via this auction
Perfect Circuit Audio (RSS)
Tuesday, August 14, 2012
Roland MC-202 Vintage Analog Synthesizer SN 339300
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)
via this auction
Perfect Circuit Audio (RSS)
Roland MC-202 Vintage Analog Synthesizer SN 339600
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio
via this auction
Perfect Circuit Audio
Roland RS-09 Organ/Strings SN 822069
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)
via this auction
Perfect Circuit Audio (RSS)
Syntecno TeeBee mkIII
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is a true analog 303 emulator, but with a few additional features of its own. It's a mono-synth, but it also has an external audio input, which allows you to run any outside sounds you want through it's 18 dB 2-pole filter. In addition to all the standard 303 style controls that you would expect, i.e., cut-off, resonance, envelope, decay, etc, it also adds a ring mod waveform for the oscillator with an adjustable ring detune amount. Everything on it is controllable through MIDI, and it is velocity sensitive. It has a built in portamento that emulates the 303 classic “slide” sound, and is activated simply by overlapping any of the MIDI notes you send to it. There is a very simple internal sequencer, but it's meant only for demo purposes. To make full use of this machine you need to hook it up to your favorite hardware or software based sequencer.
The Syntecno TeeBee mk III also has an extensive MIDI to CV capability. It has four separate CV and gate outputs which can all be controlled by MIDI. These outputs can be configured as either volts/octave or volts/hertz, and the gates can be ran as normal or inverted, giving you a lot of flexibility for controlling older, pre-MIDI gear. There is also a Roland DIN Sync output, for syncing up your older Roland boxes. There's also a simple MIDI merge circuit included, plus all of the TeeBee's controls transmit MIDI themselves.
This particular unit is in perfect condition. I am the original owner, and I bought it new from Syntecno back when the mk III was first released. It was used very lightly on the recording of a single album, and since then it has sat in a smoke-free home as part of a vintage synth collection. It has never been gigged with. Included is the original manual and power adapter. (Note: The power adapter included is designed for an input of 120V AC 60Hz and was supplied for use in the United States. If you live in a country with a different style power grid, you will need to provide your own adapter. As you can see in the pictures, the TeeBee requires an input of 12V DC 500mA center positive.)"
via this auction
"This is a true analog 303 emulator, but with a few additional features of its own. It's a mono-synth, but it also has an external audio input, which allows you to run any outside sounds you want through it's 18 dB 2-pole filter. In addition to all the standard 303 style controls that you would expect, i.e., cut-off, resonance, envelope, decay, etc, it also adds a ring mod waveform for the oscillator with an adjustable ring detune amount. Everything on it is controllable through MIDI, and it is velocity sensitive. It has a built in portamento that emulates the 303 classic “slide” sound, and is activated simply by overlapping any of the MIDI notes you send to it. There is a very simple internal sequencer, but it's meant only for demo purposes. To make full use of this machine you need to hook it up to your favorite hardware or software based sequencer.
The Syntecno TeeBee mk III also has an extensive MIDI to CV capability. It has four separate CV and gate outputs which can all be controlled by MIDI. These outputs can be configured as either volts/octave or volts/hertz, and the gates can be ran as normal or inverted, giving you a lot of flexibility for controlling older, pre-MIDI gear. There is also a Roland DIN Sync output, for syncing up your older Roland boxes. There's also a simple MIDI merge circuit included, plus all of the TeeBee's controls transmit MIDI themselves.
This particular unit is in perfect condition. I am the original owner, and I bought it new from Syntecno back when the mk III was first released. It was used very lightly on the recording of a single album, and since then it has sat in a smoke-free home as part of a vintage synth collection. It has never been gigged with. Included is the original manual and power adapter. (Note: The power adapter included is designed for an input of 120V AC 60Hz and was supplied for use in the United States. If you live in a country with a different style power grid, you will need to provide your own adapter. As you can see in the pictures, the TeeBee requires an input of 12V DC 500mA center positive.)"
Teisco S100P Preset Analogue Synth
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Some of the presets have a lovely smooth bottom end, that's very useable (This particular synth has been used on some records by a top producer in recent months) It has some pretty unusual features for an analogue monosynth, including aftertouch, and a built in spring reverb."
via this auction
"Some of the presets have a lovely smooth bottom end, that's very useable (This particular synth has been used on some records by a top producer in recent months) It has some pretty unusual features for an analogue monosynth, including aftertouch, and a built in spring reverb."
Kawai K3M with Novation Editor Template
Note: Auction links are affiliate links for which the site may be compensated.
YouTube Published on May 18, 2012 by tblv9300
"k3m and novation zero mkII"
SSM filters.
kawai k3m seq
Published on May 18, 2012 by tblv9300
"midi seq from Sugarbytes Consequence vst sent to the k3m. novation zero editor template"
via this auction
"Every parameter has it's own dedicated button which makes editing from the front panel possible but for those with one of the novation sl mkII line of controllers"
YouTube Published on May 18, 2012 by tblv9300
"k3m and novation zero mkII"
SSM filters.
kawai k3m seq
Published on May 18, 2012 by tblv9300
"midi seq from Sugarbytes Consequence vst sent to the k3m. novation zero editor template"
via this auction
"Every parameter has it's own dedicated button which makes editing from the front panel possible but for those with one of the novation sl mkII line of controllers"
RED SOUND DARKSTAR XP2 8 VOICE POLYPHONIC SYNTH W/ORIGINAL BOX
TC-11 iPad Improvs by Jeff McLeod
"Cthulhoid" TC-11 iPad improv by Jeff McLeod
YouTube Published on Aug 12, 2012 by mugwump1
iTunes:
TC-11 Multi-Touch Synthesizer - Bit Shape
iPads on eBay
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch Time Alive: LFO-0 Center
Touch Time Stationary: LFO-0 Rate
Touch Time Moving: LFO-0 Scale
Touch X Position: Oscillator B Frequency
Touch Y Position: Panning
Distance To First Touch: LPF Noise Frequency Cutoff
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude
LFO-0: Oscillatory A Frequency, Waveshaper Mix & Phaser Rate"
"Twitparse" TC-11 iPad improv by Jeff McLeod
Published on Aug 12, 2012 by mugwump1
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch X Position: Oscillator A Frequency & Oscillator B Frequency
Rotation Around First Touch: Panning, Reverb Time & Reverb Density
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude"
"Coldberg" TC-11 iPad improv by Jeff McLeod
YouTube Published on Aug 12, 2012 by mugwump1
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch Time Alive: AHDSR-0 Release
Touch X Position: Oscillator A Frequency & Resonator Delay Time
Touch Y Position: Panning
Touch Y Position When Created: AHDSR-0 Attack
Distance To First Touch: LPF Frequency Cutoff
Group Count: AHDSR-0 Decay
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude"
iTunes:
TC-11 Multi-Touch Synthesizer - Bit Shape
iPads on eBay
YouTube Published on Aug 12, 2012 by mugwump1
iTunes:
TC-11 Multi-Touch Synthesizer - Bit Shape
iPads on eBay
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch Time Alive: LFO-0 Center
Touch Time Stationary: LFO-0 Rate
Touch Time Moving: LFO-0 Scale
Touch X Position: Oscillator B Frequency
Touch Y Position: Panning
Distance To First Touch: LPF Noise Frequency Cutoff
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude
LFO-0: Oscillatory A Frequency, Waveshaper Mix & Phaser Rate"
"Twitparse" TC-11 iPad improv by Jeff McLeod
Published on Aug 12, 2012 by mugwump1
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch X Position: Oscillator A Frequency & Oscillator B Frequency
Rotation Around First Touch: Panning, Reverb Time & Reverb Density
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude"
"Coldberg" TC-11 iPad improv by Jeff McLeod
YouTube Published on Aug 12, 2012 by mugwump1
"Created using a custom-made patch on Bit Shape's TC-11 multi-touch synth for the iPad.
More info here: http://www.bitshapesoftware.com/instruments/tc-11/
And here: http://www.jeffmcleod.net
Patch controllers:
Touch Time Alive: AHDSR-0 Release
Touch X Position: Oscillator A Frequency & Resonator Delay Time
Touch Y Position: Panning
Touch Y Position When Created: AHDSR-0 Attack
Distance To First Touch: LPF Frequency Cutoff
Group Count: AHDSR-0 Decay
Touch Began: AHDSR-0 Start
Touch Ended: AHDSR-0 End
AHDSR-0: Amplitude"
iTunes:
TC-11 Multi-Touch Synthesizer - Bit Shape
iPads on eBay
Zorimba 2
YouTube Published on Aug 14, 2012 by Ebotronix
4ms Peg RCD
Analogue Systems 4xRS 110
Cyndustries 2x Thru Zero Oscillator
Doepfer A 143-1 ( Zo's Fm Index) A149-1
& A 134 pan by Moog MP 201 , Orgy & 2x Maths via 4x A 151
Make Noise 2x Maths 4xModdemix QMMG 2xWogglebug
Malekko 2x Unkle Oscillator ( Modulator's for ZO's FM)
Toppobrillo Sportmodulator 2xQuantimator
Serge VCS
SSL Orgy
Logic Master Clock Kenton Pro 2000 II
Drum Ultrabeat
~ 2x Wogglebug to
2x Quntimator to
A 185-2 to
2x TZO to
A133 & Intellijel ymod & both Zo's
to 4x RS 110
to QMMG
to 4x A 134
to Mackie Mixer
FX TC M3000 Boss VF 1 Line 6 Pro delay
Breakdown Stepped Multimode VC Filterbank
YouTube Published on Aug 14, 2012 by fonitronik
"A short demo of my now complete BSMVCFB in the context of the to-go rig.
The BSMVCFB provides 8 semstyle multimode filters, each with cutoff, resonnance, CV attenuation, pan (L/R), and mode controlls. A common controller board stepps the incoming audio through the filters, and sums the stereo ouputs - inspired by the Breakdown VSTi.
One additional audio input is directly routed to all 8 filters, making it a voltage controlled filter bank..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
