"Roland SH-09 monophonic analog synthesizer. Included with it is a basic MIDI to CV converter with a power supply, midi cable, and two patch cables. The synth is in fantastic condition with no functionality issues whatsoever. It is vintage so it does have some expected wear but nothing bad at all. This thing can create a wide range of sounds. From thick, rubber, sub-bass sounds to acid lines and smooth leads. Simple but versatile. It also has an external input so you can run drum loops or other synths through the filter. Definitley a good way to dirty up some soft synths too. The MIDI to CV converter does basic note-on, note-off and can be controlled with a computer or hardware sequencer that has midi out..."
Saturday, September 15, 2012
Roland SH-09 Analog Synthesizer with Midi to CV Converter
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Roland SH-09 monophonic analog synthesizer. Included with it is a basic MIDI to CV converter with a power supply, midi cable, and two patch cables. The synth is in fantastic condition with no functionality issues whatsoever. It is vintage so it does have some expected wear but nothing bad at all. This thing can create a wide range of sounds. From thick, rubber, sub-bass sounds to acid lines and smooth leads. Simple but versatile. It also has an external input so you can run drum loops or other synths through the filter. Definitley a good way to dirty up some soft synths too. The MIDI to CV converter does basic note-on, note-off and can be controlled with a computer or hardware sequencer that has midi out..."
"Roland SH-09 monophonic analog synthesizer. Included with it is a basic MIDI to CV converter with a power supply, midi cable, and two patch cables. The synth is in fantastic condition with no functionality issues whatsoever. It is vintage so it does have some expected wear but nothing bad at all. This thing can create a wide range of sounds. From thick, rubber, sub-bass sounds to acid lines and smooth leads. Simple but versatile. It also has an external input so you can run drum loops or other synths through the filter. Definitley a good way to dirty up some soft synths too. The MIDI to CV converter does basic note-on, note-off and can be controlled with a computer or hardware sequencer that has midi out..."
Yamaha CS-5, Roland TR-606 Demo by Jordan Passmore
YouTube Published on Sep 15, 2012 by Jordan Passmore
"Here is a demo of the Yamaha CS-5 analog monosynth and the Roland TR-606 analog drum machine. The Yamaha is being triggered via one of the trigger outs on the 606. The CS-5 has an envelope follower of sorts on it's audio in and that is what I ran the trigger into. Adjusting the gain on the audio-in allows for some odd timing on the pulses; it's a neat effect.
As you can hear in the video, the CS-5 excels at resonant sounds. The all-black CS synths are easily some of the cleanest sounding vintage synths; this sort of works against them in some ways as people seem to gravitate to the dirty or muffled ("organic", bleh) synths of that era. It's sound sits well next to a Roland synth of the same vintage, I think."
Synare Sensor Clone Analogue Drum Synth Demo
Note: Auction links are affiliate links for which the site may be compensated.
YouTube Published on Sep 15, 2012 by snolan1990
"This is a short demonstration of the sounds and features of the Synare Sensor clone kit as designed and retailed by eBay member helensson. I purchased this kit a few weeks ago, constructed the circuit board over a few hours one evening and then bodged together the wooden case over the following morning. At the time of writing this kit is still sold by helensson on eBay.
There are already a few demos of this very kit but I thought I would stick one up that demonstrates almost all of the sound possibilities of this unit with clean line in audio."
via this auction
"If you found this auction then I assume you know all about the Synare Sensor and the Synare 4 drum synthesizers. This is a direct clone of the Synare Sensor board .... Well...actually the original was single sided, where as this design is double sided with plated through holes....a much nicer design. This is true analog design...there are NO harsh square wave 555 timer chips here ..... no 4093...etc. All oscillations and modulations are produced by OpAmp circuits and The VCA section is built around the CA3080 OTA chip ..... for tried and true smooth analog synth tone!
In this kit I include the circuit board and all components needed to construct the module...I even include sockets for the ICs. The only things missing are knobs and a suitable enclosure. You may even want to get serious and use several of these kits to build a custom system. Also, the boards are small enough to install inside the shell of a small drum, just like the old Synare "UFO's".
As an option, the kit's potentiometers and power switch can easily be mounted off the board. This will allow you to use any existing or any custom enclosure desired.
All new quality components are used throughout the design and assembly instructions are included.
__________________________________________________________________________________________________________
Here is a link to a builders experience with a few photos of the board being assembled -
http://isistowers.blogspot.com/2010/11/percussive-synthesiser-mpc-part-1.html
This link (copy and paste) is to the DUB DISCUSSION BOARD... a blog of builders and users of this kit ! ......... come join the discussion!
http://www.interruptor.ch/Php5/dubboard/viewtopic.php?p=10693#10693
__________________________________________________________________________________________________________________________________________
The Synare Controls :
Tune - controls the pitch of the Oscillator
Freq - controls the speed/rate of the LFO wave that controls the pitch
Mod .- controls the depth of the LFO wave that controls the pitch
Decay - controls the length of the sound
Sweep - controls the range in which the oscillator sweeps
Vol . - controls the output volume
Included:
Double sided Circuit Board
Piezo sensor disk
Resistors
Capacitors
ICs
IC Sockets
Simicondoctors
Pots
Battery connector
Power Switch
Output Jack
Assembly Instructions
not included:
Enclosure
knobs
9V battery"
YouTube Published on Sep 15, 2012 by snolan1990
"This is a short demonstration of the sounds and features of the Synare Sensor clone kit as designed and retailed by eBay member helensson. I purchased this kit a few weeks ago, constructed the circuit board over a few hours one evening and then bodged together the wooden case over the following morning. At the time of writing this kit is still sold by helensson on eBay.
There are already a few demos of this very kit but I thought I would stick one up that demonstrates almost all of the sound possibilities of this unit with clean line in audio."
"If you found this auction then I assume you know all about the Synare Sensor and the Synare 4 drum synthesizers. This is a direct clone of the Synare Sensor board .... Well...actually the original was single sided, where as this design is double sided with plated through holes....a much nicer design. This is true analog design...there are NO harsh square wave 555 timer chips here ..... no 4093...etc. All oscillations and modulations are produced by OpAmp circuits and The VCA section is built around the CA3080 OTA chip ..... for tried and true smooth analog synth tone!
In this kit I include the circuit board and all components needed to construct the module...I even include sockets for the ICs. The only things missing are knobs and a suitable enclosure. You may even want to get serious and use several of these kits to build a custom system. Also, the boards are small enough to install inside the shell of a small drum, just like the old Synare "UFO's".
As an option, the kit's potentiometers and power switch can easily be mounted off the board. This will allow you to use any existing or any custom enclosure desired.
All new quality components are used throughout the design and assembly instructions are included.
__________________________________________________________________________________________________________
Here is a link to a builders experience with a few photos of the board being assembled -
http://isistowers.blogspot.com/2010/11/percussive-synthesiser-mpc-part-1.html
This link (copy and paste) is to the DUB DISCUSSION BOARD... a blog of builders and users of this kit ! ......... come join the discussion!
http://www.interruptor.ch/Php5/dubboard/viewtopic.php?p=10693#10693
__________________________________________________________________________________________________________________________________________
The Synare Controls :
Tune - controls the pitch of the Oscillator
Freq - controls the speed/rate of the LFO wave that controls the pitch
Mod .- controls the depth of the LFO wave that controls the pitch
Decay - controls the length of the sound
Sweep - controls the range in which the oscillator sweeps
Vol . - controls the output volume
Included:
Double sided Circuit Board
Piezo sensor disk
Resistors
Capacitors
ICs
IC Sockets
Simicondoctors
Pots
Battery connector
Power Switch
Output Jack
Assembly Instructions
not included:
Enclosure
knobs
9V battery"
Playing with my ARSEq
YouTube Published on Sep 15, 2012 by cirtcele
"Using the ARSEq to control two VCOs, two VCFs, a VCA and the 555 resonator on the nonlinearcircuits modular. Extra footage is from the PUBLIC DOMAIN movies 'Things to Come' and 'The Manster' - available for all to enjoy from archive.org"
CORON DS8 CLONE MODULAR VERSION ANALOG DRUM SYNTH ** TECBUG **
Note: Auction links are affiliate links for which the site may be compensated.
YouTube Published on Sep 15, 2012 by tecbugdemos
"This is a Euro version of the stand alone Coron DS8 clone analog drum synth"

via this auction
"This is a modular version of the standalone
Coron DS8 clone
It runs off 9v single supply
(even a 9v pp3 battery)
the PCB measures 106mm x 70mm
the panel measures 60.6mm x 128.5mm
fixing holes are 7.5mm from the side
and 3mm from the top/bottom
with a diameter of 3.2mm
comes with one jack lead 3.5mm"
YouTube Published on Sep 15, 2012 by tecbugdemos
"This is a Euro version of the stand alone Coron DS8 clone analog drum synth"
via this auction
"This is a modular version of the standalone
Coron DS8 clone
It runs off 9v single supply
(even a 9v pp3 battery)
the PCB measures 106mm x 70mm
the panel measures 60.6mm x 128.5mm
fixing holes are 7.5mm from the side
and 3mm from the top/bottom
with a diameter of 3.2mm
comes with one jack lead 3.5mm"
Moog Minimoog voyager analog synth performed by S4K
Moog Minimoog voyager analog synth performed by S4K ( Space4Keys Keyboard Solo )
YouTube Published on Sep 15, 2012 by Space4Keys
Moog Minimoog voyager analog synth performed by S4K ( Space4Keys Keyboard Solo )
http://www.space4keys.com
http://www.keyboardsolo.com
https://www.facebook.com/keyboardsolo
YouTube Published on Sep 15, 2012 by Space4Keys
Moog Minimoog voyager analog synth performed by S4K ( Space4Keys Keyboard Solo )
http://www.space4keys.com
http://www.keyboardsolo.com
https://www.facebook.com/keyboardsolo
Yuriko KEINO - gradually luxuriously (iYM2151 for iPad Demo song)
YouTube Published on Sep 15, 2012 by DETUNEltd
"Yuriko KEINO - gradually luxuriously (iYM2151 for iPad Demo song)
©2012 Yuriko KEINO
iYM2151 for iPad
iTunes Store
iYM2151 - DETUNE Ltd.
manual
http://www.detune.co.jp/iym2151.html
The world's first FM synthesis music workstation app,iYM2151.
80's game and computer sound is back!
YM2151, aka OPM is a single-chip FM synthesis implementation, an eight-channel four-operator sound chip. it was used in many 80's arcade games and home computers.iYM2151 is the The world's first FM synthesis music workstation app using YM2151 simulator engine for iApp.
[iYM2151 for iPad]
-uses YM2151 simulator engine for iApp
-4 operators per 8 Algorithms
-8 voices
-3 software LFOs
-max 99scenes (1scene with 64 steps)
-easy FM edit mode
-MML mode : programable huge FM parameters in every steps
-DUMP mode : realtime all FM operator parameters viewer
-song data file sharing and mail attachment
-good old days 80's design user interface
世界初、FM音源ミュージックワークステーションアプリ iYM2151。
Freitag
YouTube Published on Sep 14, 2012 by Ebotronix
Music starts at :27.
Flame Chord Machine V 1.01 with Chord Memory
4ms Peg RCD
Analogue Systems 4x RS 110
Doepfer A 132-3 A 149 A 143-1 & A 134 pan by Moog MP 201
Make Noise 2x Maths 2x Moddemix QMMG Wogglebug
Malekko 4x AO 4x Unkle
Flame Chord Machine 2x for Unkle's & AO's
chords by Roland System 104 & internal chord memory
Tiptop Audio Z 8000 for CM 2 arp transpose via A 156
Toppobrillo Sportmodulator
SSL Orgy
Logic Master Clock Kenton Pro 2000 II
Drums Ultrabeat
FX Boss VF1 Lexicon PCM 80 Line 6 Echopro TC M3000
ROLAND JUPITER 8【DEMO】
YouTube Uploaded by DIGITALSCREAMS on Oct 6, 2007
"Roland Jupiter 8 (12 bit version) - 1981 model - all sounds programmed and recorded by me.....some years ago.
I was an EQ novice back then...hence why this demo sounds a little sharp, cold, shrill...perhaps even metallic.
Make no mistake, the Jupiter is a lovely warm synth...."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH