DPO + LxD meets Zdsp

Published on Nov 15, 2015 SunFallsMusic

"*Line Audio for that low end :)
Messing about with the new MakeNoise Music LxD aka "Low Strike Duo" module, it's buried in there under the cable madness.
TipTop Audio Circadian Rhythms (CR) at the helm. Only 2 sounds sources here.. and lots of modulation, but the heart of the patch is:
-MakeNoise DPO's Final and Saw patched into LxD's 2 inputs, which is being cv'd by Tides and CR triggering the Strike input.
-Blue Lantern Asteroid BDv4 as kick.
-Zdsp's on madFx"

Paia 2700/4700 Modular Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This Paia modular synthesizer has 16 modules and a keyboard. It contains both 2700 and 4700 modules. Everything seems to be working well, but could use a good cleaning. It also comes with 8 voltage cables.

List of modules

2700
power supply
Voltage Controlled Oscillator
Function Generator
Control Oscillator
voltage control amplifier X2
bandpass filter X2
lowpass filter
inverted buffer

4700
4770 power X2
4740 Envelope Generator
4761 multiplier
4720 Voltage Controlled Oscillator
4710 Balanced Modulator"

CLICK FOR MORE »

#lsb_TV error instruments vs bastl instruments feat kasia justka, gijs gieskes & daniel katzenstab

New video added to this post.

Moog Mother-32 (x3), Octatrack, Blofeld, OP-1

Just trying out ideas for an upcoming performance; Moog Mother-32 (x3), Octatrack, Blofeld, OP-1

Published on Nov 15, 2015 Genshi Media Group

"This is just a really rough test; trying out ideas for my upcoming performance for the Volt Divers Experimental Electronic Music Collective. Just seeing what sounds go good together, how the sync works between the Octatrack and the Moog Mother-32s, etc. I am NOT at all happy with the way this came out, but I thought I'd put it here to compare with the actual performance which is in five days of this posting!"

Happy Nerding

Not a new module but I realize I never captured a proper image of it, nor the specs.  Love the dual tuning knob.

via Happy Nerding:

"HM VCHM VCO_75O (Hearn Morley Voltage Controlled Oscillator) is an analog VCO made to give classic four waveforms (sawtooth, pulse, triangle and sine) in a narrow 6HP width. It features counting 10-turn “Tune” knob, where each turn corresponds to 1 octave of frequency range. Thus manual frequency sweep range is 10 octaves: staring from 16 Hz and up to 16 kHz, and this single “Tune” knob covers duties of the commonly used separate “Coarse” and “Fine” tune knobs. The saved panels space is then used by “FM” knob, which provides exponential Frequency Modulation, taking the Modulator’s signal from the corresponding “FM” jack. There is no linear FM present, because we highly recommend to use our FM AID module, which perfectly couples with HM VCO to give the user many different flavors of linear frequency/phase modulations. The “Tune” dial has a handy lock, so you can lock in the knob from accidental moves and keep the exact frequency setting unchanged.

There are also:
– standard “1V/oct” input jack for over than 7 octaves of perfect tracking;
– “Sync” input for hard syncing to the Master ocsillator;
– “PWM” input for Pulse Width Modulation.

SPECIFICATIONS

Tune: 16 Hz … 16 kHz

outputs level: -5 … 5 V

outputs impedance: 1 kOhm

module depth: 5 cm or 2 inches

power consumption: +46 mA / -46 mA at +/-12 Vdc

MSRP: 220 USD"

Retro Super Sawtor

Published on Nov 15, 2015 Happy Nerding

"Two Super Sawtors are used to play covers of 70's-80's hits.
BASS signal pass: HM VCO-Super Sawtor-MMM VCF-ADSR for filter and VCA.
LEAD signal pass: HM VCO-Super Sawtor-ADSR for VCA.
No external processing except of delay and reverb are used."

MFB Nanozwerg Analogue Synthesizer SN 1863

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Buchla Blade 20hp test

Published on Nov 15, 2015 Todd Barton

"The new Buchla Blade eurorack adapter for the 200e system. A simple test with the Makenoise Echophon."

Oberheim Xpander Vintage Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Alternate Front Panel for Cwejman CTG-VC Eurorack Synthesizer Module

via this auction

"Custom made gray/green front panel for Cwejman CTG-VC. Industrially silkscreened and powdercoated with the same exact techniques and colors that Cwejman uses for a perfect aesthetic match with older Cwejman modules. CTG-VC module not included (obviously). Panel replacement is easily done in minutes with simple tools, no electronics work required. Ships worldwide within 24h of payment. Visit the Grayscale website for more Eurorack alternate front panels."

CLICK FOR MORE »