DEEP BASS & other Sounds of YAMAHA CS10

Published on Jun 16, 2013 LESINDES·94 videos

"Awesome Yamaha CS10 Synthesizer
Some Soundengine as the legendary CS80 = 1/2 voice of the legend
Short Demo of Yamaha CS10 sound capabilities
Huge bass sounds"

YAMAHA CS10s on eBay

[DEMO] Dynacord TAM21 Analog Flanger + Elektron Machinedrum UW

Published on Jun 6, 2013 LESINDES·94 videos

"WORLD DYNACORD DAY, June, 6th
Dynacord TAM21 Flanger/Feedback Delay ANALOG + Elektron Machinedrum UW"

[DEMO] Dynacord Vocoder SRV-66 = Synton Syntovox 222

Published on Jun 6, 2013 LESINDES·94 videos

"The Dynacord SRV-66 Vocoder is a liscensed clone of the SYNTOVOX 222 made by the legendary Dutch company Synton. It is also labelled ECHOLETTE SEV-66. All the three vocoders are identical.
They have 20 bands (10 for analysis and 10 for synthesis) and a voiced-unvoiced detector. The comprehensibility of speech is very good.
Is to be used very easily and intuitively.
The sound is much better than that of its peers: Korg VC-10 and Roland SVC-350.
The recordings were made with SHURE SM58 or MACHINEDRUM UW-2 fed in the SPEECH inputs and SIEL ORCHESTRA 2 as the carrier. So the basic signal is all SRV-66 -- no mixer is involved!"

SND FB14 Extended Range Filterbank with Clavia Nordlead Arpeggios & Drones

SND FB14 -- Clavia Nordlead Arpeggios

Published on Feb 6, 2013

"SND FB-14
Extended Range Filterbank"

SND FB14 -- Clavia Nordlead Drones

Published on Feb 9, 2013 LESINDES·94 videos

Also see SND FB14 -- Part 3 -- Vermona ER-9 in this post.

[DEMO] Yamaha SK-20 -- Symphonic Ensemble -- pure without external FX!

Published on Jan 21, 2013 LESINDES·94 videos

"String Machine, Synthesizer, Organ

This is 100% the pure unlayered SK20 without any external FX!"

Waldorf Microwave Live Tweaking w Access Controller

Video just added to this post.

Vermona DRM1 Mk.III & ER-9 Videos by LESINDES

[DEMO] Klarkteknik DN50 + Drums (Vermona DRM1 Mk.III analogue drums & Elektron Octatrack)

Published on Jan 10, 2013 LESINDES·94 videos

"YouTube member joyoussound was wondering what the fabulous KLARKTEKNIK DN50 spring reverb sounds like when treated with drum beats. So the answer is right here in the video.
What you can hear is that the unit is doing a very good job. Since there are limiters that attenuate harsh transients in the unit itself before the signal is led to the springs."

[Demo] Vermona ER9 Beatbox + Klarkteknik DN50 Spring Reverb

Published on Feb 7, 2013

"Modded Vermona ER9 Beatbox"

[TESTING] Vermona ER-9 + z.vex Ooh Wah 2 + z.vex Fuzz Factory

Published on Feb 4, 2013

"Vermona Er-9"

SND FB14 -- Part 3 -- Vermona ER-9

Published on Feb 10, 2013 LESINDES·94 videos

SND Parts 1 & 2 in this post.

2 Minis -- Arturia Origin Minimoog vs. Studio Electronics Midimini -- Model vs. Reality

Published on Dec 7, 2012 LESINDES·94 videos

"Waht do you need: A synth or canned laughter?

The SE Midimini is a 1-to-1-clone of the Minimoog at its time withe the components that are used also in the legendary Minimoog."

Arturia Origins on eBay

Minibrute Demo Videos by LESINDES

Published on Nov 6, 2012 LESINDES·94 videos

"The Arturia Minibrute is a very handy analogue synth. At the same time it is USB/MIDI-CV/Gate Interface, (all directions as far as I found out). And it is also a CV/Gate-Keyboard which is very rare.
The built quality is so so. Could be better -- especially the pots and knobs also the waveform sliders with a quarter of the way up you obtain 50 percent of the volume the last 25 percent of the way make almost no difference in loudness. But I don't know if there is a cheaper way of assembling and selling this synth.

The oscillator + its waveforms
Lopass, bandpass, hipass, notch filter
Resonance
Envelopes
Arpeggiator
Glide
Brute Factor
Lfo
Supersaw"

Playlist:

Happy Birthday w Minibrute

[DEMO] Arturia Minibrute -- 1

Arturia Minibrute -- Arpeggio - Published on Jan 13, 2013
Only one arpeggio running through the whole session. Tweaking knobs + the gorgeous DP/Pro reverb algorithm by Ensoniq.

[DEMO] Ibanez UE-305 + Arturia Minibrute

Minibrutes on eBay

[DEMO] Tube VCA -- Röhren VCA

Published on Sep 27, 2012

"A Tube VCA made in Cologne. Very nice sound tool. From decent or harsh."

Guessing this is from the same maker as the Rohrengrab Tube Based Synth.