ReBach Eurorack Module Demos

Published on Sep 24, 2018 ReBach

Playlist:

1. ReBach CATCH VCF A II

CATCH Series VCF-A Demo II
2-pole Eurorack Voltage Controlled Filter with extreme Resonance !

The CATCH VCF-A is a strong filter with a high resonance, extreme self-oscillation but widely applicable. Beautiful bass lines but also raw acid-sounds or FX. Be careful on your speakers and ears due to the high feedback!!

Catch the sound with the ReBach CATCH series!

www.rebach.eu

CLICK FOR MORE »

Rebach-VCO-A CATCH and VCO GR11 Sub out in music

Published on May 18, 2019 Dziam Bass

"Today I have a small movie showing very nice sound from ReBach modules.
there are VCO-A and VCO GR11 two oscillators connected here.
VCO GR 11 is based on the Saw Core so Sub of GR 11 adds a powerful character creating a very nice thick sound, I also used the VC Octave Switch MSK008 -North Coast Synthsesis to raise the octave up and down to show how nicely the VCO behaves in lower and higher octaves.
Definitely Rebach puts on simple modules but also on great sound that can be easily obtained with these modules.
for this I also used the VCF-A and ADSR-A filter from Rebach in the whole voice.
Melody and beat make on Nerdseq -Xor Electronics
More information about these modules here: https://rebach.eu
Have a nice day synth guys!!!"

Rebach VCO GR11 & VCF-A Catch filter unboxing demo & first sound

Published on Sep 21, 2018 Dziam Bass

Note this is the first post to feature Rebach. We have a new maker in time.

"It's time for unboxing video and first sound.

We like to make these films and create new sequences and sounds, and this time the Dutch ReBach is at the workshop.
We only have an oscillator with a filter in a simple sequence and later add some delay for more space but check it yourself !!!

VCO GR11 and the second newest VCF-A Catch series product!"

via https://rebach.eu

VCO GR11 to Voltage Controlled Oscillator is a simple but powerfull SAW core oscillator tuned for bass applications, also applicable as semi-LFO. The GR11 VCO generates four waveforms (SAW / SQUARE with PWM / TRI / SUB SQUARE). The GR11 has a unique Sub section which generates a square waveform that can be adjusted in four parts. Extremely well applicable for bass! Use it as LFO or even as simple voltage / frequency controlled. 4-step sequencer or modulate a second GR11 for a wide range of deep sounds or FX. The new VCF-A from the CATCH series is the basic Eurorack series with minimal functions, but with maximum sound! This VCF-A is characterized by extreme resonance (self-oscillation) for violent sounds. a real speaker killer so we were careful with this resonance."

CLICK FOR MORE »

ReBach CATCH Music demo

Published on Dec 10, 2018 ReBach

"ReBach Catch series music demo

Short impression of the CATCH series. Two independent CV signals to three VCO, two ADSRs and two VCFs. Applied are PWM and FM modulation."

ReBach CATCH LFO B Demo

Published on Nov 15, 2018 ReBach

"ReBach CATCH LFO-B demo

This LFO contains two oscillators. The second oscillator modulates the first. This LFO-B has a TRI output and PULSE output.
In this short demo an example of the nice effects. With the LFO-B in this example we modulate the VCO frequency, the VCF cutoff and the VCO PWM.

Used other equipment is: CATCH VCF-A / CATCH VCO-A / CATCH ATN-A"

ReBach CATCH ACID

Published on Nov 16, 2018 ReBach

"ReBach CATCH series ACID style demo.

With the VCO-A, LFO-B, ADSR-A and VCF-A good ACID style can be made.

Here is a single VCO and an LFO that modulates the VCF. The LFO makes the VCF sounds rhythmic."

Rebach VCO GR11 and VCF-A Catch bass demo sound

Published on Oct 3, 2018 Dziam Bass

"Hey Folks.
Today I have a fast small demo with ReBach VCO GR 11 and VCF-A from the Catch series.
Rebach quite quickly develops products so it is worth keeping in mind this Dutch company.
VCF-A. The characteristic and distinctive feature of the filter is the high feedback / resonance. The almost unlimited feedback circuit produces a cheeky sound. be aware of speakers and ears!
Because of the high level of the factory tuning, the amplifiers are in the limit and therefore give a warm sound. A level control / mixer at the entrance.
The GR11 Voltage Controlled Oscillator is a simple but powerfull SAW core oscillator tuned for bass applications also as applicable as semi-LFO. The GR11 VCO generates four waveforms (SAW / SQUARE with PWM / TRI / SUB SQUARE).
The GR11 has a unique Sub section which generates a square waveform that can be adjusted in four parts. Extremely well applicable for bass! Use it as LFO or even as simple voltage / frequency controlled. 4-step sequencer or modulate a second GR11 for a wide range of deep sounds or FX."

ReBach CATCH FM&PWM demo

Published on Dec 7, 2018 ReBach

"ReBach CATCH series FM & PWM demo

In this demo two VCO-A, two ADSR-A and one VCF-A. The second ADSR modulates the PWM input of the VCO1. VCO2 modulates the FM input of VCO1. the pulse output of VCO1 passes through the filter who is modulated by ADSR 1. this delivers nice sounds, to be used as lead sound ...."

Rebach CATCH series with arpregiator from Arturia Minibrute 2

Published on Nov 22, 2018 Dziam Bass

"Hi Folks!!!
I have a little bit of this blue equipment today and more precisely modules from ReBach.
I connected them today to the arpregiator with Arturia Minibrute 2, I used here VCO-A VCF-A, ADSR-A and SMP all from the latest CATCH series from Rebach.
VCO-A sound with VCF-A filter gives really great, smooth vintage character. I also used the Black Hole DSP reverb from Erica Synths for beautiful space. It behaves very nicely in the lower bands but also in the middle is really nice.
The prices are also attractive for only 95 EUR each module, so check these modules and have them in your system."

ReBach GR series "Space" Sounds

Published on Jan 16, 2019 ReBach

"ReBach GR series sound demo

Again 2x GR11 VCO, GR21 VCF and one GR61 MIX supported with 2x CATCH ADSR. First part two nice sequences to VCO1 and VCO2. Second part we fed the SUB output of a GR11 VCO to the SYNC input or a second GR11 VCO."

New ReBach CATCH VCO-A DEMO

Published on Oct 17, 2018 ReBach

"First preview from the new CATCH Series VCO-A.

CEM3340 based Eurorack VCO with linear FM.
Very nice sounding VCO which the CEM3340 has very good tracking and temparature stability. Because of our design, this VCO has a nice round sound with a distinctive edge!

The CATCH series is an entry-level Eurorack series with minimal functions but maximum sound!

www.rebach.eu"

"CATCH VCO-A In production

Eurorack Voltage Controlled Oscillator
Another fine Eurorack oscillator based on the CEM3340.

This Oscillator from the CATCH series has three waveforms and a nice FM modulation input. He produces beautiful FM sounds and brilliant lead sounds.

Thanks to the CEM 3340 base, it has a very good CV tracking and unprecedented temperature stability!

Very skiff-friendly design. 26mm depth ( without Knobs incl ribbon connector ).

Available soon."

WFM oscillator -LA67 & Rebach VCO-A,VCF-A,ADSR-A

Dziam Bass

"Hello all.
today I patched WFM oscillator from LA67 and Rebach VCO-A, VCF-A ADSR. I added a traingle wave to FM IN in WFM and pulse waves from WFM to PWM IN in VCO rebach.
as you can see nice nice analog sound when i open more and close the filter.
This is a nice combination for me because the WFM is based on the old 1970 KOBOL oscillator and the rebate VCO based on the AS3340 so it gives a great character,
I tried to subtly add FM and open the filter for a musically working sound."

ReBach CATCH Pulse

Published on Dec 4, 2019 ReBach

"Short PWM demo with the ReBach CATCH series.

Two VCOs (VCO 1 modulates VCO 2 on the PWM input) with a VCF and an ADSR."

ReBach CATCH String sounds

Published on Nov 2, 2018 ReBach

"ReBach CATCH series String sounds demo.

Beautiful string-sounds from a eurorack is possible.

With three times the CATCH series VCO-A, one VCF-A and one ADSR-A are beautiful string-sounds to produce.
For this demo we have added the legendary Smallstone Phase Shifter. Together they make an impressive sound!"

VCO GR11 and VCF GR21 -Rebach /C Quencer DLX -Centre Village

Published on Dec 24, 2019 Dziam Bass

"Today I have a small movie with a very nice GR series from ReBach.
I used VCO GR 11 with Filter VCF GR21 from Rebach with ADSR-A from Catch series, and C Quencer DLX scale sequencer from Centre Village and delay Euro DDL from Eventide.
The GR series is great because it sounds really good and the VCO GR 11 is an SAW CORE based oscillator.
I added quite a lot of resonance later from the filter and quite a high level for slightly overdrive, can be heard after adding a large resonance.
In any case, it's best to check it out for yourself and see that this sound is really cool."

ReBach GR-11 VCO Experimental filter modulations

ReBach

"In this short demo two GR-11 VCO with one GR-21 VCF for Experimental modulation sounds.

First VCO SAW output connected to the input of the VCF. The second VCO SUB out is connected to the VCF CV input. Both VCOs receive the same 1v / oct signal. The modulation of the filter is now controlled via the four SUB level buttons"

ReBach GR-11 VCO

ReBach CATCH Series Demo

Published on Nov 1, 2018 ReBach

"A short sound demo in techno style for the ReBach CATCH series.

Two CATCH VCO-A oscillators have been used, of which one modulates the PWM of the second VCO by the Pulse output. Furthermore, there is the VCF-A and the ADSR-A."

ReBach CATCH High Pitch demo

Published on Mar 5, 2019 ReBach

"ReBach CATCH series sound demo

Here used are 2 times VCO-A / VCF-A / ADSR-A with 1 times the LFO-B. The LFO modulates the second VCO on the FM input and then the second VCO modulates the first VCO PWM input."

Rebach VCO/VCF/ADSR small sound demo

Published on Jun 11, 2019 Dziam Bass

"Hello Guys.
a small movie with the use of Rebach CATCH modules.
This is a great series of modules at an affordable price but with a very good sound, here a small movie with sound from just one VCO, Filter VCF and ADSR plus added Reverb."

ReBach GR Series effect sounds

Published on Jan 14, 2019 ReBach

"Here the GR11 VCO, GR21 VCF and GR61 MIX supported with the CATCH ADSR. In this demo the SUB output of a GR11 VCO is fed to the SYNC input of a second GR11 VCO. The ADSR controls the VCO frequency and VCF frequency."