MATRIXSYNTH: Search results for bubblesoundmodular


Showing posts sorted by date for query bubblesoundmodular. Sort by relevance Show all posts
Showing posts sorted by date for query bubblesoundmodular. Sort by relevance Show all posts

Monday, January 01, 2024

New Bubblesound SpringVerb Demos


SpringVerb606 video upload by bubblesoundmodular

https://www.bubblesound-instruments.com

"The TR606 meets the SpringVerb. the 606 is going through a Booster module and into the SpringVerb. The Frequency Central Berlin School sequencer is providing the CV for the filter cutoff of the SpringVerb."

bass1


"The VCOb is going into the 141 and then into the SpringVerb. Sequencing from a TB03 and modulation from the Frequency Central Berlin School."

bass2

video upload by

"VCOb into the 141 and off to the SpringVerb. This is a drone, the Frequency Central Berlin School is sequencing the filter of the SpringVerb"

high1

video upload by

"VCOb into the 141 and then to the SpringVerb. The Frequency Central Berlin School is sequencing the VCOb."

https://www.bubblesound-instruments.com

Friday, May 05, 2023

Bubblesound SpringVerb Demos


video upload by bubblesoundmodular

"The TR606 kick is going into the bubblesound Booster and then into the SpringVerb. The noise is thanks to a very old Mackie 1604. Starts in Low Pass, then Band and finishes in High Pass. more of a test than a demo"

SPRVB2 780 VCO


"Another test of the SpringVerb. This has the VCOb going into the 141 and then the SpringVerb. simple 2 note sequence. starts in Low Pass, then Band and into High Pass. actual demos coming, this is just a test."

Sunday, February 03, 2019

Sequence 01


Published on Feb 3, 2019 bubblesoundmodular

Wednesday, September 02, 2015

bubbleACID


Published on Sep 2, 2015 bubblesoundmodular's channel

"shaky demo video of the dual SeM20 with 2 VCOb oscillators, a uLFO, VCA4p and dlADSR"

Sunday, December 14, 2014

sunday bubble


Published on Dec 14, 2014 bubblesoundmodular's channel

"full bubblesound voice, VCOb into a VCA4p, 2 dlpADSRs, a uLFo and a dual SeM20. SnazzyFX Wow and Flutter helping out."

Wednesday, November 26, 2014

dualSeM20DRUMS


Published on Nov 26, 2014 bubblesoundmodular's channel

"a drum patch made up of the dual SeM20, the uLFO, a dual looping ADSR, the VCA4p and a PEG. delay from an old Ibanez 1100."

Saturday, November 22, 2014

bubblesound dualSeM20


Published on Nov 22, 2014 bubblesoundmodular's channel

"VCOb Saw and Pulse going into the dual SeM20. CV from the dlADSR and the 4ms PEG.
sorry for the audio/video quality. a new camera is at the top of my to do list. and it's kind of awkward to demo modules without faceplates."

Friday, October 10, 2014

bubbleosund Introduces New Dual ADSR Eurorack Module Based on Roland M-140 & SH-101


Published on Oct 10, 2014 bubblesoundmodular's channel

"The first demo of bubblesound's dual ADSR. A VCOb and uLFO being sequenced from X0Xbox. The gate is going into the dADSR, the 4ms PEG and the Rotating Clock Divider and Multiplier. 1 VCA4p acting as a mixer for the 2 oscillators, mix out into channel 4 of the VCA, dADSR going into the CV for channel 4, out to the SeM20 and back into a second VCA4p. High Pass out from the SeM20 into the Wow and Flutter which goes into the second VCA. mix out to a speaker. The 4ms modules are doing clock multiplication and division for the FMing and for the gate of the dADSR."

"The dADSR is clone of the Roland M-140 module, and are very similar to those in the SH-101. As a transistor based EG, it's very responsive and snappy. The perfect companion to the VCA4p.

In addition there are 2 LFOs acting as clocks, one for each EG. There are 2 LFO outs per EG, a Triangle and a Square. The LFO operates independently from the Gate, so when using an external Gate to drive the EGs there is still an LFO available. The Inverted Gate outputs are just what they sound like, an inverted version of whatever is coming into the Gate input, either the internal Square wave or an external Gate.

The Output section has the standard 0-8V and inverted outputs of most EGs, but there is also a +-5V out for modules that accept bi-polar modulation like the SeM20. These are also good for FMing VCOs and anything else you
might use an LFO for. The Mix section is simply that; the two normal, inverted and +-5V outs get mixed for more complex envelopes.

With 2 EGs, 2 LFOs with 2 outs each and 9 Envelope outputs this is the most versatile and dense analog EG out there.

Width - 16HP
Depth - 40MM

LFO range - 15 Seconds - 300Hz

EG Specs
Attack - 1.5MS - 4 seconds
Decay - 4MS - 12 seconds
Sustain - 0-10V
Release - 4MS - 12 seconds"

Tuesday, October 01, 2013

bubblesound VCA4p Scope & Panel Videos

Published on Oct 1, 2013 bubblesoundmodular·11 videos

"The 4ms PEG is controlling the bubblesound VCA4p. for the first minute the VCA4p is set to Linear response. the second minute or so is the VCA4p in Expo mode."

panel
Published on Oct 1, 2013

"the PEG controlling the VCA4p. it a tight fit with lots of cables plugged in, but manageable."

Tuesday, August 13, 2013

New bubblesound VCA4p


VCAmixTEST Published on Aug 13, 2013 bubblesoundmodular·9 videos

Update: more info in via bubblesound directly:

"bubblesound instruments is happy to announce our newest module, the VCA4p.

This is a classic OTA based VCA, very similar to the ones found in ARP, Serge and Polyfusion synthesizers in the 1970's.

While this is a classic design modern components keep the noise to a minimum with out turning this into a super clean and characterless VCA.

There are 4 independent VCAs. A panel mounted switch lets the user chose Linear or Exponential CV response for each VCA. And jumpers on the control PCB let the user control when the signal is passed to the mix out section. With the jumpers in place the output of each VCA will go to the individual outs as well as to the mixers at all times. With the Jumpers removed the output going to the mixer will be cut off when the user plugs into the individual out.

We are finishing up the final PCB revision right now and expect the VCA4p to begin shipping the third week of September.

The VCA4p is 8HP. Retail price is $225.00"

Discussion on Muff's here.

Tuesday, April 16, 2013

Bubblesound f1-11 Filter Prototype Video

Published on Apr 16, 2013 bubblesoundmodular·8 videos

"new(4/13) bubblesound filter prototype. Low Pass, then Band Pass then High Pass and back to Low Pass. 3 VCOb oscillators into a lo-gain mixer. 4ms PEG and Matrix VCA round out the modules used."

Sunday, July 10, 2011

bubblesound Modular Videos


YouTube by bubblesoundmodular

Playlist:
VCOb 1
bubblesoundLFO sine shaper
LFO sync'd
LvL+rm
SeM20demo1May2010
Zi6_0815.MOV - "3 VCOb's all FMing each other."
VCOb demo#2.MOV - "2 VCOb's tracking together, lots of FMing and a run through of the outputs."
HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH