MATRIXSYNTH: Neutral Labs


Showing posts with label Neutral Labs. Show all posts
Showing posts with label Neutral Labs. Show all posts

Wednesday, August 31, 2022

'Rachel's Song' - Piotr Garbaczonek Synth Cover feat. Yi Ming Sofyia Xue (Vangelis Tribute)


video upload by Piotr Garbaczonek

"Thanks for watching!
My second tribute to Vangelis's music comes to you in a form of a cover of one of my favorite compositions of his which is Rachel's Song from Blade Runner 1982. I am happy to also share that Yi Ming Sofyia Xue did the vocals for this cover.

Weibo: https://weibo.com/u/5619542279

Here are some links of mine:
https://linktr.ee/pgarbaczonek"

Wednesday, July 27, 2022

DIY Build #6: Neutral Labs Scrat V1.1


video upload by Piotr Garbaczonek

See here for additional details and a demo of the Scrat. "Thanks for watching!
More info about the module, and where to buy you can find with the link below:
https://neutral-labs.com/scrat


Time-Stamps from the Build:

0:00 - Intro
1:48 - Unboxing
5:17 - Diodes and Resistors
14:00 - IC Sockets
17:39 - Capacitors
22:05 - JFET Transistor
23:11 - More Capacitors
25:20 - Power Header
27:00 - J5 & J6
29:30 - Preset Card Slots
34:24 - D7 Diode
34:52 - Ins/Outs, Switches, Knobs
40:00 - Inserting the ICs
41:10 - Showing off Build
41:22 - Powering On
42:23 - Testing
47:47 - Ending
Here are some links of mine:
https://linktr.ee/pgarbaczonek
Go follow my Patreon here:
https://www.patreon.com/pgarbaczonek?..."

Friday, July 08, 2022

Neutral Labs Scrat customizable Steiner-Parker VCF Eurorack module demo


video upload by nyppy

"Available in July 2022 as DIY kit or prebuilt module. See https://neutral-labs.com/scrat

00:00 Intro
00:38 Resonance modes
01:02 Customization (LED)
01:42 Customization (LDR)
01:58 LDR madness
02:33 Preset cards"



Scrat is an aggressive sounding multimode Steiner-Parker filter with a twist: You can change the resonance flavour by plugging in components like diodes, capacitors or resistors (even LEDs and/or light-dependent resistors) directly to the front panel. A set of preset cartridges is also available, which gives you instant access to a variety of filter sounds. You could even make your own. Or go all in and connect some jumper wires to a breadboard for pretty much endless possibilities.

The 2-pole filter (12 dB/octave) supports both high-pass and low-pass mode. Even without external components or cartridges, the resonance behaviour can be changed in various ways via switches on the front panel. Both resonance and cutoff can be fully CV controlled, and the cutoff CV sensitivity can be adjusted as well.

The module contains an adjustable pre-filter drive circuit, which pairs very well with the Steiner-Parker design.

Scrat is available from July 2022 as a full DIY kit from retailers. It's a relatively easy build to complete, with a low component count and no SMD or other tricky parts. A set of 4 preset cards called Nuts (Acorn, Almond, Cashew and Pecan) is also available.

Sunday, April 03, 2022

Ambient Explorations pt.35 (Neutral Labs Elmyra) + Moog Subharmonicon and Mother-32


video upload by Piotr Garbaczonek

"Decided to make a little top-down shot video with no eurorack this time around. I was using the Neutral Labs Elmyra which I built a few weeks ago, as well as the Moog Subharmonicon for some chords, and the Moog Mother-32 for percussive melody. Hope y'all liked it:)

Here are some links of mine:
https://linktr.ee/pgarbaczonek
Go follow my Patreon here:
https://www.patreon.com/pgarbaczonek?..."

Wednesday, March 30, 2022

DIY Build #5: Neutral Labs Nermal Destructive Distortion Module


video upload by Piotr Garbaczonek

"In this video build Neutral Labs Nermal which is a great Destructive Distortion Module. Took me about 3 hours in total to build it, but I managed to condense the video down to a little under 30 minutes with some speaking points, and time-lapses in between. Hope this helps with your build!

Time Stamps:
00:00 Intro
00:53 Unboxing
03:32 Components
04:01 Resistors
08:08 Diodes
11:09 IC Sockets
13:31 Power and Capacitors
16:32 IC's
18:41 Heat Sync
21:01 LED, Knobs, Switches, Potentiometers
27:50 Final Results

Here are some links of mine:
https://linktr.ee/pgarbaczonek
Go follow my Patreon here:
https://www.patreon.com/pgarbaczonek?..."

Neutral Labs Nermal

Sunday, March 13, 2022

DIY Build #4: Neutral Labs Elmyra


video upload by Piotr Garbaczonek

"Built this organismic noise synth, based on the Lyra 8 by Soma Labs, in around 6 hours or so. Had some trouble during the middle, and kept forgetting to move the build to be in the frame, because I was so invested in not making a mistake on the build. It is not meant to be a guide on how to do it, because I'm not at that level yet, but I guess something for me to look at years from now, and see my growth. The background 'music' was made only on this synth, so it does end up working, and it sounds pretty damn good. I will use it in my ambient videos and some sound design projects.
Cheers!

- P.G."

Here are some links of mine:
https://linktr.ee/pgarbaczonek
Go follow my Patreon here:
https://www.patreon.com/pgarbaczonek?..."

Wednesday, March 09, 2022

DIY Build #3: Neutral Labs MEG Eurorack Waveshaper


video upload by Piotr Garbaczonek

Thanks for watching!
The Neutral Labs MEG kit finally arrived from Thonk from the UK and I was able to find some time and build it. It took me an hour and 47 minutes, and I captured the whole build but managed to condense the video down to 35 minutes. It has some skips and time-lapses, and some hair... I know, I am still getting used to shooting in this format, so I was getting close to the module a few times. Sorry about this. I will pay more attention in the future.
Find more information about the MEG here:
https://neutral-labs.com/meg

Here are some links of mine:
https://linktr.ee/pgarbaczonek
Go follow my Patreon here:
https://www.patreon.com/pgarbaczonek?..."

Saturday, February 26, 2022

Neutral Labs Meg unique waveshaper Eurorack module demo


video upload by nyppy

"Available in March 2022 as DIY kit or prebuilt module. See https://neutral-labs.com/meg"



"Meg is a unique kind of waveshaper. Instead of folding the wave back in on itself like a common wavefolder, it shifts parts of the wave up or down, with the shifting threshold being adjustable. The resulting 2 half-waves can be flattened one by one, essentially morphing into a half square wave and eventually a full square wave. Essentially, it will add pulse-width modulation (and more) to any kind of wave."

Saturday, February 19, 2022

Short improvisation on the Elmyra drone synthesizer


video upload by dystopiker

"The Elmyra is running through the following pedal chain:
EHX Superego (acting as a filter only) x TC Electronic Flashback 2 (analog delay) x EHX Epitome (octaver only) x EHX Cathedral (hall)."

Saturday, October 02, 2021

Neutral Labs Elmyra

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

You can find demos of the Elmyra in previous posts here.

Saturday, September 04, 2021

Neutral Labs Elmyra Desktop Drone Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.


via this auction

You can find demos in previous posts here.

Tuesday, July 27, 2021

Neutral Labs Elmyra Synthesizer in Black


Neutral Labs Elmyra Synthesizer Product Video upload by Finn Glink

You can find demos of the white model in previous posts here.

Thursday, May 27, 2021

Neutral Labs Nermal Eurorack DIY kit build video


video by nyppy

You can find additional info on Nermal posted here.

Saturday, May 15, 2021

Nermal Eurorack modulated destructive distortion module by Neutral Labs


video by nyppy

Neutral Labs Nermal Eurorack modulated destructive distortion Eurorack module demo

video by nyppy

Prototpy demo posted here



via Neutral Labs

Nermal is a destructive distortion Eurorack module that has some unique sonic qualities. There are 3 levels of distortion ranging from subtle saturation to utter destruction. An integrated modulator can switch or even blend between these modes, with the modulation frequency going well into the audio range, in which case, interesting harmonics and artefacts can be created on top of the incoming audio. Nermal rewards experimentation and unexpected sweetspots can often be discovered along the way. In addition to the onboard modulator, there are external modulation options via control voltages (CV) for the most commonly used parameters. LFOs and envelopes work great, but audio signals are accepted as well and make for the most interesting patches.

Nermal is available from May 2021 as a full DIY kit from retailers. It's fairly easy to complete, with a moderate component count and no SMD or other tricky parts.

Thursday, April 01, 2021

Neutral Labs Nermal prototype demo


video by nyppy

"This will soon be available as DIY kit, see https://neutral-labs.com​"

Monday, March 01, 2021

Dark Noisy & Glitchy Drone Texture with DIY Neutral Labs Elmyra Synthesizer (Feat Empress Zoia)


video by Sound Provider

"On this small demo I did an Ambient Drone with the Elmyra from Neutral Labs, the Elmyra is a quite noisy but fun and cheap Diy digital/analog hybrid drone synthesizer with a digital delay.

Elmyra is based on the Adafruit ItsyBitsy M0 Express microcontroller. Its 10-bit audio resolution already gives it a wonderfully gritty sound, and this circuit adds some nasty analog distortion to it.

For the video in addition to the delay included in the Synth, I also added a bit of reverb with the Zoia From Empress Effects , the patch I used is the "1978 plate A" from Christopher H. M. Jacques which you can download for free here if you have the Zoia : https://patchstorage.com/1978-plate-a...

Voila
Leonard de Leonard"

You can find additional Elmyra posts here.

Tuesday, November 24, 2020

Neutral Labs ELMYRA Review by Molten Music Technology


Molten Music Technology

"ELMYRA is a killer DIY drone synth based loosely on the SOMA Labs Lyra-8. It's full of noise and energy and here's my full review."

See the Neutral Labs label below for more.

Sunday, October 11, 2020

Neutral Labs Elmyra drone synthesizer through Collision Devices Black Hole Symmetry


nyppy

"You can easily build this synth yourself or buy an assembled unit, see here: https://neutral-labs.com/elmyra/"

Friday, September 04, 2020

Neutral Labs Elmyra Full Kit Unboxing


Elk Elektronik

"Very excited to receive a batch of Elmyra sound machines. These are the full kits. Let see what's in the box.
Elk Elektronik will be running some COVID-Safe DIY small group sessions with these. More info coming very soon."

Neutral Labs Elmyra synthesizer (a platform for sonic experimentation)


nyppy

"You can easily build this synth yourself or buy an assembled unit, see here: https://neutral-labs.com/elmyra/"

Elymyra
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH