Roland JUPITER-8

via this auction

serial # 151346

CLICK FOR MORE »

Roland TR-808

via this auction

Serial # 041606

CLICK FOR MORE »

Roland RED SH-101

via this auction and this auction, one with and one without the leather shoulder strap.

Serial # 351439
Serial # 310292

CLICK FOR MORE »

Oberheim Xpander

via this auction

Serial # 700194

CLICK FOR MORE »

KORG MS-20 with Original Case

via this auction

Serial # 142557

see the seller's other items for more.

CLICK FOR MORE »

KORG MS-20 with Original Carry Bag and Clear Patch Panel Overlay

via this auction

Serial # 145968

CLICK FOR MORE »

KORG MS-10 with Original Carry Bag

via this auction

Serial # 133736

CLICK FOR MORE »

Sound Lab Analog Synthesizer MFOS Semi Modular

via these auctions. videos by laymamusic in the auctions captured here.

"This SoundLab is AC Powered and includes an AC adapter. Saves a bit of money and waste by not going through the batteries.

The SoundLab Synthesizer is a 100% analog 2 oscillator synth with mixer, filter (low pass/bandpass),LFO, AR Generator, VCA and volume/power knob. Also has audio input for processing external audio. SoundLab can be used alone or by the CV (1 volt per octave) and Gate inputs.

Measures 10x6x4 (in the videos my hands are close to the cam so it makes the SoundLab appear smaller than it really is)

Metal film resistors and high quality components used through out. Large Alpha 24mm pots for a nice smooth turning action. Circuit Board is mounted to case via aluminum stand-offs."

Catgirl Synth CGS37 CV Cluster

via this auction

"Assembled by Free State Custom Electronics

Here is a breif description of how this module works from Ken Stone's incredible Catgirl Synth Website:

"The CV cluster is an unusual kind of mixer. It takes two input voltages - a base control voltage, and a modulating control voltage, and creates the sum and differences of them. These different voltages are the base voltage offset in a positive direction by the modulating voltage and the base voltage offset in a negative direction by the modulating voltage. A series of equal taps between these two points results in outputs that always maintain the base control voltage at its full amplitude, mixed with a differing amount of the modulating voltage. The center output has equal amounts of positive and negative modulation canceling each other out, and thus behaves as a
straight-through connection for the base input.

Some ideas on how to use this module:

Feed your 1/v octave input into the base input, and an envelope generator, LFO, sequencer etc. into the modulation input. Connect the outputs, starting with the center unmodulated output, and working both up and down, to a series of VCOs. While the modulation input remains at zero, all of the VCOs will track. As the modulation voltage increases, the VCOs connected to modulated outputs will shift in frequency away from the base, at an amount proportional to its position from the center output. For example, a small modulation voltage will de-tune the oscillators slightly, fattening the sound. A modulation CV of 5 volts will set each output 1 volt apart, setting the oscillators an octave apart.

An envelope generator connected to the modulation input creates in interesting effect.

It of course can be used with audio frequency signals too, and may prove interesting when driving a cluster of wave multipliers or similar. Two audio signals fed to it could produce interesting stereo effects.

Note: The sum and differences produced by this module are voltage differences, NOT frequency differences. It is NOT a ring modulator."

- 20" MOTM Style Power Cable
- Runs on +/- 15 Volts (Power Supply Not Included)
- Fully Tested
- Hand Built and Internally Numbered
- If You Don't Understand What This Module Does You Might Need It Anyway :-)
- 4 Black Screws for Mounting to Wooden Cabinet, 4 Bolts for Mounting to MOTM 19" Rail Adapters or other 19" Rack
- Military Grade PVC Insulated Cable
- Professionally Designed and Manufactured PCB
- Military Grade RG-174 used on Audio Signals
- Military Grade PVC Insulated Cable used on CV Signals
- 1% Metal Film Resistors
- Gold Plated IC Sockets
- Switchcraft Jacks
- Bourns Sealed Conductive Plastic Pots
- Not Responsible For Your Probable Analog Synth Addiction
- Simply the Best of Everything
- 2 Years Parts and Labor Warranty (Void if Modified or Improper Power Supply Is Used)
- 7 Day Money Back Guarantee (Item Must Be In New Condition With All Original Packaging)
- Combined Shipping On Multiple Items"

SDC11084

flickr By drb3nway
(click for more)

drb3nway also brought us the Roland TR-808 and a chicken and the Polivoks bull.