A Magic Pulsewave Introduces the OBLIQUENCER

video upload by A Magic Pulsewave

Update: New video:

OBLIQUE DUB JAM

video upload by A Magic Pulsewave

"OBLIQUENCER sequencing three+ synth voices in dubspace."




OBLIQUENCER is a melodic and rhythmic sequencer which uses basic pattern building blocks to create musical sequences. It outputs three channels of tuned analog control voltage, and three channels of analog gate signals. Unlike typical sequencers, the user does not enter sequences note-by-note. Instead, the user sets pattern behaviors and routes the resulting patterns internally to melodic and rhythmic parameters, thereby generating musical phrases or compositions. OBLIQUENCER is capable of creating traditionally musical sequences, as well as more unusual, asynchronous, and poly-rhythmic, patterns. OBLIQUENCER may even uncover for the user, a direct understanding of the mathematical nature of the melodic patterns humans emotionally enjoy. Two external inputs can be routed to clock, gate, or trigger any of the internal sub-modules. all internal patching and routing is achieved via pin matrices, with a total of more than 150 patch points. Tuning is entirely variable, and each control voltage output is capable of covering more than a 5 octave modulation range, at one volt per octave.

OBLIQUENCER comes with 40 patch pins and is housed in a handmade wooden enclosure.

OBLIQUENCER SUBMODULES:

(2) CLOCK LFOS- Create continuous square clock at user-defined rate.
(2) "DECADE RINGS" - 2 to 10 step gate sequencers
(2) "RIPPLE GATE SEQUENCERS" - clock dividers with the ability to mix each division /2 through /4096 into a gate signal.
(1) "RIPPLE MELODY SEQUENCER" - 3 bit CV pattern generator using mixed clock dividers to generate CV note pattern sequences. Continuously tunable 0-5V.
(1) MELODY BIT INVERSION MATRIX - Allows patching of other modules into the melody sequencer to alter or generate melodic patterns.
(2) "HARMONY REGISTERS" - Generate accompaniment automatically based on pattern data from the Ripple Melody Sequencer and trigger inputs. Each has independent CV tuning and output.
(3) GATE OUTPUT MATRICES - Allow routing of internal modules to trigger/gate external modules.
(2) EXTERNAL INPUTS - Gate/clock/trigger inputs to allow external control of the internal modules.
(1) AMP LINK - For connecting to AMP "Expandoor" and "Wave Expander" expansion modules. Outputs the three gate outputs, the three melody control bits, and the central clock signal on a network cable.

OBLIQUENCER SPECIFICATIONS:

DIMENSIONS: 10" X 10" X 2.5"
DC INPUT 15V DC 1A 2.1MM CENTER POSITIVE
GATE/CLOCK INPUTS: 3.5MM, 3.5 TO 12V PEAK 0 - 10,000HZ POSITIVE EDGE TRIGGERED
GATE OUTPUTS: 3.5MM 10.5V DC PEAK UNIPOLAR
CV OUTPUTS: 3.5MM 0 - 5V CONTINUOUS, UNIPOLAR

www.melodyoracle.com