via this auction
Note auction links are affiliate links. See the site's privacy policy for more info.
"Minimoog style desktop synth from Ken Macbeth. The condition is very good. There are no technical problems. There are a few small scratches on the case. 220 volt power supply included.
3VCOs: VCO1 and 2 have saw, pulse, triangle and sine waveforms and the pulse width can be voltage controlled by external CVs. A low frequency noise with level control is available as well. VCO 1 can hard sync VCO2. VCO3 can be used as a modulation oscillator and can be disconnected from the master CV. Modulation targets are filter cutoff frequency and/or pitch of VCOs1and2. All VCOs have individual outputs, coarse and fine frequency controls, separate CV inputs for controlling frequency and pre-filter level controls.
The filter is a Moog 24dB lowpass filter. It´s input is a mixture of all three VCOs and noise. The cutoff frequency can be controlled by the first envelope generator as well as by an external CV. The filtertracking is switchable between off / half / full (0%, 1V/oct and 1.5V/oct).
The envelopes are ADSRs with a switchable release parameter thats time is depending on the decay parameter, just like the Minimoog. The filter envelope can be also used to control VCO2´s pitch what sounds great when VCO2 is synchronised. Furthermore you can invert this envelope´s characteristic. The second envelope modulates the VCA. If an external CV is patched to the VCA the internal modulation is broken up. A momentary button allows for manual triggering of the envelopes"
No comments:
Post a Comment
Note: comments that insult people will be removed. Critique on gear is allowed. Do not ask if listings are still available. Click through auction links to check yourself. Posts and pics remain for historical purposes. To reduce spam, comments for posts older than one week are not displayed until approved (usually same day).