Modcan 20A Pulse Divider / Dual Switch

via this auction
"http://www.modcan.com/modhtml/modules.html

The PULSE DIVIDER section of this dual function module takes an incoming clock or square wave and outputs a division of its frequency. This is useful for producing time based events that are an even clock division. An example use of this module would be to fire an Envelope generator on every second step of a sequence or use in conjunction with the Boolean module to produce unusual rhythms or to use in the audio range to produce sub octaves below a square wave frequency.

Features:
Divides a single pulse input into 2,4,8,16,32,64 and 128 divisions
Can be used as an octave divider in audio range
All seven outputs can be used simultaneously
Ideal analogue sequencer utility module

The second section of this module is a Voltage Controlled switch. When the Gate input is held high the switch passes the X input to the X/Y output. When the gate is low the Y input is switched to output at the X/Y. The opposite can also exist where a signal at the X/Y input can be switched to output from the X or Y jacks

Features:
Switch between 2 inputs to 1 output or 1 input to 2 outputs
Input signals for switching can be modulation voltages, gates and audio

Pulse Divider:
Inputs: 50k ohms
Outputs: 1k ohms
Signal Output: 0-5 V
Signal Input: 0-5 V

Dual Switch:
Inputs: 50k ohms
Outputs: 1k ohms
Signal Output: 5V Pk-Pk
Signal Input: 5V Pk-Pk
Gate Input +5V

Current Requirements:
+20mA at +15V
-15mA at -15V"