Note: Auction links are affiliate links for which the site may be compensated.
via
this auction
"One-stop shop for all your utility needs!
The Manual Voltage Processor (MVP) is a multi-function module with several vital "basic-utility" functions all packed onto one panel. This module is an ideal one-stop solution for manually mixing, scaling, inverting, distributing and offsetting audio and/or control voltage signals.
This module consists of three basic sections:
Attenuverter/Offset: First is the attenuverter/offset section at the top. Each of the 3 independent attenuators is bipolar and will output a static +/-5v DC voltage (offset) with nothing plugged into its input jack. The corresponding LED will indicate your signal's strength and polarity. (Red = positive.)
Mixer: Second is the mixer section in the middle. It's set up as as a basic unipolar 4-input unity-gain mixer. The sum of channels 1 & 2 can be removed from the main output by inserting a cable into the jack labelled "1+2", allowing you to use this section as two independent 2-input mixers. The output jacks are marked with black square surrounds. This mixer is designed to handle primarily audio and uses the same op-amps as the mix. It'll handle CVs quite happly, but the inputs aren't matched and you may not get good results with critical signals such as pitch CV.
Multiples: Finally there is the multiples section across the bottom. On the left are two 1->2 buffered mults and on the right are two 1->3 passive mults. The input jack for each section is marked with a black circular surround. The arrows on the panel indicate internal connections between sections. With only buffered input a in use you can distribute a signal to as many as 10 different destinations.
Like all Manhattan Analog modules, the MVP is entirely hand-built using panel-mounted metal-shaft pots and is fully protected from reverse-power accidents.
Features
3 Bi-polar Attenuverter/Offsets
4 Input Mixer or Two Independent 2 Input Mixers
Two Buffered Multiples
Two Passive Multiples"