6-tier keyboard stand - Jaspers synthesizer instrument display stand rack

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

videos below.

"Every tier can be tilted to virtually any degree to allow for a comfortable playing position
The forks of every tier can be made to stick straight out or at an angle
The height of every tier can be adjusted
The depth of every fork can be adjusted
The horisontal position of both forks of every tier can be adjusted independently in case you want to put a small keyboard on some tier and you need them to come together a bit and you don't want to put a shelf on there like I've done.

Just make sure to tighten the screws once in a while depending on how much you re-adjust the tiers. I haven't had any problems with this stand since I got it and I've had some really bulky stuff on there like a Roland Jupiter-8, Roland Jupiter-6 and Yamaha DX7 mark 1, all of which weigh in at about 15-20 kgs.

The frame of the stand is made of aluminium and the sockets interconnecting the frame is made out of plastic. The dimensions of the stand is (H x L x D): 170 cm x 150 cm x 50 cm. For more info about the stands go to http://www.jaspers-alu.de/eng/index1.html and the bottom of this page in particular: http://www.jaspers-alu.de/eng/keyboards.html"

CLICK FOR MORE »

WEM WATKINS COPICAT IC400 Vari Speed

Note: links to listings are affiliate links for which the site may be compensated. via this auction

"Offered for sale here is one of the rarer and more sought-after models: the IC400 Vari Speed Copicat - complete with seventies 'space age' lettering: probably the most versatile of all the Copicats, with three echo replay heads and the all-important variable speed motor for accurate tempo-matched repeats (or crazy dive-bombing feedback dub effects).

It is in excellent working order and has just had an overhaul to ensure it's working as it should. It has an IEC socket fitted for 240v mains supply, the heads have been demagnetised and a new tape fitted. The case is quite scruffy (see photos below for details), but operationally it's a very good example indeed - appearances can be deceiving with these machines. This one sounds excellent: very inspiring to play. All knobs are crackle-free (some crackle may develop over time through lack of use - this is easily rectified by a few turns or in excessive cases, a squirt of Caig Deoxit switch cleaner).

The echoes are even in level/tone across all heads, and self-oscillate raucously when the sustain knob is turned up. The repeats have that pleasing analogue warmth that comes from tape and which sits so well behind whatever you're playing: this is not a crisp digital delay unit...

It has had a socket fitted for footswitch use which makes for a very studio-friendly unit: the footswitch socket carries the wet-only signal so it's perfect for use as an effects send when mixing, and great for dub-style feedback delays which sound wonderful - it's very easy to get lost creating hypnotic feedback rhythms when 'playing' this machine.

It comes with the original footswitch (a bit battered and missing the logo, but working fine).

It's fitted with a new WEM tape - because Copicats only use a short length of tape (compared to Echoplexes or Space Echoes) the tape should be changed regularly for optimum performance. We can supply quantities of tape loops if required. We use and supply both genuine WEM loops (still manufactured/supplied by Charlie Watkins) and loops from MyTape Echo..."

Roland TR-606 Drumatrix w/ Individual Outs MOD

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

See the seller's other items for more.

CLICK FOR MORE »

Yamaha CS-80 Legs/Stand & Carry Case/Giant Purse

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
helpshah on eBay (RSS)

Just lug the CS80 over your shoulder like a giant purse! Think of the fashion statement you could make!

ROLAND Juno-106 SN 393821

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
tokywax on eBay (RSS)

"There was a slight constant noise without playing a key when I turned the unit on, so I ran the unit in test mode. It seems like voice chips number 4 and 6 is not working properly and would probably need replacing. Other thing with this unit is that 5 white keys and 3 black keys seem to be not responding. They are 3C, 3C#, 3D, 3D#, 3E, 3F, 3F# and 3G.

Everything else should be working well to the best of my knowledge, all the buttons and sliders, as well as preset memories and writing function working fine."

CLICK FOR MORE »

ROLAND Juno-106 SN 393523

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

CLICK FOR MORE »

ROLAND RS-09 Organ/Strings SN 822153

Note: links to listings are affiliate links for which the site may be compensated.
via this auction
tokywax on eBay (RSS)

"This is the early version of RS-09 with rocker switches, which is said to be more reliable than the touch switches of the latter version.

The unit seems to be fully functional, all the keys and knobs and sliders working fine as I tested. There was a slight constant noise at the start when I turned the unit on, but eventually disappeared after playing for few minutes, probably could do with some simple adjusting/servicing."

CLICK FOR MORE »

Korg Synthesizer Poly Ensemble P Model K 4 SN 760066

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

via the seller: "I am not a music guy so I am listing this as is for repair, it fires up and seemed to work very well all the keys worked, sliders worked, and all knobs seemed to function. I do not have a cord for the pedal so I could not check it, shows some slight use and one key has a burn mark."

CLICK FOR MORE »

Korg Mono/Poly MG-4 Synthesizer SN 470525

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

via the seller: "This was purchased new in the early 80's and i am the original owner of this itim. This itim is in excellent condition visually with no fading, chipped or peeling wood panels or heavy scratches. itim is in perfect working condition all knobs and switches intact and every function works!!!!!!"

Squidfanny Alesis HR-16 Drum Machine Synthesizer [Circuit Bent]

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"The original 1989 Drum Machine has been beautifully Circuit Bent, Modded, Up-Graded with an integrated Analog Step-Sequencer & an additional CUSTOM ROM dedicated to the mighty AMEN BREAK....

The custom ROM contains a basic Amen Kit, chopped up loop fragments, Phat Analog beats, Analog Synth Effects & some TB-303 Acid Samples.

An arsenal of new knobs, switches & metal bolts allow these sounds can be Twisted, Disrupted & Manipulated with devious effect and with a high degree of hands-on live control.

This machine ALSO contains the ALESIS 'ELECTRONIC ROM' from the black version HR-16, with a switch to swap between the Alesis ROM and the custom AMEN BREAK ROM.
O.S. has been upgraded to the latest version too.

Buttons are all clean & responsive, LED lights have been replaced with modern LEDs in Purple, Blue & Green."

See the squidfanny label below for previous posts featuring video.

CLICK FOR MORE »