New IO Instruments KALYKE DUAL FUNCTION GENERATOR Eurorack Module

via IO Instruments

KALYKE
DUAL FUNCTION GENERATOR
LFO section

Waveform:

controlled/morphed manually via potentiometer or CV. Morphs from Pulse (20-50-90%) -> Sinus (720°) -> Ramp (720°) -> Triangle (680°)

Tempo:

controlled via potentiometer or CV. Center of potentiometer at: 4Hz +/- 8 Oktaves



Repeats:

controlled via potentiometer and reset in. Can be adjusted from 1-14 repeats and endless loop (takes effect after reset in)

ADSR-Mix:
ADSR can be mixed onto LFO with potentiometer


Sample and Hold:

LFO can be switched into S&H mode

Offset:
can be toggled btw -5V to +5V and 0 to +10V via switch

Input:
1xCV for waveform, 1xCV for tempo, 1xReset

Output:
LFO has one positive and one negative CV output


Manual Trigger:
one button to reset LFO (shared with ADSR)

ADSR section

Curve:
continous exponentiell to linear response, controlled via potentiometer

Ratchets:
16 different multi repeats of attacks, controlled via Attack and Decay sliders
Loop:
loop mode from Attack to Release, controlled via switch
Freeze:
all settings get freezes to keep exact positions
Control:
4x30mm faders to control A, D, S and R segments
Manual Trigger:
one button to reset ADSR (shared with LFO)
Output:
ADSR has one positive and one negative CV output, further one trigger out at endof attack, one trigger out at end of decay
Input:
1xGate in (>1V), four modulation inputs to control A, D, S, and R segments (0-5V)
General:

Output Amplitude: 7,5V (ADSR) / 10VPP (LFO)
Frequency Range: LFO 60s – 284Hz /
ADSR 0,4ms-10s (Attack); 0,8ms-20s (Decay/Release)
Trigger out: 2ms/10V
Width: 16 HP