomic Modded Roland MC-202

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The mods are:

1a,2a.) Proper CV / GATE INPUTS
1b,2b.) Proper CV / GATE INPUTS (using Switch Sockets)
3.) VCF Cutoff cv (input)
4.) PW cv
5.) VCA (limited Volume Control)
6.) MOD
7.) PORTAMENTO CV SWITCH INPUT ( +5V will turn Portamento OFF. 0V will turn it ON. )
8a.) ACCENT (VCA) CV SWITCH INPUT ( +5V will turn ACCENT ON. 0V will turn it OFF. )
8b.) ACCENT (VCF) CV SWITCH INPUT
8c.) Selector for Accent -> VCF/VCA (toggle switch)
9.) Ext Audio Input to VCF Source Mixer
10.) Ext Audio Input to VCA

More information on the modifications can be found here and here"

CLICK FOR MORE »