Monday, November 09, 2020
Modular Nights Eurorack Performance ~ No cure for Electronica
EZBOT
"In this video I share the modular segment (1/3 segments) of my (prerecorded) performance for Modular Nights on November 7th.
If you want more and feel inspired to support me, please visit my Patreon page: https://www.patreon.com/ezbot
https://www.ezbot.live/
https://soundcloud.com/ezbotmusic
https://www.modbang.com/"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: eurorack, MATRIXSYNTH Members
LABELS/MORE: eurorack, MATRIXSYNTH Members
Serge 73-75 Voice And Control
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"This is a 73-75 Serge system with 2 panels, the Voice and the Control. Both were put together from the eDIY sets that were offered at the end of the year in 2019. In addition, LEDs were added to 2 of the slews, the envelope, and the SSG modules. This makes a big difference when using, as it provides feedback. The 2 open holes in the control panel were fitted with toggle switches on the negative slews, so you can make them cycle. Both panels have been calibrated.
Both hammond boats are connected together by 4 screws inside, as well as a rubber grommet that provides a channel between the 2 for the power to be distributed. The panels were fitted with potentiometers and then wired to the boards, which took a lot longer, but this gives you flexibility if you want to do future modifications. In fact, I'd recommend someone diy friendly buy this if they'd want to add more toggle switches, LEDs, etc. The PSU is a frequency central power unit that has a +6 volt regulator, needed for this Serge design. Jameco AC adapter included to power both panels.
Cosmetically, this is listed as 'very good' since there is a little bit of rash under the mounting screws and a few small marks here and there.
Comes with a bunch of banana cables from modular addict of varying color and length."
via this auction
"This is a 73-75 Serge system with 2 panels, the Voice and the Control. Both were put together from the eDIY sets that were offered at the end of the year in 2019. In addition, LEDs were added to 2 of the slews, the envelope, and the SSG modules. This makes a big difference when using, as it provides feedback. The 2 open holes in the control panel were fitted with toggle switches on the negative slews, so you can make them cycle. Both panels have been calibrated.Both hammond boats are connected together by 4 screws inside, as well as a rubber grommet that provides a channel between the 2 for the power to be distributed. The panels were fitted with potentiometers and then wired to the boards, which took a lot longer, but this gives you flexibility if you want to do future modifications. In fact, I'd recommend someone diy friendly buy this if they'd want to add more toggle switches, LEDs, etc. The PSU is a frequency central power unit that has a +6 volt regulator, needed for this Serge design. Jameco AC adapter included to power both panels.
Cosmetically, this is listed as 'very good' since there is a little bit of rash under the mounting screws and a few small marks here and there.
Comes with a bunch of banana cables from modular addict of varying color and length."
YAMAHA CS30 Monophonic Synthesizer w/ Case
Roland TB-303 Bass Line Synthesizer with Original Case & Decksaver Cover SN 253500
AKAI MFC42 MFC-42 Analog Filter Module
AKAI VX-600 polyphonic synthesizer
Eric Synths Techno System
biologik
"A quick jam with the Erica Synths Techno System.
System modified to remove Link and dual drive. Replaced with pico trigg, pico drums, and doepfer a-138s stereo mixer."
Novation Summit (Ambient / Drone)
Tom Noise
"Just spontaneaously noodling around with a selfmade patch. Blending in some filter fm by mod wheel, Just a single patch of the novation summit without external fx."
Evolator Dave Smith Evolver Demo
Tom Noise
"Synthesizerdemo made with an DSI Evolver. Recorded and mixed in Logic Pro X. No EQs or additional FX used, every sound was made with the Evolver."
Roland SH09 Synthesizer Demo Synthpop
Tom Noise
"A synthpop track made with a Roland SH-09 only. 21 tracks, recorded an mixed in Logic Pro X."
Roland SH09 Demo "Synthesizer 09"
Tom Noise
"Made with a Roland SH-09 only. Mixed in Logic Pro, no EQ. A bit of Delay by Waves H-Delay and Reverb by Valhalla Vintage Verb."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH




























