Mixer as tone source

YouTube via IranContras. via Peter on Leisure Cove.
"An experiment using the EQ bands on a Behringer UB1202 as four fixed-tone oscillators in a feedback loop, with a Bleep Labs Thingamagoop phototheremin and Tapco 4400 reverb as the input sources."

KLAUS SCHULZE - FM DELIGHT (EDIT)

YouTube via MUSICTOMUSIC. via Nusonica.
"This is a shortcut version from this great instrumental song. the original song is normally over 17 minutes and was released on the EN=TRANCE album from 1988 !!! official website"

Dynacord ADD One Drum sampler

YouTube via buchla300

"A small example of what the ADD-One can do. The buttons I am pressing are the manual trigger buttons, but it can be triggered by pads, gates or midi. Each sample (12 bit 50khz) can be filtered (same filters as the Sequential Circuits Studio 440 btw) and modulated in many ways and can be repeated and re-triggered in various ways (hence the rhythmic patterns that play just by hitting one trigger)
Quite possibly the best drum sampler ever."

Buchla 200 Videos

YouTube via buchla300. via Nusonica.
Vid1: Buchla 200 Modular Synth
"Buchla 200 analogue modular in action The touch keyboard is working as one 16 note sequencer while the smaller 5 x 4 sequencer makes the other sequence.."
Vid2: Buchla 200
"Some more buchla. The chords are set up by the 5 x 4 sequencer which is just triggered from the 4 touch plates on the left. The sequence is one oscillator sequenced from the main touchpad."

ARP 2500 Modular Synth

YouTube via buchla300. via Nusonica.
"I was checking the ARP 2500, so decided to video whilst noodling. Will make something better later... AMAZING synth. Funky, fat, flexible."

Alesis Micron Sound Design

YouTube via Gtechture. via Nusonica.
"This is aprogram I created. It uses frequency modulation to create unique textures and the timbre is affected by the use of the pitch wheel." Things get more interesting when he uses the pitch wheel.

CME launches ASX for UF and VX series keyboards

"The ASX is a DSP board which goes into the expansion slot of UF and VX series keyboards and provides a flexible synthesis engine, turning the CME MIDI controller keyboard into a stand-alone synthesizer.

he ASX does not rely on playback of sampled sounds but brings sufficient DSP power to run dedicated synth modelling plug-ins. Four plug-ins are included with the ASX, which can be dynamically loaded one at a time: the Minimax - a polyphonic replica of the analog synth legend, the LightWave - a wavetable based virtual analog synth with plenty of modulation possibilities, the B4000 organ - a precise model of the famous tonewheel organ and the Vocodizer - a complex vocoder which is controlled via a dedicated microphone input.

Next to the microphone input, the ASX provides stereo line out, stereo headphone out and a USB port to connect to the ASX Editor Software. The Editor provides graphic interfaces to each plug-in and allows access to all settings of the plug-in. Sounds can be managed, exchanged via an online server and uploaded to the ASX hardware.

Listed at 369 USD, the ASX is shipping within November 2007."

[CME]

Synthesizer by *zorgitron

"I just got done building this bastard. The wooden case took 4 months to build. The metal front panel took 7 months to design. I went through about 20 - 30 different configurations and styles until I found one that would be useful in the long run as I add more things to it. The panel design was made with adobe illustrator, and printed out on seperate sheets. The sheets were photographed and gigantic negatives were produced. The negatives were used to burn the image into a silk screen. The emulsion was carefully washed out and I squeegeed the white ink onto the actual panel. This took 3 weeks. The electronics were a kit from PAiA, called the "Fatman" synthesizer. Building it took 3 months. I did it slowly so that I'd do it right. And that's about it. Now I will begin to add modifications. This synthesizer sounds wonderful.

2 Oscillators
12 db filter with ASR envelope
Voltage Controlled Amplifier with ADSR Envelope
MIDI control
18 knobs so far.
3 Blink lights"

click here for more info. Via Devient Synth.

de la Mancha basic 64

"basic64 is inspired by the 8 bit sounds of the classic Commodore 64. It's not a straight emulation, but is based around the SID chip with some extras for that 8-bit retro game sound, lofi gritty noises or just plain oddness




features
- 16, 8 or 6 bit sound quality
- 3 oscs, each with their own ADSR envelope
- oscillators can be sync'd and ring modulated by each other
- pitch envelope modulation
- pitch wobble option, for subtle instability
- 2 tempo-sync LFO's to modulate pitch, cut-off and pulse width
- LFO's have attack/release curves
- tempo-sync arpegiator
- flexible routing to state variable filter (LP, HP & BP)
- envelopes can be reset or continuous at retrigger
- monophonic or polyphonic option
- midi learn / midi CC support
- 128 presets by sinkmusic & WhiskeyPriest"
click here for more info and the download.
via CDM

firestARTer Prophet64 MIDI interface is ready

"The PROPHET64-CARTRIDGE EDITION MIDI-INTERFACE is a Midi-Box add on for your Commodore64 which makes it possible to control the PROPHET64-CARTRIDGE (Sequencer, Mono-Synthesizer, Bassline and Drummer) via MIDI."

More info on the firestARTer website and C64Music!