Published on Apr 20, 2013 pieruixmaster .·30 videos
"The 8X4QSMA1 Quad 8b Analog Sequencer. There are 4 banks of 8 channels, fully separate from one another. Each bank has their own External Clock input, Internal Clock control, Gate, Trigger and Portamento CV Output. Bank A has an S-Trigger output. All output jacks are "Switchcraft (USA)" 1/4 inch.
Features of the Quad 8b Analog Sequencer/Controller:
There's a Clock Divider that will divide the clock input as high as X4096. Send the Clock signal into the Ext/Clk input on the Sequencer. You may select the divisions marked on the selector switch. (Gray/White) Control knob. The divisions are: X,X/2,X/4,X8,X16,X32,X64,X128,X256,X1024,X2048 and X4096. The sequencer will also send that clock signal (selectable on all 4 banks) to operate any or all the banks clock.
Each bank has 12 selectable clock control settings. The first 4 selections will allow you to use any of the banks individual clocks. Each bank has their own manual clock control. The 12 settings for each bank will let you set the clock (for that bank) control: Example: If you want to have Bank A's clock control Bank C at the same time, you'd set the Clock selector from Bank C to run off of Bank A on the selector switch. If you want to have Bank A's clock from Bank's B,C & D, you select A on their Clock selector switch. Now Bank A's manual Clock control will now control all four banks. In sync with each other. There is a Master Reset on the "Off/On/Reset" switch. When pushed up (momentary) it will reset the complete system.
All voltage outputs are Low to High, (Except for the S-Trig, that is High to Low). Master voltage can be selected to be a 5 Volt system or a 12 Volt system. The CV/Output will now put out 0 to 5.45 Volts DC or 0 to 11.50 Volts DC. 12 Volt power adapter is included. For European voltages you will need an adapter to change from 240Vac to 120Vac.
PULSE DELAY CONTROL