Overview video upload by SCHLAPPI ENGINEERING
"Eddy is a three channel stereo CV controlled mixer with sidechaineable compression and distortion, designed as a compact submixer. It also has normalized feedback paths for more experimental tone shaping, no input mixing, and percussion synthesis workflows.
The Cascade expander allows access to the individual VCA outputs for use as a triple stereo VCA as well as access to the feedback filter outputs and simultaneous clean, compressed, and distorted bus outputs for additional mixing and processing options."
00:00 Intro
01:02 Mixing/VCA basics
02:20 Sidechaining
02:50 Feedback and percussion patching
04:33 Gain amounts and headers
04:45 Cascade expander
06:00 Using as compressed drum submixer
09:16 Jamming hard
12:00 Jamming even harder
Eddy & Cascade - Triple stereo VCA and feedback machine
video upload by Stazma
"New Schlappi Engineering module alert!!!!
Welcome Eddy and it's expander, Cascade.
Eddy is a three channels stereo VCA and mixer, with normaled tuned feedback paths, mute and phase invertion switches, compressor and distortion modes and more.
The Cascade expander allows you to tap different outputs of the circuit individualy for parallel processing or feedback patches."
00:00 Intro
01:14 Hello Eddy
04:25 Eddy panel
05:51 Cascade panel
06:22 It's a drum module!
08:57 No input mixing
11:09 Patching with Cascade
14:37 Simple waveform mixing
18:18 Optional levels
19:20 Drum machine time
25:35 Breakbeat time!
30:30 End talk
Eddy is a three channel stereo CV controlled mixer with sidechaineable compression and distortion, designed as a compact submixer. It also has normalized feedback paths for more experimental tone shaping, no input mixing, and percussion synthesis workflows.
The Cascade expander is available seperately to allow access to the individual VCA or feedback channels and all mix options at once.
Features
3 stereo channels
Invert/mute switches for each channel
Built in VCA feedback compressor
Fourth input is switchable between a mono input or sidechain input
Aggressive distortion
Output switchable between distortion, compression, and clean mix on main module
Expander provides individual outputs for each output option
Normalized feedback through three bandpass filters allows for no input mixing and percussion synthesis
Individual outputs for each filter available on expander
Headers on back allow one channel of line level input
Trimmer on back allows for altering compressor threshold level
8HP for the main three channel stereo mixer module
4HP expander to use as triple stereo VCA
34mm depth (including cable)
current draw: +12V 146mA, -12V 146mA
The Cascade is an expander for Eddy that allows access to the individual VCA outputs for use as a triple stereo VCA as well as access to the feedback filter outputs and simultaneous clean, compressed, and distorted bus outputs for additional mixing and processing options.
It is passive and neither increases the current draw of Eddy or does anything without it.
Features
Individual outputs for each mix bus (Clean, compressed, and distorted)
Individual outputs for all three stereo VCA or feedback filter channels
4HP expander to use as triple stereo VCA
34mm depth (including cable)
current draw: N/A
No comments:
Post a Comment
Note: To reduce spam, comments for posts older than 7 days are not displayed until approved (usually same day).