G-Storm Electro 101-VCO Version 2 Roland SH-101 Oscillator Adaptation

video upload by gstormelectro

"101-VCO Version 2 Roland SH-101 Oscillator Adaptation + RD-6 [Demo 1 No Talk]

Audio + Video by G-Storm Electro c. 2023

101-VCO has returned to the fold: the same great sound, simplified and improved tuning, and having all the individual outputs without need for an expander module. All in 12HP
Headphones or good monitors recommended.

Check my Reverb store for 101-VCO availability.
Oscillator | GSE 101-VCO
Filter | GSE JU60-VCF
VCA | GSE 2xVCA
LFO | Feedback LFO10
Output | Pittsburgh Outs
Drum Machine (off camera) | Behringer RD-6
Recorded direct, no other mastering or effects.

*MUSIC* https://gstormelectro.bandcamp.com/
*BLOG* https://gstormelectronica.blogspot.com/
*LISTEN/DOWNLOAD* https://soundcloud.com/gstormelectro
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info."

via G-Storm Electro's Reverb shop

"The 101-VCO has been re-tooled in 12HP! Version 2 continues its authentic realization of the Roland SH-101 Oscillator adapted to Eurorack: that lovely Sub-Octave Generator, that snowy Noise Generator, an integrated Mixer section to bring all the waves together.

Now in revision 2: Improved tuning stability using power rail voltage references. Simplified tuning via coarse/fine tune knobs. Individual waveform outputs without need for any expander module.

101-VCO expands the original SH-101 features to reveal more potential of the 3340 chip: Triangle wave and exponential FM. And 2 flavors of Linear FM: Lo Range to find those vibrato sweet spots, and Hi Range for full-on Linear FM madness. Expand the palette of original sounds using an external CV signal for Pulse Width Modulation that is summed against the initial Pulse Width amount. While the initial PW amount can go right up to the edge of vanishing, PWM can take the Width right down to 0% up to 100% for complete cancellation.

Great care was taken to keep the 101-VCO fully analog circuit as close to the original as possible. Featuring an Alfa AS3340 re-issue chip at the core of the design, surrounded by eight 20mm slide pot controls. With the conventional coarse/fine tuning knobs it will provide full audio range, whether using the v/oct input or not.

Every 101-VCO is meticulously hand-crafted in limited quantities, not mass-produced, and ready to rock your modular world. Includes 16-pin-to-10-pin power connector cable.

Coarse Tune Knob | Initial oscillator frequency

Fine Tune Knob | Initial oscillator frequency, +/-6 semitones range

FM Slider | Amount that an external signal will modulate the frequency

FM TYPE Switch | LO for vibrato, HI/EXP for more dramatic frequency modulation

PULSE WIDTH Slider | initial Pulse Width amount

PULSE WIDTH MODULATION Slider | The amount that an external signal will affect pulse width

SOURCE MIXER Sliders | Adjusts the amplitude amount of each waveform going to the MIX output

SUB-OCTAVE Switch | Select between -1 octave Square, -2 octave Squrare, -2 octave Narrow Pulse

V/Oct Jack | Pitch Initial Frequency input for connecting keyboard controllers or sequencers

FM Jack | Plug in external signals to modulate Pitch here, such as LFO or envelopes

PWM Jack | Plug in external signals to modulate the Pulse Width here, again LFOs are typical

Individual Waveform Output Jacks | These jacks always output their buffered, DC-coupled signals regardless of Source Mixer settings

Mix Output Jack | This is the combined waveform output of the Source Mixer

TUNE Trimmer (on the back) | Affects the initial oscillator frequency

SCALE Trimmer (on the back) | Affects the v/oct tracking of the oscillator"